Merge tag 'v6.1.54-rt15' into nilrt/master/6.1#137
Merged
bstreiff merged 1194 commits intoni:nilrt/master/6.1from Oct 4, 2023
Merged
Merge tag 'v6.1.54-rt15' into nilrt/master/6.1#137bstreiff merged 1194 commits intoni:nilrt/master/6.1from
bstreiff merged 1194 commits intoni:nilrt/master/6.1from
Conversation
commit 59cf445 upstream. Commit 85d07c5 ("USB: core: Unite old scheme and new scheme descriptor reads") altered the way USB devices are enumerated following detection, and in the process it messed up the initialization of SuperSpeed (or faster) devices: [ 31.650759] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd [ 31.663107] usb 2-1: device descriptor read/8, error -71 [ 31.952697] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd [ 31.965122] usb 2-1: device descriptor read/8, error -71 [ 32.080991] usb usb2-port1: attempt power cycle ... The problem was caused by the commit forgetting that in SuperSpeed or faster devices, the device descriptor uses a logarithmic encoding of the bMaxPacketSize0 value. (For some reason I thought the 255 case in the switch statement was meant for these devices, but it isn't -- it was meant for Wireless USB and is no longer needed.) We can fix the oversight by testing for buf->bMaxPacketSize0 = 9 (meaning 512, the actual maxpacket size for ep0 on all SuperSpeed devices) and straightening out the logic that checks and adjusts our initial guesses of the maxpacket value. Reported-and-tested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Closes: https://lore.kernel.org/linux-usb/20230810002257.nadxmfmrobkaxgnz@synopsys.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 85d07c5 ("USB: core: Unite old scheme and new scheme descriptor reads") Link: https://lore.kernel.org/r/8809e6c5-59d5-4d2d-ac8f-6d106658ad73@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d7d72a upstream. On large enclaves we hit the softlockup warning with following call trace: xa_erase() sgx_vepc_release() __fput() task_work_run() do_exit() The latency issue is similar to the one fixed in: 8795359 ("x86/sgx: Silence softlockup detection when releasing large enclaves") The test system has 64GB of enclave memory, and all is assigned to a single VM. Release of 'vepc' takes a longer time and causes long latencies, which triggers the softlockup warning. Add cond_resched() to give other tasks a chance to run and reduce latencies, which also avoids the softlockup detector. [ mingo: Rewrote the changelog. ] Fixes: 540745d ("x86/sgx: Introduce virtual EPC for use by KVM guests") Reported-by: Yu Zhang <yu.zhang@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Yu Zhang <yu.zhang@ionos.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Haitao Huang <haitao.huang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f7f984 upstream. Starting from SPR, the basic uncore PMON information is retrieved from the discovery table (resides in an MMIO space populated by BIOS). It is called the discovery method. The existing value of the type->num_boxes is from the discovery table. On some SPR variants, there is a firmware bug that makes the value from the discovery table incorrect. We use the value from the SPR_MSR_UNC_CBO_CONFIG MSR to replace the one from the discovery table: 38776cc ("perf/x86/uncore: Correct the number of CHAs on SPR") Unfortunately, the SPR_MSR_UNC_CBO_CONFIG isn't available for the EMR XCC (Always returns 0), but the above firmware bug doesn't impact the EMR XCC. Don't let the value from the MSR replace the existing value from the discovery table. Fixes: 38776cc ("perf/x86/uncore: Correct the number of CHAs on SPR") Reported-by: Stephane Eranian <eranian@google.com> Reported-by: Yunying Sun <yunying.sun@intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Yunying Sun <yunying.sun@intel.com> Link: https://lore.kernel.org/r/20230905134248.496114-1-kan.liang@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dabc54a ] Commit c8f71b4 ("serial: sc16is7xx: setup GPIO controller later in probe") moved GPIO setup code later in probe function. Doing so also required to move ports cleanup code (out_ports label) after the GPIO cleanup code. After these moves, the out_thread label becomes misplaced and makes part of the cleanup code illogical. This patch remove the now obsolete out_thread label and make GPIO setup code jump to out_ports label if it fails. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com> Tested-by: Lech Perczak <lech.perczak@camlingroup.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230807214556.540627-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 0499942 ("serial: sc16is7xx: fix regression with GPIO configuration") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0499942 ] Commit 679875d ("sc16is7xx: Separate GPIOs from modem control lines") and commit 21144ba ("sc16is7xx: Handle modem status lines") changed the function of the GPIOs pins to act as modem control lines without any possibility of selecting GPIO function. As a consequence, applications that depends on GPIO lines configured by default as GPIO pins no longer work as expected. Also, the change to select modem control lines function was done only for channel A of dual UART variants (752/762). This was not documented in the log message. Allow to specify GPIO or modem control line function in the device tree, and for each of the ports (A or B). Do so by using the new device-tree property named "nxp,modem-control-line-ports" (property added in separate patch). When registering GPIO chip controller, mask-out GPIO pins declared as modem control lines according to this new DT property. Fixes: 679875d ("sc16is7xx: Separate GPIOs from modem control lines") Fixes: 21144ba ("sc16is7xx: Handle modem status lines") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com> Tested-by: Lech Perczak <lech.perczak@camlingroup.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230807214556.540627-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3d07fa1 upstream. The pipe cpumask used to serialize opens between the main and percpu trace pipes is not zeroed or initialized. This can result in spurious -EBUSY returns if underlying memory is not fully zeroed. This has been observed by immediate failure to read the main trace_pipe file on an otherwise newly booted and idle system: # cat /sys/kernel/debug/tracing/trace_pipe cat: /sys/kernel/debug/tracing/trace_pipe: Device or resource busy Zero the allocation of pipe_cpumask to avoid the problem. Link: https://lore.kernel.org/linux-trace-kernel/20230831125500.986862-1-bfoster@redhat.com Cc: stable@vger.kernel.org Fixes: c2489bb ("tracing: Introduce pipe_cpumask to avoid race on trace_pipes") Reviewed-by: Zheng Yejian <zhengyejian1@huawei.