update by RanderWang · Pull Request #1 · RanderWang/linux

RanderWang · 2018-06-28T02:29:44Z

No description provided.

@16kHz

When doing successive oversampling settings, it may fail to update filter parameters silently: - First time oversampling is being set, it will be successful, as fl->res is 0 initially. - Next attempts with various oversamp value may return 0 (success), but keep previous filter parameters, due to 'res' never reaches above or equal current 'fl->res'. This is particularly true when setting sampling frequency (that relies on oversamp). Typical failure without error: - run 1st test @16kHz samp freq will succeed - run new test @8khz will succeed as well - run new test @16kHz (again): sample rate will remain 8kHz without error Fixes: e2e6771 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

When channel clk source is set to "CLKOUT_F" or "CLKOUT_R" (e.g. div2), sample rate is currently set to half the requested value. Fixes: eca9498 ("IIO: ADC: add stm32 DFSDM support for PDM microphone") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Currently, we use int for buffer length and bytes_per_datum. However, kfifo uses unsigned int for length and size_t for element size. We need to make sure these matches or we will have bugs related to overflow (in the range between INT_MAX and UINT_MAX for length, for example). In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an int, which would cause bugs for large values of bytes_per_datum. Change buffer length to use unsigned int and bytes_per_datum to use size_t. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Currently, the following causes a kernel OOPS in memcpy: echo 1073741825 > buffer/length echo 1 > buffer/enable Note that using 1073741824 instead of 1073741825 causes "write error: Cannot allocate memory" but no OOPS. This is because 1073741824 == 2^30 and 1073741825 == 2^30+1. Since kfifo rounds up to the nearest power of 2, it will actually call kmalloc with roundup_pow_of_two(length) * bytes_per_datum. Using length == 1073741825 and bytes_per_datum == 2, we get: kmalloc(roundup_pow_of_two(1073741825) * 2 or kmalloc(2147483648 * 2) or kmalloc(4294967296) or kmalloc(UINT_MAX + 1) so this overflows to 0, causing kmalloc to return ZERO_SIZE_PTR and subsequent memcpy to fail once the device is enabled. Fix this by checking for overflow prior to allocating a kfifo. With this check added, the above code returns -EINVAL when enabling the buffer, rather than causing an OOPS. Signed-off-by: Martin Kelly <mkelly@xevo.com> cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

…l channels When iterating through the channels, the index in the array is not the scan index. Added an xlate function to translate to the proper index. The result of the bug is that the channel array is indexed with a wrong index, thus instead of the proper channel, we access invalid memory, which may lead to invalid results and/or corruption. This will be used also for devicetree channel xlate. Fixes: 5e1a1da ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Fixes: 073c662 ("iio: adc: at91-sama5d2_adc: add support for DMA") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

…er resume hid_sensor_set_power_work() powers the sensors back up after a resume based on the user_requested_state atomic_t. But hid_sensor_power_state() treats this as a boolean flag, leading to the following problematic scenario: 1) Some app starts using the iio-sensor in buffered / triggered mode, hid_sensor_data_rdy_trigger_set_state(true) gets called, setting user_requested_state to 1. 2) Something directly accesses a _raw value through sysfs, leading to a call to hid_sensor_power_state(true) followed by hid_sensor_power_state(false) call, this sets user_requested_state to 1 followed by setting it to 0. 3) Suspend/resume the machine, hid_sensor_set_power_work() now does NOT power the sensor back up because user_requested_state (wrongly) is 0. Which stops the app using the sensor in buffered mode from receiving any new values. This commit changes user_requested_state to a counter tracking how many times hid_sensor_power_state(true) was called instead, fixing this. Cc: Bastien Nocera <hadess@hadess.net> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

We need to select the buffer code, otherwise we get build errors with undefined functions on the trigger and buffer, if we select just IIO and then AT91_SAMA5D2_ADC from menuconfig This adds a Kconfig 'select' statement like other ADC drivers have it already. Fixes: 5e1a1da ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

…/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 4.17 cycle. * core - fix up some issues with overflow etc around wrong types for some fo the kfifo handling functions. Seems unlikely this would be triggered in reality but the fixes are simple so let's tidy them up. Second patch deals with checking the userspace value passed for length for potential overflow. * ad7793 - Catch up with changes to the ad_sigma_delta core and use read_raw / write_raw iwth IIO_CHAN_INFO_SAMP_FEW to handle sampling frequency control. * at91-sama5d2 - Channel config for differential channels was completely broken. - Missing Kconfig dependency for buffer support. * hid-sensor - Fix an issue with powering up after resume due to wrong reference counting. * stm32-dfsdm - Fix an issue with second writes of the oversampling settings failing. - Fix an issue with the sample rate being set to half of requested value when particular clock source is used.

