Repository navigation
Serial Terminal Machines
There are several methods for using the BusRaider to communicate with a “serial terminal” machine. BusRaider emulates a 6850 UART by default (Machine Options for how to turn this off for a specific machine). Alternatively BusRaider can read serial data generated by a real UART (68B50 or SIO). BusRaider reads serial data from the RX/TX lines on the RC2014 bus.
The easiest way to interact with the serial terminal is to use the screen and keyboard attached to the Pi Zero. This should update quickly and give good emulation of either ANSI or H19 terminal escape codes depending on which you have selected from the drop-down list.


Once the serial channel is enabled pressing the Show Terminal button in the Web UI mirrors the serial terminal output to the Web UI. Here you can interact with the machine using the standard keyboard of the machine with the Web UI. You can also interact using the USB keyboard.
A further option is to use telnet to connect to the serial terminal. Currently this is only working with a genuine UART and not with the emulated one. To connect use either the command line telnet in Linux/Mac or a program such as Putty on Windows.