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3609309 upstream. This reverts commit e101bf9. Caused a regression: Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi 21 via DisplayPort, blanks and the GPU hangs while starting the Steam game Assetto Corsa Competizione (via Proton 7.0). Example dmesg excerpt: amdgpu 0000:0c:00.0: [drm] ERROR [CRTC:82:crtc-0] flip_done timed out NMI watchdog: Watchdog detected hard LOCKUP on cpu 6 [...] RIP: 0010:amdgpu_device_rreg.part.0+0x2f/0xf0 [amdgpu] Code: 41 54 44 8d 24 b5 00 00 00 00 55 89 f5 53 48 89 fb 4c 3b a7 60 0b 00 00 73 6a 83 e2 02 74 29 4c 03 a3 68 0b 00 00 45 8b 24 24 <48> 8b 43 08 0f b7 70 3e 66 90 44 89 e0 5b 5d 41 5c 31 d2 31 c9 31 RSP: 0000:ffffb39a119dfb88 EFLAGS: 00000086 RAX: ffffffffc0eb96a0 RBX: ffff9e7963dc0000 RCX: 0000000000007fff RDX: 0000000000000000 RSI: 0000000000004ff6 RDI: ffff9e7963dc0000 RBP: 0000000000004ff6 R08: ffffb39a119dfc40 R09: 0000000000000010 R10: ffffb39a119dfc40 R11: ffffb39a119dfc44 R12: 00000000000e05ae R13: 0000000000000000 R14: ffff9e7963dc0010 R15: 0000000000000000 FS: 000000001012f6c0(0000) GS:ffff9e805eb80000(0000) knlGS:000000007fd40000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000461ca000 CR3: 00000002a8a20000 CR4: 0000000000350ee0 Call Trace: <TASK> dm_read_reg_func+0x37/0xc0 [amdgpu] generic_reg_get2+0x22/0x60 [amdgpu] optc1_get_crtc_scanoutpos+0x6a/0xc0 [amdgpu] dc_stream_get_scanoutpos+0x74/0x90 [amdgpu] dm_crtc_get_scanoutpos+0x82/0xf0 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x91/0x190 [amdgpu] ? dm_read_reg_func+0x37/0xc0 [amdgpu] amdgpu_get_vblank_counter_kms+0xb4/0x1a0 [amdgpu] dm_pflip_high_irq+0x213/0x2f0 [amdgpu] amdgpu_dm_irq_handler+0x8a/0x200 [amdgpu] amdgpu_irq_dispatch+0xd4/0x220 [amdgpu] amdgpu_ih_process+0x7f/0x110 [amdgpu] amdgpu_irq_handler+0x1f/0x70 [amdgpu] __handle_irq_event_percpu+0x46/0x1b0 handle_irq_event+0x34/0x80 handle_edge_irq+0x9f/0x240 __common_interrupt+0x66/0x110 common_interrupt+0x5c/0xd0 asm_common_interrupt+0x22/0x40 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e45352 upstream. If md_run() fails after ->active_io is initialized, then percpu_ref_exit is called in error path. However, later md_free_disk will call percpu_ref_exit again which leads to a panic because of null pointer dereference. It can also trigger this bug when resources are initialized but are freed in error path, then will be freed again in md_free_disk. BUG: kernel NULL pointer dereference, address: 0000000000000038 Oops: 0000 [ni#1] PREEMPT SMP Workqueue: md_misc mddev_delayed_delete RIP: 0010:free_percpu+0x110/0x630 Call Trace: <TASK> __percpu_ref_exit+0x44/0x70 percpu_ref_exit+0x16/0x90 md_free_disk+0x2f/0x80 disk_release+0x101/0x180 device_release+0x84/0x110 kobject_put+0x12a/0x380 kobject_put+0x160/0x380 mddev_delayed_delete+0x19/0x30 process_one_work+0x269/0x680 worker_thread+0x266/0x640 kthread+0x151/0x1b0 ret_from_fork+0x1f/0x30 For creating raid device, md raid calls do_md_run->md_run, dm raid calls md_run. We alloc those memory in md_run. For stopping raid device, md raid calls do_md_stop->__md_stop, dm raid calls md_stop->__md_stop. So we can free those memory resources in __md_stop. Fixes: 72adae2 ("md: Change active_io to percpu") Reported-and-tested-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43439d8 upstream. kfree()-ing the scratch page isn't enough, we also need to set the pointer back to NULL to avoid a double-free in the case of a resend. Fixes: fbd2a05 (NFSv4.2: Rework scratch handling for READ_PLUS) Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 303a780 upstream. I found that the read code might send multiple requests using the same nfs_pgio_header, but nfs4_proc_read_setup() is only called once. This is how we ended up occasionally double-freeing the scratch buffer, but also means we set a NULL pointer but non-zero length to the xdr scratch buffer. This results in an oops the first time decoding needs to copy something to scratch, which frequently happens when decoding READ_PLUS hole segments. I fix this by moving scratch handling into the pageio read code. I provide a function to allocate scratch space for decoding read replies, and free the scratch buffer when the nfs_pgio_header is freed. Fixes: fbd2a05 (NFSv4.2: Rework scratch handling for READ_PLUS) Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 433279b upstream. Commit 3e45352 ("md: Free resources in __md_stop") tried to fix null-ptr-deference for 'active_io' by moving percpu_ref_exit() to __md_stop(), however, the commit also moving 'writes_pending' to __md_stop(), and this will cause mdadm tests broken: BUG: kernel NULL pointer dereference, address: 0000000000000038 Oops: 0000 [ni#1] PREEMPT SMP CPU: 15 PID: 17830 Comm: mdadm Not tainted 6.3.0-rc3-next-20230324-00009-g520d37 RIP: 0010:free_percpu+0x465/0x670 Call Trace: <TASK> __percpu_ref_exit+0x48/0x70 percpu_ref_exit+0x1a/0x90 __md_stop+0xe9/0x170 do_md_stop+0x1e1/0x7b0 md_ioctl+0x90c/0x1aa0 blkdev_ioctl+0x19b/0x400 vfs_ioctl+0x20/0x50 __x64_sys_ioctl+0xba/0xe0 do_syscall_64+0x6c/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0xcd And the problem can be reporduced 100% by following test: mdadm -CR /dev/md0 -l1 -n1 /dev/sda --force echo inactive > /sys/block/md0/md/array_state echo read-auto > /sys/block/md0/md/array_state echo inactive > /sys/block/md0/md/array_state Root cause: // start raid raid1_run mddev_init_writes_pending percpu_ref_init // inactive raid array_state_store do_md_stop __md_stop percpu_ref_exit // start raid again array_state_store do_md_run raid1_run mddev_init_writes_pending if (mddev->writes_pending.percpu_count_ptr) // won't reinit // inactive raid again ... percpu_ref_exit -> null-ptr-deference Before the commit, 'writes_pending' is exited when mddev is freed, and it's safe to restart raid because mddev_init_writes_pending() already make sure that 'writes_pending' will only be initialized once. Fix the prblem by moving 'writes_pending' back, it's a litter hard to find the relationship between alloc memory and free memory, however, code changes is much less and we lived with this for a long time already. Fixes: 3e45352 ("md: Free resources in __md_stop") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230328094400.1448955-1-yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c28cd1f upstream. We already mark fwnodes as initialized when they are registered as clock providers. We do this so that fw_devlink can tell when a clock driver doesn't use the driver core framework to probe/initialize its device. This ensures fw_devlink doesn't block the consumers of such a clock provider indefinitely. However, some users of CLK_OF_DECLARE() macros don't use the same node that matches the macro as the node for the clock provider, but they initialize the entire node. To cover these cases, also mark the nodes that match the macros as initialized when the init callback function is called. An example of this is "stericsson,u8500-clks" that's handled using CLK_OF_DECLARE() and looks something like this: clocks { compatible = "stericsson,u8500-clks"; prcmu_clk: prcmu-clock { #clock-cells = <1>; }; prcc_pclk: prcc-periph-clock { #clock-cells = <2>; }; prcc_kclk: prcc-kernel-clock { #clock-cells = <2>; }; prcc_reset: prcc-reset-controller { #reset-cells = <2>; }; ... }; This patch makes sure that "clocks" is marked as initialized so that fw_devlink knows that all nodes under it have been initialized. If the driver creates struct devices for some of the subnodes, fw_devlink is smart enough to know to wait for those devices to probe, so no special handling is required for those cases. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reported-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/lkml/CACRpkdamxDX6EBVjKX5=D3rkHp17f5pwGdBVhzFU90-0MHY6dQ@mail.gmail.com/ Fixes: 4a03282 ("of: property: Simplify of_link_to_phandle()") Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20230302014639.297514-1-saravanak@google.