@offset

syzbot found a way to trigger an infinitie loop by overflowing @offset variable that has been forced to use u16 for some very obscure reason in the past. We probably want to look at NEXTHDR_FRAGMENT handling which looks wrong, in a separate patch. In net-next, we shall try to use skb_header_pointer() instead of pskb_may_pull(). watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553] Modules linked in: irq event stamp: 13885653 hardirqs last enabled at (13885652): [<ffffffff878009d5>] restore_regs_and_return_to_kernel+0x0/0x2b hardirqs last disabled at (13885653): [<ffffffff87800905>] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625 softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline] softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825 softirqs last disabled at (13614032): [<ffffffff84df1b6f>] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942 CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ #40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101 RSP: 0018:ffff8801d8cfe250 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff8801d88a8080 RBX: ffff8801d7389e40 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffffffff868da4ad RDI: ffff8801c8a53277 RBP: ffff8801d8cfe250 R08: ffff8801d88a8080 R09: ffff8801d8cfe3e8 R10: ffffed003b19fc87 R11: ffff8801d8cfe43f R12: ffff8801c8a5327f R13: 0000000000000000 R14: ffff8801c8a4e5fe R15: ffff8801d8cfe3e8 FS: 0000000000d88940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 00000001acab3000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368 xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline] icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372 icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43 ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305 NF_HOOK include/linux/netfilter.h:288 [inline] ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71 NF_HOOK include/linux/netfilter.h:288 [inline] ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208 __netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711 netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785 napi_frags_finish net/core/dev.c:5226 [inline] napi_gro_frags+0x631/0xc40 net/core/dev.c:5299 tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996 call_write_iter include/linux/fs.h:1784 [inline] do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680 do_iter_write+0x185/0x5f0 fs/read_write.c:959 vfs_writev+0x1c7/0x330 fs/read_write.c:1004 do_writev+0x112/0x2f0 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev fs/read_write.c:1109 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: syzbot+0053c8...@syzkaller.appspotmail.com Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

If the boot ACL entry is already NULL we should not fill in the upper two DWs with 0xfffffffff. Otherwise they are not shown as empty entries when the sysfs attribute is read. Fixes: 9aaa3b8 ("thunderbolt: Add support for preboot ACL") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <yehezkelshb@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Doing faccessat("/afs/some/directory", 0) triggers a BUG in the permissions check code. Fix this by just removing the BUG section. If no permissions are asked for, just return okay if the file exists. Also: (1) Split up the directory check so that it has separate if-statements rather than if-else-if (e.g. checking for MAY_EXEC shouldn't skip the check for MAY_READ and MAY_WRITE). (2) Check for MAY_CHDIR as MAY_EXEC. Without the main fix, the following BUG may occur: kernel BUG at fs/afs/security.c:386! invalid opcode: 0000 [#1] SMP PTI ... RIP: 0010:afs_permission+0x19d/0x1a0 [kafs] ... Call Trace: ? inode_permission+0xbe/0x180 ? do_faccessat+0xdc/0x270 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 00d3b7a ("[AFS]: Add security support.") Reported-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David Howells <dhowells@redhat.com>

In theory the AFS_VLSF_BACKVOL flag for a server in a vldb entry would indicate the presence of a backup volume on that server. In practice however, this flag is never set, and the presence of a backup volume is implied by the entry having AFS_VLF_BACKEXISTS set, for the server that hosts the read-write volume (has AFS_VLSF_RWVOL). Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>

