Skip to content

BusRaider How It Works

Rob Dobson edited this page Dec 7, 2019 · 13 revisions

The BusRaider has a number of tricks up its sleeve:

  • An ESP32 is used for WiFi access and to provide a web-browser interface
  • A Raspberry Pi Zero is programmed in bare-metal to provide fast bus access and display generation
  • The BusRaider can request control of the RC2014’s bus using the BUSRQ line. Once requested and acknowledged the Z80 “lets go” of all the bus lines and allows the BusRaider to read/write memory and IO without interference.
  • The BusRaider “knows” when the Z80 is performing a memory/IO operation or responding to an interrupt and (using the WAIT line to ensure timing is handled properly) can:
    • respond to the memory/IO operation itself (emulating IO or memory)
    • single step through a program
    • detect debug breakpoints and pause execution at that point

Clone this wiki locally