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a50d94 upstream. When loading a DT overlay that creates a device, the device is not probed, unless the DT overlay is unloaded and reloaded again. After the recent refactoring to improve fw_devlink, it no longer depends on the "compatible" property to identify which device tree nodes will become struct devices. fw_devlink now picks up dangling consumers (consumers pointing to descendent device tree nodes of a device that aren't converted to child devices) when a device is successfully bound to a driver. See __fw_devlink_pickup_dangling_consumers(). However, during DT overlay, a device's device tree node can have sub-nodes added/removed without unbinding/rebinding the driver. This difference in behavior between the normal device instantiation and probing flow vs. the DT overlay flow has a bunch of implications that are pointed out elsewhere[1]. One of them is that the fw_devlink logic to pick up dangling consumers is never exercised. This patch solves the fw_devlink issue by marking all DT nodes added by DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become device), and by clearing the flag when a struct device is actually created for the DT node. This way, fw_devlink knows not to have consumers waiting on these newly added DT nodes, and to propagate the dependency to an ancestor DT node that has the corresponding struct device. Based on a patch by Saravana Kannan, which covered only platform and spi devices. [1] https://lore.kernel.org/r/CAGETcx_bkuFaLCiPrAWCPQz+w79ccDp6=9e881qmK=vx3hBMyg@mail.gmail.com Fixes: 4a03282 ("of: property: Simplify of_link_to_phandle()") Link: https://lore.kernel.org/r/CAGETcx_+rhHvaC_HJXGrr5_WAd2+k5f=rWYnkCZ6z5bGX-wj4w@mail.gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Saravana Kannan <saravanak@google.com> Tested-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Link: https://lore.kernel.org/r/e1fa546682ea4c8474ff997ab6244c5e11b6f8bc.1680182615.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cf9d01 upstream. After commit c28cd1f ("clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro"), drivers/clk/mvebu/kirkwood.c fails to build: drivers/clk/mvebu/kirkwood.c:358:1: error: expected identifier or '(' CLK_OF_DECLARE(98dx1135_clk, "marvell,mv98dx1135-core-clock", ^ include/linux/clk-provider.h:1367:21: note: expanded from macro 'CLK_OF_DECLARE' static void __init name##_of_clk_init_declare(struct device_node *np) \ ^ <scratch space>:124:1: note: expanded from here 98dx1135_clk_of_clk_init_declare ^ drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE' OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare) ^ <scratch space>:125:3: note: expanded from here 98dx1135_clk_of_clk_init_declare ^ drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE' OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare) ^ <scratch space>:125:3: note: expanded from here 98dx1135_clk_of_clk_init_declare ^ drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE' OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare) ^ <scratch space>:125:3: note: expanded from here 98dx1135_clk_of_clk_init_declare ^ C function names must start with either an alphabetic letter or an underscore. To avoid generating invalid function names from clock names, add two underscores to the beginning of the identifier. Fixes: c28cd1f ("clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro") Suggested-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230308-clk_of_declare-fix-v1-1-317b741e2532@kernel.org Reviewed-by: Saravana Kannan <saravanak@google.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23970a1 upstream. The clang build reports this error fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (*err < 0) ^~~~~~~~ newblock is never set before error handling jump. Initialize newblock to 0 and remove redundant settings. Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20221230175341.1629734-1-trix@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230911134633.619970489@linuxfoundation.org Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Ron Economos <re@w6rz.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io_mapping_map_atomic_wc() disables preemption and pagefaults for historical reasons. The conversion to io_mapping_map_local_wc(), which only disables migration, cannot be done wholesale because quite some call sites need to be updated to accommodate with the changed semantics. On PREEMPT_RT enabled kernels the io_mapping_map_atomic_wc() semantics are problematic due to the implicit disabling of preemption which makes it impossible to acquire 'sleeping' spinlocks within the mapped atomic sections. PREEMPT_RT replaces the preempt_disable() with a migrate_disable() for more than a decade. It could be argued that this is a justification to do this unconditionally, but PREEMPT_RT covers only a limited number of architectures and it disables some functionality which limits the coverage further. Limit the replacement to PREEMPT_RT for now. This is also done kmap_atomic(). Link: https://lkml.kernel.org/r/20230310162905.O57Pj7hh@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reported-by: Richard Weinberger <richard.weinberger@gmail.com> Link: https://lore.kernel.org/CAFLxGvw0WMxaMqYqJ5WgvVSbKHq2D2xcXTOgMCpgq9nDC-MWTQ@mail.gmail.com Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> (cherry picked from commit 7eb16f2) Signed-off-by: Clark Williams <clark.williams@gmail.com>
On PREEMPT_RT, rw_semaphore and rwlock_t locks are unfair to writers. Readers can indefinitely acquire the lock unless the writer fully acquired the lock, which might never happen if there is always a reader in the critical section owning the lock. Mel Gorman reported that since LTP-20220121 the dio_truncate test case went from having 1 reader to having 16 readers and that number of readers is sufficient to prevent the down_write ever succeeding while readers exist. Eventually the test is killed after 30 minutes as a failure. Mel proposed a timeout to limit how long a writer can be blocked until the reader is forced into the slowpath. Thomas argued that there is no added value by providing this timeout. From a PREEMPT_RT point of view, there are no critical rw_semaphore or rwlock_t locks left where the reader must be preferred. Mitigate indefinite writer starvation by forcing the READER into the slowpath once the WRITER attempts to acquire the lock. Reported-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/877cwbq4cq.ffs@tglx Link: https://lore.kernel.org/r/20230321161140.HMcQEhHb@linutronix.de Cc: Linus Torvalds <torvalds@linux-foundation.org> (cherry picked from commit 286deb7) Signed-off-by: Clark Williams <clark.williams@gmail.com>
Due to the mentioned commit, when the ksoftirqd processes take charge of softirq processing, the system can experience high latencies. In the past a few workarounds have been implemented for specific side-effects of the above: commit 1ff6882 ("watchdog: core: make sure the watchdog_worker is not deferred") commit 8d5755b ("watchdog: softdog: fire watchdog even if softirqs do not get to run") commit 217f697 ("net: busy-poll: allow preemption in sk_busy_loop()") commit 3c53776 ("Mark HI and TASKLET softirq synchronous") but the latency problem still exists in real-life workloads, see the link below. The reverted commit intended to solve a live-lock scenario that can now be addressed with the NAPI threaded mode, introduced with commit 29863d4 ("net: implement threaded-able napi poll loop support"), and nowadays in a pretty stable status. While a complete solution to put softirq processing under nice resource control would be preferable, that has proven to be a very hard task. In the short term, remove the main pain point, and also simplify a bit the current softirq implementation. Note that this change also reverts commit 3c53776 ("Mark HI and TASKLET softirq synchronous") and commit 1342d80 ("softirq: Don't skip softirq execution when softirq thread is parking"), which are direct follow-ups of the feature commit. A single change is preferred to avoid known bad intermediate states introduced by a patch series reverting them individually. Link: https://lore.kernel.org/netdev/305d7742212cbe98621b16be782b0562f1012cb6.camel@redhat.com/ Signed-off-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/57e66b364f1b6f09c9bc0316742c3b14f4ce83bd.1683526542.git.pabeni@redhat.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> (cherry picked from commit b8a04a538ed4755dc97c403ee3b8dd882955c98c) Signed-off-by: Clark Williams <clark.williams@gmail.com>
Under PREEMPT_RT, __put_task_struct() indirectly acquires sleeping
locks. Therefore, it can't be called from an non-preemptible context.