…bj_dump() In the nft_ct_helper_obj_dump(), always priv->helper4 is dereferenced. But if family is ipv6, priv->helper6 should be dereferenced. Steps to reproduces: #test.nft table ip6 filter { ct helper ftp { type "ftp" protocol tcp } chain input { type filter hook input priority 4; ct helper set "ftp" } } %nft -f test.nft %nft list ruleset we can see the below messages: [ 916.286233] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 916.294777] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 916.302613] Modules linked in: nft_objref nf_conntrack_sip nf_conntrack_snmp nf_conntrack_broadcast nf_conntrack_ftp nft_ct nf_conntrack nf_tables nfnetlink [last unloaded: nfnetlink] [ 916.318758] CPU: 1 PID: 2093 Comm: nft Not tainted 4.17.0-rc4+ #181 [ 916.326772] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 916.338773] RIP: 0010:strlen+0x1a/0x90 [ 916.342781] RSP: 0018:ffff88010ff0f2f8 EFLAGS: 00010292 [ 916.346773] RAX: dffffc0000000000 RBX: ffff880119b26ee8 RCX: ffff88010c150038 [ 916.354777] RDX: 0000000000000002 RSI: ffff880119b26ee8 RDI: 0000000000000010 [ 916.362773] RBP: 0000000000000010 R08: 0000000000007e88 R09: ffff88010c15003c [ 916.370773] R10: ffff88010c150037 R11: ffffed002182a007 R12: ffff88010ff04040 [ 916.378779] R13: 0000000000000010 R14: ffff880119b26f30 R15: ffff88010ff04110 [ 916.387265] FS: 00007f57a1997700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000 [ 916.394785] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 916.402778] CR2: 00007f57a0ac80f0 CR3: 000000010ff02000 CR4: 00000000001006e0 [ 916.410772] Call Trace: [ 916.414787] nft_ct_helper_obj_dump+0x94/0x200 [nft_ct] [ 916.418779] ? nft_ct_set_eval+0x560/0x560 [nft_ct] [ 916.426771] ? memset+0x1f/0x40 [ 916.426771] ? __nla_reserve+0x92/0xb0 [ 916.434774] ? memcpy+0x34/0x50 [ 916.434774] nf_tables_fill_obj_info+0x484/0x860 [nf_tables] [ 916.442773] ? __nft_release_basechain+0x600/0x600 [nf_tables] [ 916.450779] ? lock_acquire+0x193/0x380 [ 916.454771] ? lock_acquire+0x193/0x380 [ 916.458789] ? nf_tables_dump_obj+0x148/0xcb0 [nf_tables] [ 916.462777] nf_tables_dump_obj+0x5f0/0xcb0 [nf_tables] [ 916.470769] ? __alloc_skb+0x30b/0x500 [ 916.474779] netlink_dump+0x752/0xb50 [ 916.478775] __netlink_dump_start+0x4d3/0x750 [ 916.482784] nf_tables_getobj+0x27a/0x930 [nf_tables] [ 916.490774] ? nft_obj_notify+0x100/0x100 [nf_tables] [ 916.494772] ? nf_tables_getobj+0x930/0x930 [nf_tables] [ 916.502579] ? nf_tables_dump_flowtable_done+0x70/0x70 [nf_tables] [ 916.506774] ? nft_obj_notify+0x100/0x100 [nf_tables] [ 916.514808] nfnetlink_rcv_msg+0x8ab/0xa86 [nfnetlink] [ 916.518771] ? nfnetlink_rcv_msg+0x550/0xa86 [nfnetlink] [ 916.526782] netlink_rcv_skb+0x23e/0x360 [ 916.530773] ? nfnetlink_bind+0x200/0x200 [nfnetlink] [ 916.534778] ? debug_check_no_locks_freed+0x280/0x280 [ 916.542770] ? netlink_ack+0x870/0x870 [ 916.546786] ? ns_capable_common+0xf4/0x130 [ 916.550765] nfnetlink_rcv+0x172/0x16c0 [nfnetlink] [ 916.554771] ? sched_clock_local+0xe2/0x150 [ 916.558774] ? sched_clock_cpu+0x144/0x180 [ 916.566575] ? lock_acquire+0x380/0x380 [ 916.570775] ? sched_clock_local+0xe2/0x150 [ 916.574765] ? nfnetlink_net_init+0x130/0x130 [nfnetlink] [ 916.578763] ? sched_clock_cpu+0x144/0x180 [ 916.582770] ? lock_acquire+0x193/0x380 [ 916.590771] ? lock_acquire+0x193/0x380 [ 916.594766] ? lock_acquire+0x380/0x380 [ 916.598760] ? netlink_deliver_tap+0x262/0xa60 [ 916.602766] ? lock_acquire+0x193/0x380 [ 916.606766] netlink_unicast+0x3ef/0x5a0 [ 916.610771] ? netlink_attachskb+0x630/0x630 [ 916.614763] netlink_sendmsg+0x72a/0xb00 [ 916.618769] ? netlink_unicast+0x5a0/0x5a0 [ 916.626766] ? _copy_from_user+0x92/0xc0 [ 916.630773] __sys_sendto+0x202/0x300 [ 916.634772] ? __ia32_sys_getpeername+0xb0/0xb0 [ 916.638759] ? lock_acquire+0x380/0x380 [ 916.642769] ? lock_acquire+0x193/0x380 [ 916.646761] ? finish_task_switch+0xf4/0x560 [ 916.650763] ? __schedule+0x582/0x19a0 [ 916.655301] ? __sched_text_start+0x8/0x8 [ 916.655301] ? up_read+0x1c/0x110 [ 916.655301] ? __do_page_fault+0x48b/0xaa0 [ 916.655301] ? entry_SYSCALL_64_after_hwframe+0x59/0xbe [ 916.655301] __x64_sys_sendto+0xdd/0x1b0 [ 916.655301] do_syscall_64+0x96/0x3d0 [ 916.655301] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 916.655301] RIP: 0033:0x7f57a0ff5e03 [ 916.655301] RSP: 002b:00007fff6367e0a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 916.655301] RAX: ffffffffffffffda RBX: 00007fff6367f1e0 RCX: 00007f57a0ff5e03 [ 916.655301] RDX: 0000000000000020 RSI: 00007fff6367e110 RDI: 0000000000000003 [ 916.655301] RBP: 00007fff6367e100 R08: 00007f57a0ce9160 R09: 000000000000000c [ 916.655301] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff6367e110 [ 916.655301] R13: 0000000000000020 R14: 00007f57a153c610 R15: 0000562417258de0 [ 916.655301] Code: ff ff ff 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 fa 53 48 c1 ea 03 48 b8 00 00 00 00 00 fc ff df 48 89 fd 48 83 ec 08 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f [ 916.655301] RIP: strlen+0x1a/0x90 RSP: ffff88010ff0f2f8 [ 916.771929] ---[ end trace 1065e048e72479fe ]--- [ 916.777204] Kernel panic - not syncing: Fatal exception [ 916.778158] Kernel Offset: 0x14000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

