Repository navigation
BusRaider Web UI
Rob Dobson edited this page Apr 15, 2020
·
4 revisions
One of the great strengths of the BusRaider is its Web UI and in order to use this you need to be connected to a WiFi network.
Open a browser and enter one of the following:
- The IP address that your network has assigned to the BusRaider – this will be shown on the HDMI display in the yellow status text.
- The hostname (if using Chrome) that you chose when assigning WiFi settings (maybe you followed the example I gave and entered busraider)
In either case you should see the Web UI which should look something like this:
The main sections of this UI are as follows:
- Select target machine
- The drop-down list enables selection of the target machine
- The gear-icon is for settings specific to that machine - such as 6850 emulation, memory layout, etc - see the Machine Options section
- The reset button, as might be expected, resets the Z80
- Clear target buffer, program from buffer and program and execute all relate to the ability of the BusRaider to build up an memory image (from multiple downloaded files) in a "buffer" and then program the Z80s memory all at once using that image
- Show Terminal is used to display the serial output of machines which support serial communications and, in that case, mirrors the display on the HDMI target area
- Clock allows the clock of the Z80 to be changed on-the-fly
- Drop files to immediately run. Simply drop files from your file-manager onto this area and they will be uploaded and executed on the Z80
- Drop files to upload to ESP32 file system. The file system contents and buttons to run programs, etc will be shown here once you have dropped some files onto this area. This allows you to build up a set of programs that you commonly use and then run them whenever you like.
Chrome works well and, with Chrome, I have found that I can simply type the hostname that I used when I set-up the WiFi directly in the address bar to connect