One practical example is splat inside inactive_task_timer(), which is
called in a interrupt context:
CPU: 1 PID: 2848 Comm: life Kdump: loaded Tainted: G W ---------
Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/15/2012
Call Trace:
dump_stack_lvl+0x57/0x7d
mark_lock_irq.cold+0x33/0xba
? stack_trace_save+0x4b/0x70
? save_trace+0x55/0x150
mark_lock+0x1e7/0x400
mark_usage+0x11d/0x140
__lock_acquire+0x30d/0x930
lock_acquire.part.0+0x9c/0x210
? refill_obj_stock+0x3d/0x3a0
? rcu_read_lock_sched_held+0x3f/0x70
? trace_lock_acquire+0x38/0x140
? lock_acquire+0x30/0x80
? refill_obj_stock+0x3d/0x3a0
rt_spin_lock+0x27/0xe0
? refill_obj_stock+0x3d/0x3a0
refill_obj_stock+0x3d/0x3a0
? inactive_task_timer+0x1ad/0x340
kmem_cache_free+0x357/0x560
inactive_task_timer+0x1ad/0x340
? switched_from_dl+0x2d0/0x2d0
__run_hrtimer+0x8a/0x1a0
__hrtimer_run_queues+0x91/0x130
hrtimer_interrupt+0x10f/0x220
__sysvec_apic_timer_interrupt+0x7b/0xd0
sysvec_apic_timer_interrupt+0x4f/0xd0
? asm_sysvec_apic_timer_interrupt+0xa/0x20
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0033:0x7fff196bf6f5
Instead of calling __put_task_struct() directly, we defer it using
call_rcu(). A more natural approach would use a workqueue, but since
in PREEMPT_RT, we can't allocate dynamic memory from atomic context,
the code would become more complex because we would need to put the
work_struct instance in the task_struct and initialize it when we
allocate a new task_struct.
The issue is reproducible with stress-ng:
while true; do
stress-ng --sched deadline --sched-period 1000000000 \
--sched-runtime 800000000 --sched-deadline \
1000000000 --mmapfork 23 -t 20
done
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reported-by: Hu Chunyu <chuhu@redhat.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/r/20230614122323.37957-2-wander@redhat.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
(cherry picked from commit 053ba1b91e511ad3a76ee9eeae4141734de31bed)
Signed-off-by: Clark Williams <clark.williams@gmail.com>
…lation There is an explicit wait-type violation in debug_object_fill_pool() for PREEMPT_RT=n kernels which allows them to more easily fill the object pool and reduce the chance of allocation failures. Lockdep's wait-type checks are designed to check the PREEMPT_RT locking rules even for PREEMPT_RT=n kernels and object to this, so create a lockdep annotation to allow this to stand. Specifically, create a 'lock' type that overrides the inner wait-type while it is held -- allowing one to temporarily raise it, such that the violation is hidden. Reported-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Qi Zheng <zhengqi.arch@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Qi Zheng <zhengqi.arch@bytedance.com> Link: https://lkml.kernel.org/r/20230429100614.GA1489784@hirez.programming.kicks-ass.net (cherry picked from commit 0cce06b) Signed-off-by: Clark Williams <clark.williams@gmail.com>
In put_task_struct(), a spin_lock is indirectly acquired under the kernel stock. When running the kernel in real-time (RT) configuration, the operation is dispatched to a preemptible context call to ensure guaranteed preemption. However, if PROVE_RAW_LOCK_NESTING is enabled and __put_task_struct() is called while holding a raw_spinlock, lockdep incorrectly reports an "Invalid lock context" in the stock kernel. This false splat occurs because lockdep is unaware of the different route taken under RT. To address this issue, override the inner wait type to prevent the false lockdep splat. Signed-off-by: Wander Lairson Costa <wander@redhat.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Suggested-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Luis Goncalves <lgoncalv@redhat.com> Link: https://lore.kernel.org/r/20230614122323.37957-3-wander@redhat.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> (cherry picked from commit a5e446e728e89d5f5c5e427cc919bc7813c64c28) Signed-off-by: Clark Williams <clark.williams@gmail.com>
…t_begin_nested() It was brought up by Tetsuo that the following sequence write_seqlock_irqsave() printk_deferred_enter() could lead to a deadlock if the lockdep annotation within write_seqlock_irqsave() triggers. The problem is that the sequence counter is incremented before the lockdep annotation is performed. The lockdep splat would then attempt to invoke printk() but the reader side, of the same seqcount, could have a tty_port::lock acquired waiting for the sequence number to become even again. The other lockdep annotations come before the actual locking because "we want to see the locking error before it happens". There is no reason why seqcount should be different here. Do the lockdep annotation first then perform the locking operation (the sequence increment). Fixes: 1ca7d67 ("seqcount: Add lockdep functionality to seqcount/seqlock structures") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/20230621130641.-5iueY1I@linutronix.de Link: https://lore.kernel.org/r/20230623171232.892937-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> (cherry picked from commit dc93c1f07d485c6d29b49844add0e8d5d705b9cf) Signed-off-by: Clark Williams <clark.williams@gmail.com>
…local_irq_save(). __build_all_zonelists() acquires zonelist_update_seq by first disabling interrupts via local_irq_save() and then acquiring the seqlock with write_seqlock(). This is troublesome and leads to problems on PREEMPT_RT. The problem is that the inner spinlock_t becomes a sleeping lock on PREEMPT_RT and must not be acquired with disabled interrupts. The API provides write_seqlock_irqsave() which does the right thing in one step. printk_deferred_enter() has to be invoked in non-migrate-able context to ensure that deferred printing is enabled and disabled on the same CPU. This is the case after zonelist_update_seq has been acquired. There was discussion on the first submission that the order should be: local_irq_disable(); printk_deferred_enter(); write_seqlock(); to avoid pitfalls like having an unaccounted printk() coming from write_seqlock_irqsave() before printk_deferred_enter() is invoked. The only origin of such a printk() can be a lockdep splat because the lockdep annotation happens after the sequence count is incremented. This is exceptional and subject to change. It was also pointed that PREEMPT_RT can be affected by the printk problem since its write_seqlock_irqsave() does not really disable interrupts. This isn't the case because PREEMPT_RT's printk implementation differs from the mainline implementation in two important aspects: - Printing happens in a dedicated threads and not at during the invocation of printk(). - In emergency cases where synchronous printing is used, a different driver is used which does not use tty_port::lock. Acquire zonelist_update_seq with write_seqlock_irqsave() and then defer printk output. Fixes: 1007843 ("mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock") Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20230623201517.yw286Knb@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> (cherry picked from commit 4d1139baae8bc4fff3728d1d204bdb04c13dbe10) Signed-off-by: Clark Williams <clark.williams@gmail.com>