strlcpy() can't be safely used on a user-space provided string, as it can try to read beyond the buffer's end, if the latter is not NULL terminated. Leveraging the above, syzbot has been able to trigger the following splat: BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] BUG: KASAN: stack-out-of-bounds in ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] BUG: KASAN: stack-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] BUG: KASAN: stack-out-of-bounds in compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 Write of size 33 at addr ffff8801b0abf888 by task syz-executor0/4504 CPU: 0 PID: 4504 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 compat_do_replace+0x483/0x900 net/bridge/netfilter/ebtables.c:2285 compat_do_ebt_set_ctl+0x2ac/0x324 net/bridge/netfilter/ebtables.c:2367 compat_nf_sockopt net/netfilter/nf_sockopt.c:144 [inline] compat_nf_setsockopt+0x9b/0x140 net/netfilter/nf_sockopt.c:156 compat_ip_setsockopt+0xff/0x140 net/ipv4/ip_sockglue.c:1279 inet_csk_compat_setsockopt+0x97/0x120 net/ipv4/inet_connection_sock.c:1041 compat_tcp_setsockopt+0x49/0x80 net/ipv4/tcp.c:2901 compat_sock_common_setsockopt+0xb4/0x150 net/core/sock.c:3050 __compat_sys_setsockopt+0x1ab/0x7c0 net/compat.c:403 __do_compat_sys_setsockopt net/compat.c:416 [inline] __se_compat_sys_setsockopt net/compat.c:413 [inline] __ia32_compat_sys_setsockopt+0xbd/0x150 net/compat.c:413 do_syscall_32_irqs_on arch/x86/entry/common.c:323 [inline] do_fast_syscall_32+0x345/0xf9b arch/x86/entry/common.c:394 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7fb3cb9 RSP: 002b:00000000fff0c26c EFLAGS: 00000282 ORIG_RAX: 000000000000016e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000080 RSI: 0000000020000300 RDI: 00000000000005f4 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:ffffea0006c2afc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x2fffc0000000000() raw: 02fffc0000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffffea0006c20101 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Fix the issue replacing the unsafe function with strscpy() and taking care of possible errors. Fixes: 81e675c ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-and-tested-by: syzbot+4e42a04e0bc33cb6c087@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

New compilers use the floating-point registers as spill registers when there is high register pressure. In the purgatory however, the afp control bit is not set. This leads to an exception whenever a floating-point instruction is used, which again causes an interrupt loop. Forbid the compiler to use floating-point instructions by adding -msoft-float to KBUILD_CFLAGS. Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Fixes: 840798a (s390/kexec_file: Add purgatory) Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The i2c XLP9xx driver is maintained by Cavium. Add George Cherian and Jan Glauber as the Maintainers. Signed-off-by: George Cherian <george.cherian@cavium.com> Acked-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

…l undefined issue. We can use the generic lib to fix these error because the symbol of libgcc in toolchain is not exported. ERROR: "__ucmpdi2" [fs/xfs/xfs.ko] undefined! ERROR: "__ashrdi3" [fs/xfs/xfs.ko] undefined! ERROR: "__lshrdi3" [fs/xfs/xfs.ko] undefined! ERROR: "__ashldi3" [fs/ntfs/ntfs.ko] undefined! ... Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

To include kernel/Kconfig.freezer to make sure the dependency between CONFIG_CGROUP_FREEZER and CONFIG_FREEZER It will cause building error when I make allmodconfig. kernel/cgroup/freezer.c: In function 'freezer_css_online': kernel/cgroup/freezer.c:116:15: error: 'system_freezing_cnt' undeclared (first use in this function) atomic_inc(&system_freezing_cnt); ^~~~~~~~~~~~~~~~~~~ kernel/cgroup/freezer.c:116:15: note: each undeclared identifier is reported only once for each function it appears in kernel/cgroup/freezer.c: In function 'freezer_css_offline': kernel/cgroup/freezer.c:137:15: error: 'system_freezing_cnt' undeclared (first use in this function) atomic_dec(&system_freezing_cnt); ^~~~~~~~~~~~~~~~~~~ kernel/cgroup/freezer.c: In function 'freezer_attach': kernel/cgroup/freezer.c:181:4: error: implicit declaration of function 'freeze_task' [-Werror=implicit-function-declaration] freeze_task(task); ^~~~~~~~~~~ kernel/cgroup/freezer.c: In function 'freezer_apply_state': kernel/cgroup/freezer.c:360:16: error: 'system_freezing_cnt' undeclared (first use in this function) atomic_inc(&system_freezing_cnt); ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

When I compiled with allmodconfig, it caused this building failed. crypto/xor.c:25:21: fatal error: asm/xor.h: No such file or directory #include <asm/xor.h> ^ compilation terminated. Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

…GE_SHARED It broke the 'allmodconfig' build. drivers/gpu/drm/udl/udl_fb.c: In function 'udl_fb_mmap': drivers/gpu/drm/udl/udl_fb.c:183:52: error: 'PAGE_SHARED' undeclared (first use in this function) if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) ^~~~~~~~~~~ drivers/gpu/drm/udl/udl_fb.c:183:52: note: each undeclared identifier is reported only once for each function it appears in make[4]: *** [drivers/gpu/drm/udl/udl_fb.o] Error 1 Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

…e and flush_kernel_vmap_range It broke the 'allmodconfig' build. fs/xfs/xfs_buf.c: In function 'xfs_buf_bio_end_io': fs/xfs/xfs_buf.c:1242:3: error: implicit declaration of function 'invalidate_kernel_vmap_range' [-Werror=implicit-function-declaration] invalidate_kernel_vmap_range(bp->b_addr, xfs_buf_vmap_len(bp)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ fs/xfs/xfs_buf.c: In function 'xfs_buf_ioapply_map': fs/xfs/xfs_buf.c:1312:4: error: implicit declaration of function 'flush_kernel_vmap_range' [-Werror=implicit-function-declaration] flush_kernel_vmap_range(bp->b_addr, ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

It broke the 'allmodconfig' build. LD vmlinux SYSMAP System.map Building modules, stage 2. MODPOST 5028 modules ERROR: "flush_dcache_page" [net/sunrpc/xprtrdma/rpcrdma.ko] undefined! ERROR: "empty_zero_page" [net/ceph/libceph.ko] undefined! ERROR: "save_stack_trace" [kernel/backtracetest.ko] undefined! ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined! ERROR: "copy_page" [fs/nilfs2/nilfs2.ko] undefined! ... Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

It broke the 'allmodconfig' build. We need to include <linux/types.h> to make sure the type is defined before using it. Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

… trace_hardirqs_off. It broke the 'allmodconfig' build when CONFIG_TRACE_IRQFLAGS is enabled. Signed-off-by: Nick Chun-Ming Hu <nickhu@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

…IAN is default y This way we can build kernel with CONFIG_CPU_LITTLE_ENDIAN=y. Build allmodconfig and allnoconfig are available too. It also fixes the endian mismatch issue because AFLAGS and LDFLAGS is not passed correctly. Signed-off-by: Vincent Ren-Wei Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>

We use tlbop to map virtual address in the first beginning, however it may map too much if DRAM size is not that big. We have to invalidate the mapping when the page table is created. Signed-off-by: Greentime Hu <greentime@andestech.com>

Refine readability of INT_MASK_INITAIAL_VAL with meaningful macro instead of magic number. Signed-off-by: Greentime Hu <greentime@andestech.com>

…lity of NTC The nds32 architecture will use physical memory when interrupt or exception comes and it will use the setting of NTC0-4. The original implementation didn't consider the DRAM start address may start from 1GB, 2GB or 3GB to cause this issue. It will write the data to DRAM if it is running in physical address however kernel will read the data with virtaul address through data cache. In this case, the data of DRAM is latest. This fix will set the correct cacheability to let kernel write/read the latest data in cache instead of DRAM. Signed-off-by: Greentime Hu <greentime@andestech.com>