bpf_free_inode() is invoked as a RCU callback. Usually RCU callbacks are invoked within softirq context. By setting rcutree.use_softirq=0 boot option the RCU callbacks will be invoked in a per-CPU kthread with bottom halves disabled which implies a RCU read section. On PREEMPT_RT the context remains fully preemptible. The RCU read section however does not allow schedule() invocation. The latter happens in mutex_lock() performed by bpf_trampoline_unlink_prog() originated from bpf_link_put(). It was pointed out that the bpf_link_put() invocation should not be delayed if originated from close(). It was also pointed out that other invocations from within a syscall should also avoid the workqueue. Everyone else should use workqueue by default to remain safe in the future (while auditing the code, every caller was preemptible except for the RCU case). Let bpf_link_put() use the worker unconditionally. Add bpf_link_put_direct() which will directly free the resources and is used by close() and from within __sys_bpf(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230614083430.oENawF8f@linutronix.de (cherry picked from commit ab5d47b) Signed-off-by: Clark Williams <clark.williams@gmail.com>
posix_timer_add() tries to allocate a posix timer ID by starting from the
cached ID which was stored by the last successful allocation.
This is done in a loop searching the ID space for a free slot one by
one. The loop has to terminate when the search wrapped around to the
starting point.
But that's racy vs. establishing the starting point. That is read out
lockless, which leads to the following problem:
CPU0 CPU1
posix_timer_add()
start = sig->posix_timer_id;
lock(hash_lock);
... posix_timer_add()
if (++sig->posix_timer_id < 0)
start = sig->posix_timer_id;
sig->posix_timer_id = 0;
So CPU1 can observe a negative start value, i.e. -1, and the loop break
never happens because the condition can never be true:
if (sig->posix_timer_id == start)
break;
While this is unlikely to ever turn into an endless loop as the ID space is
huge (INT_MAX), the racy read of the start value caught the attention of
KCSAN and Dmitry unearthed that incorrectness.
Rewrite it so that all id operations are under the hash lock.
Reported-by: syzbot+5c54bd3eb218bb595aa9@syzkaller.appspotmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87bkhzdn6g.ffs@tglx
(cherry picked from commit 8ce8849)
Signed-off-by: Clark Williams <clark.williams@gmail.com>
[commit 40cd2835ced288789a685aa4aa7bc04b492dcd45 in linux-rt-devel] Commit ade8a0f ("drm/i915: Make all GPU resets atomic") added a preempt disable section over the hardware reset callback to prepare the driver for being able to reset from atomic contexts. In retrospect I can see that the work item at a time was about removing the struct mutex from the reset path. Code base also briefly entertained the idea of doing the reset under stop_machine in order to serialize userspace mmap and temporary glitch in the fence registers (see eb8d0f5 ("drm/i915: Remove GPU reset dependence on struct_mutex"), but that never materialized and was soon removed in 2caffbf ("drm/i915: Revoke mmaps and prevent access to fence registers across reset") and replaced with a SRCU based solution. As such, as far as I can see, today we still have a requirement that resets must not sleep (invoked from submission tasklets), but no need to support invoking them from a truly atomic context. Given that the preemption section is problematic on RT kernels, since the uncore lock becomes a sleeping lock and so is invalid in such section, lets try and remove it. Potential downside is that our short waits on GPU to complete the reset may get extended if CPU scheduling interferes, but in practice that probably isn't a deal breaker. In terms of mechanics, since the preemption disabled block is being removed we just need to replace a few of the wait_for_atomic macros into busy looping versions which will work (and not complain) when called from non-atomic sections. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20230705093025.3689748-1-tvrtko.ursulin@linux.intel.com Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [PG: backport from v6.4-rt ; minor context fixup caused by b7d70b8] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Clark Williams <williams@redhat.com>
Signed-off-by: Clark Williams <clrkwllms@kernel.org>
commit a5e2151 upstream. __skb_get_hash_symmetric() was added to compute a symmetric hash over the protocol, addresses and transport ports, by commit eb70db8 ("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate IPv4 addresses, IPv6 addresses and ports. However, it should not specify the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further dissection when an IPv6 flow label is encountered, making transport ports not being incorporated in such case. As a consequence, the symmetric hash is based on 5-tuple for IPv4 but 3-tuple for IPv6 when flow label is present. It caused a few problems, e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash to perform load balancing as different L4 flows between two given IPv6 addresses would always get the same symmetric hash, leading to uneven traffic distribution. Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently. Fixes: eb70db8 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.") Reported-by: Lars Ekman <uablrek@gmail.com> Closes: antrea-io/antrea#5457 Signed-off-by: Quan Tian <qtian@vmware.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6df1b22 upstream. lru_gen_folio will be chained into per-node lists by the coming lrugen->list. Link: https://lkml.kernel.org/r/20221222041905.2431096-3-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…ch reset [ Upstream commit 86899e9 ] Currently, when we add the first sja1105 port to a bridge with vlan_filtering 1, then we sometimes see this output: sja1105 spi2.2: port 4 failed to read back entry for be:79:b4:9e:9e:96 vid 3088: -ENOENT sja1105 spi2.2: Reset switch and programmed static config. Reason: VLAN filtering sja1105 spi2.2: port 0 failed to add be:79:b4:9e:9e:96 vid 0 to fdb: -2 It is because sja1105_fdb_add() runs from the dsa_owq which is no longer serialized with switch resets since it dropped the rtnl_lock() in the blamed commit. Either performing the FDB accesses before the reset, or after the reset, is equally fine, because sja1105_static_fdb_change() backs up those changes in the static config, but FDB access during reset isn't ok. Make sja1105_static_config_reload() take the fdb_lock to fix that. Fixes: 0faf890 