Change the name of the file '/proc/sys/nds32/unaligned_acess' to '/proc/sys/nds32/unaligned_access' Signed-off-by: Nickhu <nickhu@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>

If the kernel config 'CONFIG_ALIGNMENT_TRAP' and the file '/proc/sys/nds32/unaligned_access/enable' are set, the kernel unaligned access handler does not handle correctly when the value of immediate field is negative. This commit fixes the unaligned access handler in kernel. Signed-off-by: Nickhu <nickhu@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>

BugLink: https://bugs.launchpad.net/bugs/1821607 commit f16eb8a upstream. If SSDT overlay is loaded via ConfigFS and then unloaded the device, we would like to have OF modalias for, already gone. Thus, acpi_get_name() returns no allocated buffer for such case and kernel crashes afterwards: ACPI: Host-directed Dynamic ACPI Table Unload ads7950 spi-PRP0001:00: Dropping the link to regulator.0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 80000000070d6067 P4D 80000000070d6067 PUD 70d0067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 40 Comm: kworker/u4:2 Not tainted 5.0.0+ thesofproject#96 Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:create_of_modalias.isra.1+0x4c/0x150 Code: 00 00 48 89 44 24 18 31 c0 48 8d 54 24 08 48 c7 44 24 10 00 00 00 00 48 c7 44 24 08 ff ff ff ff e8 7a b0 03 00 48 8b 4c 24 10 <0f> b6 01 84 c0 74 27 48 c7 c7 00 09 f4 a5 0f b6 f0 8d 50 20 f6 04 RSP: 0000:ffffa51040297c10 EFLAGS: 00010246 RAX: 0000000000001001 RBX: 0000000000000785 RCX: 0000000000000000 RDX: 0000000000001001 RSI: 0000000000000286 RDI: ffffa2163dc042e0 RBP: ffffa216062b1196 R08: 0000000000001001 R09: ffffa21639873000 R10: ffffffffa606761d R11: 0000000000000001 R12: ffffa21639873218 R13: ffffa2163deb5060 R14: ffffa216063d1010 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa2163e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000007114000 CR4: 00000000001006f0 Call Trace: __acpi_device_uevent_modalias+0xb0/0x100 spi_uevent+0xd/0x40 ... In order to fix above let create_of_modalias() check the status returned by acpi_get_name() and bail out in case of failure. Fixes: 8765c5b ("ACPI / scan: Rework modalias creation when "compatible" is present") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201381 Reported-by: Ferry Toth <fntoth@gmail.com> Tested-by: Ferry Toth<fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 4.1+ <stable@vger.kernel.org> # 4.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1821607 commit 32e36bf upstream. When using SCSI passthrough in combination with the iSCSI target driver then cmd->t_state_lock may be obtained from interrupt context. Hence, all code that obtains cmd->t_state_lock from thread context must disable interrupts first. This patch avoids that lockdep reports the following: WARNING: inconsistent lock state 4.18.0-dbg+ #1 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes: 000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod] {HARDIRQ-ON-W} state was registered at: lock_acquire+0xd2/0x260 _raw_spin_lock+0x32/0x50 iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod] iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod] kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 irq event stamp: 1281 hardirqs last enabled at (1279): [<ffffffff970ade79>] __local_bh_enable_ip+0xa9/0x160 hardirqs last disabled at (1281): [<ffffffff97a008a5>] interrupt_entry+0xb5/0xd0 softirqs last enabled at (1278): [<ffffffff977cd9a1>] lock_sock_nested+0x51/0xc0 softirqs last disabled at (1280): [<ffffffffc07a6e04>] ip6_finish_output2+0x124/0xe40 [ipv6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cmd->t_state_lock)->rlock); <Interrupt> lock(&(&cmd->t_state_lock)->rlock); Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1821607 commit 1cec3f2 upstream. This fixes a longstanding lockdep warning triggered by fstests/btrfs/011. Circular locking dependency check reports warning[1], that's because the btrfs_scrub_dev() calls the stack #0 below with, the