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7b8d60 ] According to the document of napi, there is no rx process when the budget is 0. Therefore, r8152_poll() has to return 0 directly when the budget is equal to 0. Fixes: d2187f8 ("r8152: divide the tx and rx bottom functions") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c821a88 ] syzbot reported a memory leak like below: BUG: memory leak unreferenced object 0xffff88810b088c00 (size 240): comm "syz-executor186", pid 5012, jiffies 4294943306 (age 13.680s) hex dump (first 32 bytes): 00 89 08 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff83e5d5ff>] __alloc_skb+0x1ef/0x230 net/core/skbuff.c:634 [<ffffffff84606e59>] alloc_skb include/linux/skbuff.h:1289 [inline] [<ffffffff84606e59>] kcm_sendmsg+0x269/0x1050 net/kcm/kcmsock.c:815 [<ffffffff83e479c6>] sock_sendmsg_nosec net/socket.c:725 [inline] [<ffffffff83e479c6>] sock_sendmsg+0x56/0xb0 net/socket.c:748 [<ffffffff83e47f55>] ____sys_sendmsg+0x365/0x470 net/socket.c:2494 [<ffffffff83e4c389>] ___sys_sendmsg+0xc9/0x130 net/socket.c:2548 [<ffffffff83e4c536>] __sys_sendmsg+0xa6/0x120 net/socket.c:2577 [<ffffffff84ad7bb8>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84ad7bb8>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append newly allocated skbs to 'head'. If some bytes are copied, an error occurred, and jumped to out_error label, 'last_skb' is left unmodified. A later kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the 'head' frag_list and causing the leak. This patch fixes this issue by properly updating the last allocated skb in 'last_skb'. Fixes: ab7ac4e ("kcm: Kernel Connection Multiplexor module") Reported-and-tested-by: syzbot+6f98de741f7dbbfc4ccb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6f98de741f7dbbfc4ccb Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
…ptors [ Upstream commit 78034cb ] This commit fixes tmfifo console stuck issue when the virtual networking interface is in down state. In such case, the network Rx descriptors runs out and causes the Rx network packet staying in the head of the tmfifo thus blocking the console packets. The fix is to drop the Rx network packet when no more Rx descriptors. Function name mlxbf_tmfifo_release_pending_pkt() is also renamed to mlxbf_tmfifo_release_pkt() to be more approperiate. Fixes: 1357dfd ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc") Signed-off-by: Liming Sun <limings@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/8c0177dc938ae03f52ff7e0b62dbeee74b7bec09.1693322547.git.limings@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc4c655 ] This commit drops over-sized network packets to avoid tmfifo queue stuck. Fixes: 1357dfd ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc") Signed-off-by: Liming Sun <limings@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/9318936c2447f76db475c985ca6d91f057efcd41.1693322547.git.limings@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80ccd40 ] Replace sprintf with sysfs_emit where possible. Size check in mlxbf_pmc_event_list_show should account for "\0". Fixes: 1a218d3 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/bef39ef32319a31b32f999065911f61b0d3b17c3.1693917738.git.shravankr@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f59694 ] This fix involves 2 changes: - All event regs have a reset value of 0, which is not a valid event_number as per the event_list for most blocks and hence seen as an error. Add a "disable" event with event_number 0 for all blocks. - The enable bit for each counter need not be checked before reading the event info, and hence removed. Fixes: 1a218d3 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/04d0213932d32681de1c716b54320ed894e52425.1693917738.git.shravankr@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a138f1 ] The only probing method supported by the Nvidia SN2201 platform driver is probing through an ACPI match table. Hence add a dependency on ACPI, to prevent asking the user about this driver when configuring a kernel without ACPI support. Fixes: 662f248 ("platform/mellanox: Add support for new SN2201 system") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Vadim Pasternak <vadimp@nvidia.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/ec5a4071691ab08d58771b7732a9988e89779268.1693828363.git.geert+renesas@glider.be Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfaa80c ] I got the below warning when do fuzzing test: BUG: KASAN: null-ptr-deref in scatterwalk_copychunks+0x320/0x470 Read of size 4 at addr 0000000000000008 by task kworker/u8:1/9 CPU: 0 PID: 9 Comm: kworker/u8:1 Tainted: G OE Hardware name: linux,dummy-virt (DT) Workqueue: pencrypt_parallel padata_parallel_worker Call trace: dump_backtrace+0x0/0x420 show_stack+0x34/0x44 dump_stack+0x1d0/0x248 __kasan_report+0x138/0x140 kasan_report+0x44/0x6c __asan_load4+0x94/0xd0 scatterwalk_copychunks+0x320/0x470 skcipher_next_slow+0x14c/0x290 skcipher_walk_next+0x2fc/0x480 skcipher_walk_first+0x9c/0x110 skcipher_walk_aead_common+0x380/0x440 skcipher_walk_aead_encrypt+0x54/0x70 ccm_encrypt+0x13c/0x4d0 crypto_aead_encrypt+0x7c/0xfc pcrypt_aead_enc+0x28/0x84 padata_parallel_worker+0xd0/0x2dc process_one_work+0x49c/0xbdc worker_thread+0x124/0x880 kthread+0x210/0x260 ret_from_fork+0x10/0x18 This is because the value of rec_seq of tls_crypto_info configured by the user program is too large, for example, 0xffffffffffffff. In addition, TLS is asynchronously accelerated. When tls_do_encryption() returns -EINPROGRESS and sk->sk_err is set to EBADMSG due to rec_seq overflow, skmsg is released before the asynchronous encryption process ends. As a result, the UAF problem occurs during the asynchronous processing of the encryption module. If the operation is asynchronous and the encryption module returns EINPROGRESS, do not free the record information. Fixes: 635d939 ("net/tls: free record only on encryption error") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20230909081434.2324940-1-liujian56@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee4e92c ] Enable transmission and reception of PTP unicast packets by updating PTP unicast config bit and setting current HW mac address as allowed address in PTP unicast filter registers. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 403f0e7 ("net: macb: fix sleep inside spinlock") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 403f0e7 ] macb_set_tx_clk() is called under a spinlock but itself calls clk_set_rate() which can sleep. This results in: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 | pps pps1: new PPS source ptp1 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 40, name: kworker/u4:3 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | 4 locks held by kworker/u4:3/40: | #0: ffff000003409148 | macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered. | ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | ni#1: ffff8000833cbdd8 ((work_completion)(&pl->resolve)){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | ni#2: ffff000004f01578 (&pl->state_mutex){+.