fs_info::scrub_lock held. The test case leading to this warning: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /btrfs $ btrfs scrub start -B /btrfs In fact we have fs_info::scrub_workers_refcnt to track if the init and destroy of the scrub workers are needed. So once we have incremented and decremented the fs_info::scrub_workers_refcnt value in the thread, its ok to drop the scrub_lock, and then actually do the btrfs_destroy_workqueue() part. So this patch drops the scrub_lock before calling btrfs_destroy_workqueue(). [359.258534] ====================================================== [359.260305] WARNING: possible circular locking dependency detected [359.261938] 5.0.0-rc6-default thesofproject#461 Not tainted [359.263135] ------------------------------------------------------ [359.264672] btrfs/20975 is trying to acquire lock: [359.265927] 00000000d4d32bea ((wq_completion)"%s-%s""btrfs", name){+.+.}, at: flush_workqueue+0x87/0x540 [359.268416] [359.268416] but task is already holding lock: [359.270061] 0000000053ea26a6 (&fs_info->scrub_lock){+.+.}, at: btrfs_scrub_dev+0x322/0x590 [btrfs] [359.272418] [359.272418] which lock already depends on the new lock. [359.272418] [359.274692] [359.274692] the existing dependency chain (in reverse order) is: [359.276671] [359.276671] -> thesofproject#3 (&fs_info->scrub_lock){+.+.}: [359.278187] __mutex_lock+0x86/0x9c0 [359.279086] btrfs_scrub_pause+0x31/0x100 [btrfs] [359.280421] btrfs_commit_transaction+0x1e4/0x9e0 [btrfs] [359.281931] close_ctree+0x30b/0x350 [btrfs] [359.283208] generic_shutdown_super+0x64/0x100 [359.284516] kill_anon_super+0x14/0x30 [359.285658] btrfs_kill_super+0x12/0xa0 [btrfs] [359.286964] deactivate_locked_super+0x29/0x60 [359.288242] cleanup_mnt+0x3b/0x70 [359.289310] task_work_run+0x98/0xc0 [359.290428] exit_to_usermode_loop+0x83/0x90 [359.291445] do_syscall_64+0x15b/0x180 [359.292598] entry_SYSCALL_64_after_hwframe+0x49/0xbe [359.294011] [359.294011] -> thesofproject#2 (sb_internal#2){.+.+}: [359.295432] __sb_start_write+0x113/0x1d0 [359.296394] start_transaction+0x369/0x500 [btrfs] [359.297471] btrfs_finish_ordered_io+0x2aa/0x7c0 [btrfs] [359.298629] normal_work_helper+0xcd/0x530 [btrfs] [359.299698] process_one_work+0x246/0x610 [359.300898] worker_thread+0x3c/0x390 [359.302020] kthread+0x116/0x130 [359.303053] ret_from_fork+0x24/0x30 [359.304152] [359.304152] -> #1 ((work_completion)(&work->normal_work)){+.+.}: [359.306100] process_one_work+0x21f/0x610 [359.307302] worker_thread+0x3c/0x390 [359.308465] kthread+0x116/0x130 [359.309357] ret_from_fork+0x24/0x30 [359.310229] [359.310229] -> #0 ((wq_completion)"%s-%s""btrfs", name){+.+.}: [359.311812] lock_acquire+0x90/0x180 [359.312929] flush_workqueue+0xaa/0x540 [359.313845] drain_workqueue+0xa1/0x180 [359.314761] destroy_workqueue+0x17/0x240 [359.315754] btrfs_destroy_workqueue+0x57/0x200 [btrfs] [359.317245] scrub_workers_put+0x2c/0x60 [btrfs] [359.318585] btrfs_scrub_dev+0x336/0x590 [btrfs] [359.319944] btrfs_dev_replace_by_ioctl.cold.19+0x179/0x1bb [btrfs] [359.321622] btrfs_ioctl+0x28a4/0x2e40 [btrfs] [359.322908] do_vfs_ioctl+0xa2/0x6d0 [359.324021] ksys_ioctl+0x3a/0x70 [359.325066] __x64_sys_ioctl+0x16/0x20 [359.326236] do_syscall_64+0x54/0x180 [359.327379] entry_SYSCALL_64_after_hwframe+0x49/0xbe [359.328772] [359.328772] other info that might help us debug this: [359.328772] [359.330990] Chain exists of: [359.330990] (wq_completion)"%s-%s""btrfs", name --> sb_internal#2 --> &fs_info->scrub_lock [359.330990] [359.334376] Possible unsafe locking scenario: [359.334376] [359.336020] CPU0 CPU1 [359.337070] ---- ---- [359.337821] lock(&fs_info->scrub_lock); [359.338506] lock(sb_internal#2); [359.339506] lock(&fs_info->scrub_lock); [359.341461] lock((wq_completion)"%s-%s""btrfs", name); [359.342437] [359.342437] *** DEADLOCK *** [359.342437] [359.343745] 1 lock held by btrfs/20975: [359.344788] #0: 0000000053ea26a6 (&fs_info->scrub_lock){+.+.