+.}-{4:4}, at: phylink_resolve+0x44/0x4e8 | ni#3: ffff000004f06f50 (&bp->lock){....}-{3:3}, at: macb_mac_link_up+0x40/0x2ac | irq event stamp: 113998 | hardirqs last enabled at (113997): [<ffff800080e8503c>] _raw_spin_unlock_irq+0x30/0x64 | hardirqs last disabled at (113998): [<ffff800080e84478>] _raw_spin_lock_irqsave+0xac/0xc8 | softirqs last enabled at (113608): [<ffff800080010630>] __do_softirq+0x430/0x4e4 | softirqs last disabled at (113597): [<ffff80008001614c>] ____do_softirq+0x10/0x1c | CPU: 0 PID: 40 Comm: kworker/u4:3 Not tainted 6.5.0-11717-g9355ce8b2f50-dirty #368 | Hardware name: ... ZynqMP ... (DT) | Workqueue: events_power_efficient phylink_resolve | Call trace: | dump_backtrace+0x98/0xf0 | show_stack+0x18/0x24 | dump_stack_lvl+0x60/0xac | dump_stack+0x18/0x24 | __might_resched+0x144/0x24c | __might_sleep+0x48/0x98 | __mutex_lock+0x58/0x7b0 | mutex_lock_nested+0x24/0x30 | clk_prepare_lock+0x4c/0xa8 | clk_set_rate+0x24/0x8c | macb_mac_link_up+0x25c/0x2ac | phylink_resolve+0x178/0x4e8 | process_one_work+0x1ec/0x51c | worker_thread+0x1ec/0x3e4 | kthread+0x120/0x124 | ret_from_fork+0x10/0x20 The obvious fix is to move the call to macb_set_tx_clk() out of the protected area. This seems safe as rx and tx are both disabled anyway at this point. It is however not entirely clear what the spinlock shall protect. It could be the read-modify-write access to the NCFGR register, but this is accessed in macb_set_rx_mode() and macb_set_rxcsum_feature() as well without holding the spinlock. It could also be the register accesses done in mog_init_rings() or macb_init_buffers(), but again these functions are called without holding the spinlock in macb_hresp_error_task(). The locking seems fishy in this driver and it might deserve another look before this patch is applied. Fixes: 633e98a ("net: macb: use resolved link config in mac_link_up()") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20230908112913.1701766-1-s.hauer@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cdd9f1 ] ip6_sock_set_addr_preferences() second argument should be an integer. SUNRPC attempts to set IPV6_PREFER_SRC_PUBLIC were translated to IPV6_PREFER_SRC_TMP Fixes: 18d5ad6 ("ipv6: add ip6_sock_set_addr_preferences") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230911154213.713941-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cdc322 ] Some code defines the IPv6 wildcard address as a local variable and use it with memcmp() or ipv6_addr_equal(). Let's use in6addr_any and ipv6_addr_any() instead. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: aa99e5f ("tcp: Fix bind() regression for v4-mapped-v6 wildcard address.") Signed-off-by: Sasha Levin <sashal@kernel.org>
…match(_addr_any). [ Upstream commit c6d2770 ] This is a prep patch to make the following patches cleaner that touch inet_bind2_bucket_match() and inet_bind2_bucket_match_addr_any(). Both functions have duplicated comparison for netns, port, and l3mdev. Let's factorise them. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: aa99e5f ("tcp: Fix bind() regression for v4-mapped-v6 wildcard address.") Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa99e5f ] Andrei Vagin reported bind() regression with strace logs. If we bind() a TCPv6 socket to ::FFFF:0.0.0.0 and then bind() a TCPv4 socket to 127.0.0.1, the 2nd bind() should fail but now succeeds. from socket import * s1 = socket(AF_INET6, SOCK_STREAM) s1.bind(('::ffff:0.0.0.0', 0)) s2 = socket(AF_INET, SOCK_STREAM) s2.bind(('127.0.0.1', s1.getsockname()[1])) During the 2nd bind(), if tb->family is AF_INET6 and sk->sk_family is AF_INET in inet_bind2_bucket_match_addr_any(), we still need to check if tb has the v4-mapped-v6 wildcard address. The example above does not work after commit 5456262 ("net: Fix incorrect address comparison when searching for a bind2 bucket"), but the blamed change is not the commit. Before the commit, the leading zeros of ::FFFF:0.0.0.0 were treated as 0.0.0.0, and the sequence above worked by chance. Technically, this case has been broken since bhash2 was introduced. Note that if we bind() two sockets to 127.0.0.1 and then ::FFFF:0.0.0.0, the 2nd bind() fails properly because we fall back to using bhash to detect conflicts for the v4-mapped-v6 address. Fixes: 28044fc ("net: Add a bhash2 table hashed by port and address") Reported-by: Andrei Vagin <avagin@google.com> Closes: https://lore.kernel.org/netdev/ZPuYBOFC8zsK6r9T@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c48ef9c ] Since bhash2 was introduced, the example below does not work as expected. These two bind() should conflict, but the 2nd bind() now succeeds. from socket import * s1 = socket(AF_INET6, SOCK_STREAM) s1.bind(('::ffff:127.0.0.1', 0)) s2 = socket(AF_INET, SOCK_STREAM) s2.bind(('127.0.0.1', s1.getsockname()[1])) During the 2nd bind() in inet_csk_get_port(), inet_bind2_bucket_find() fails to find the 1st socket's tb2, so inet_bind2_bucket_create() allocates a new tb2 for the 2nd socket. Then, we call inet_csk_bind_conflict() that checks conflicts in the new tb2 by inet_bhash2_conflict(). However, the new tb2 does not include the 1st socket, thus the bind() finally succeeds. In this case, inet_bind2_bucket_match() must check if AF_INET6 tb2 has the conflicting v4-mapped-v6 address so that inet_bind2_bucket_find() returns the 1st socket's tb2. Note that if we bind two sockets to 127.0.0.1 and then ::FFFF:127.0.0.1, the 2nd bind() fails properly for the same reason mentinoed in the previous commit. Fixes: 28044fc ("net: Add a bhash2 table hashed by port and address") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c44191 ] The commit in fixes introduced flags to control the status of hardware configuration while processing packets. At the same time another structure is used to provide configuration of timestamper to user-space applications. The way it was coded makes this structures go out of sync easily. The repro is easy for 82599 chips: [root@hostname ~]# hwstamp_ctl -i eth0 -r 12 -t 1 current settings: tx_type 0 rx_filter 0 new settings: tx_type 1 rx_filter 12 The eth0 device is properly configured to timestamp any PTPv2 events. [root@hostname ~]# hwstamp_ctl -i eth0 -r 1 -t 1 current settings: tx_type 1 rx_filter 12 SIOCSHWTSTAMP failed: Numerical result out of range The requested time stamping mode is not supported by the hardware. The error is properly returned because HW doesn't support all packets timestamping. But the adapter->flags is cleared of timestamp flags even though no HW configuration was done. From that point no RX timestamps are received by user-space application. But configuration shows good values: [root@hostname ~]# hwstamp_ctl -i eth0 current settings: tx_type 1 rx_filter 12 Fix the issue by applying new flags only when the HW was actually configured. Fixes: a9763f3 ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a22730b ] syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88 ("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by updating kcm_tx_msg(head)->last_skb if partial data is copied so that the following sendmsg() will resume from the skb. However, we cannot know how many bytes were copied when we get the error. Thus, we could mess up the MSG_MORE queue. When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we do so for UDP by udp_flush_pending_frames(). Even without this change, when the error occurred, the following sendmsg() resumed from a wrong skb and the queue was messed up. However, we have yet to get such a report, and only syzkaller stumbled on it. So, this can be changed safely. Note this does not change SOCK_SEQPACKET behaviour. Fixes: c821a88 ("kcm: Fix memory leak in error path of kcm_sendmsg()") Fixes: ab7ac4e ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230912022753.33327-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4fe4a63 upstream. We have originally guarded fiddling with CHECKFLAGS in our arch Makefile by checking for the CONFIG_MIPS variable, not set for targets such as `distclean', etc. that neither include `.config' nor use the compiler. Starting from commit 805b2e1 ("kbuild: include Makefile.compiler only when compiler is needed") we have had a generic `need-compiler' variable explicitly telling us if the compiler will be used and thus its capabilities need to be checked and expressed in the form of compilation flags. If this variable is not set, then `make' functions such as `cc-option' are undefined, causing all kinds of weirdness to happen if we expect specific results to be returned, most recently: cc1: error: '-mloongson-mmi' must be used with '-mhard-float' messages with configurations such as `fuloong2e_defconfig' and the `modules_install' target, which does include `.config' and yet does not use the compiler. Replace the check for CONFIG_MIPS with one for `need-compiler' instead, so as to prevent the compiler from being ever called for CHECKFLAGS when not needed. Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Closes: https://lore.kernel.org/r/85031c0c-d981-031e-8a50-bc4fad2ddcd8@collabora.com/ Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 805b2e1 ("kbuild: include Makefile.compiler only when compiler is needed") Cc: stable@vger.kernel.org # v5.13+ Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d028d5 upstream. [WHY] Currently, when insert_plane is called with insert_above_mpcc parameter that is equal to tree->opp_list, the function returns NULL. [HOW] Instead, the function should insert the plane at the top of the tree. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230917191040.964416434@linuxfoundation.org Tested-by: SeongJae Park <sj@kernel.org> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 6.1.54 stable release
Signed-off-by: Clark Williams <clrkwllms@kernel.org>
Linux 6.1.54-rt15 Signed-off-by: Xander Huff <xander.huff@ni.com>
gratian
approved these changes
Oct 3, 2023
bstreiff
approved these changes
Oct 4, 2023
gratian
pushed a commit
to gratian/linux
that referenced
this pull request
Jun 10, 2024
[ Upstream commit 1eb52a6 ] Fix uaf in xfs_trans_ail_delete during xlog force shutdown. In commit cd6f79d ("xfs: run callbacks before waking waiters in xlog_state_shutdown_callbacks") changed the order of running callbacks and wait for iclog completion to avoid unmount path untimely destroy AIL. But which seems not enough to ensue this, adding mdelay in `xfs_buf_item_unpin` can prove that. The reproduction is as follows. To ensure destroy AIL safely, we should wait all xlog ioend workers done and sync the AIL. ================================================================== BUG: KASAN: use-after-free in xfs_trans_ail_delete+0x240/0x2a0 Read of size 8 at addr ffff888023169400 by task kworker/1:1H/43 CPU: 1 PID: 43 Comm: kworker/1:1H Tainted: G W 6.1.0-rc1-00002-gc28266863c4a ni#137 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: xfs-log/sda xlog_ioend_work Call Trace: <TASK> dump_stack_lvl+0x4d/0x66 print_report+0x171/0x4a6 kasan_report+0xb3/0x130 xfs_trans_ail_delete+0x240/0x2a0 xfs_buf_item_done+0x7b/0xa0 xfs_buf_ioend+0x1e9/0x11f0 xfs_buf_item_unpin+0x4c8/0x860 xfs_trans_committed_bulk+0x4c2/0x7c0 xlog_cil_committed+0xab6/0xfb0 xlog_cil_process_committed+0x117/0x1e0 xlog_state_shutdown_callbacks+0x208/0x440 xlog_force_shutdown+0x1b3/0x3a0 xlog_ioend_work+0xef/0x1d0 process_one_work+0x6f9/0xf70 worker_thread+0x578/0xf30 kthread+0x28c/0x330 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 9606: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x7a/0x90 __kmalloc+0x59/0x140 kmem_alloc+0xb2/0x2f0 xfs_trans_ail_init+0x20/0x320 xfs_log_mount+0x37e/0x690 xfs_mountfs+0xe36/0x1b40 xfs_fs_fill_super+0xc5c/0x1a70 get_tree_bdev+0x3c5/0x6c0 vfs_get_tree+0x85/0x250 path_mount+0xec3/0x1830 do_mount+0xef/0x110 __x64_sys_mount+0x150/0x1f0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 9662: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 __kasan_slab_free+0x105/0x1a0 __kmem_cache_free+0x99/0x2d0 kvfree+0x3a/0x40 xfs_log_unmount+0x60/0xf0 xfs_unmountfs+0xf3/0x1d0 xfs_fs_put_super+0x78/0x300 generic_shutdown_super+0x151/0x400 kill_block_super+0x9a/0xe0 deactivate_locked_super+0x82/0xe0 deactivate_super+0x91/0xb0 cleanup_mnt+0x32a/0x4a0 task_work_run+0x15f/0x240 exit_to_user_mode_prepare+0x188/0x190 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff888023169400 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 0 bytes inside of 128-byte region [ffff888023169400, ffff888023169480) The buggy address belongs to the physical page: page:ffffea00008c5a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888023168f80 pfn:0x23168 head:ffffea00008c5a00 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 001fffff80010200 ffffea00006b3988 ffffea0000577a88 ffff88800f842ac0 raw: ffff888023168f80 0000000000150007 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888023169300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888023169380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888023169400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888023169480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888023169500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint Fixes: cd6f79d ("xfs: run callbacks before waking waiters in xlog_state_shutdown_callbacks") Signed-off-by: Guo Xuenan <guoxuenan@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
This is a regular stable merge of latest linux-stable tag v6.1.54-rt15.
AB#2484317
No merge conflicts encountered.
Testing
Additional functional and performance testing will be handle by ATSs.
@ni/rtos