}, at: btrfs_scrub_dev+0x322/0x590 [btrfs] [359.346778] [359.346778] stack backtrace: [359.347897] CPU: 0 PID: 20975 Comm: btrfs Not tainted 5.0.0-rc6-default thesofproject#461 [359.348983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [359.350501] Call Trace: [359.350931] dump_stack+0x67/0x90 [359.351676] print_circular_bug.isra.37.cold.56+0x15c/0x195 [359.353569] check_prev_add.constprop.44+0x4f9/0x750 [359.354849] ? check_prev_add.constprop.44+0x286/0x750 [359.356505] __lock_acquire+0xb84/0xf10 [359.357505] lock_acquire+0x90/0x180 [359.358271] ? flush_workqueue+0x87/0x540 [359.359098] flush_workqueue+0xaa/0x540 [359.359912] ? flush_workqueue+0x87/0x540 [359.360740] ? drain_workqueue+0x1e/0x180 [359.361565] ? drain_workqueue+0xa1/0x180 [359.362391] drain_workqueue+0xa1/0x180 [359.363193] destroy_workqueue+0x17/0x240 [359.364539] btrfs_destroy_workqueue+0x57/0x200 [btrfs] [359.365673] scrub_workers_put+0x2c/0x60 [btrfs] [359.366618] btrfs_scrub_dev+0x336/0x590 [btrfs] [359.367594] ? start_transaction+0xa1/0x500 [btrfs] [359.368679] btrfs_dev_replace_by_ioctl.cold.19+0x179/0x1bb [btrfs] [359.369545] btrfs_ioctl+0x28a4/0x2e40 [btrfs] [359.370186] ? __lock_acquire+0x263/0xf10 [359.370777] ? kvm_clock_read+0x14/0x30 [359.371392] ? kvm_sched_clock_read+0x5/0x10 [359.372248] ? sched_clock+0x5/0x10 [359.372786] ? sched_clock_cpu+0xc/0xc0 [359.373662] ? do_vfs_ioctl+0xa2/0x6d0 [359.374552] do_vfs_ioctl+0xa2/0x6d0 [359.375378] ? do_sigaction+0xff/0x250 [359.376233] ksys_ioctl+0x3a/0x70 [359.376954] __x64_sys_ioctl+0x16/0x20 [359.377772] do_syscall_64+0x54/0x180 [359.378841] entry_SYSCALL_64_after_hwframe+0x49/0xbe [359.380422] RIP: 0033:0x7f5429296a97 Backporting to older kernels: scrub_nocow_workers must be freed the same way as the others. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Anand Jain <anand.jain@oracle.com> [ update changelog ] Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1821607 commit bc5add0 upstream. When disabling and removing a receive context, it is possible for an asynchronous event (i.e IRQ) to occur. Because of this, there is a race between cleaning up the context, and the context being used by the asynchronous event. cpu 0 (context cleanup) rc->ref_count-- (ref_count == 0) hfi1_rcd_free() cpu 1 (IRQ (with rcd index)) rcd_get_by_index() lock ref_count+++ <-- reference count race (WARNING) return rcd unlock cpu 0 hfi1_free_ctxtdata() <-- incorrect free location lock remove rcd from array unlock free rcd This race will cause the following WARNING trace: WARNING: CPU: 0 PID: 175027 at include/linux/kref.h:52 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1] CPU: 0 PID: 175027 Comm: IMB-MPI1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1 Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015 Call Trace: dump_stack+0x19/0x1b __warn+0xd8/0x100 warn_slowpath_null+0x1d/0x20 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1] is_rcv_urgent_int+0x24/0x90 [hfi1] general_interrupt+0x1b6/0x210 [hfi1] __handle_irq_event_percpu+0x44/0x1c0 handle_irq_event_percpu+0x32/0x80 handle_irq_event+0x3c/0x60 handle_edge_irq+0x7f/0x150 handle_irq+0xe4/0x1a0 do_IRQ+0x4d/0xf0 common_interrupt+0x162/0x162 The race can also lead to a use after free which could be similar to: general protection fault: 0000 1 SMP CPU: 71 PID: 177147 Comm: IMB-MPI1 Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1 Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015 task: ffff9962a8098000 ti: ffff99717a508000 task.ti: ffff99717a508000 __kmalloc+0x94/0x230 Call Trace: ? hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1] hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1] hfi1_aio_write+0xba/0x110 [hfi1] do_sync_readv_writev+0x7b/0xd0 do_readv_writev+0xce/0x260 ? handle_mm_fault+0x39d/0x9b0 ? pick_next_task_fair+0x5f/0x1b0 ? sched_clock_cpu+0x85/0xc0 ? __schedule+0x13a/0x890 vfs_writev+0x35/0x60 SyS_writev+0x7f/0x110 system_call_fastpath+0x22/0x27 Use the appropriate kref API to verify access. Reorder context cleanup to ensure context removal before cleanup occurs correctly. Cc: stable@vger.kernel.org # v4.14.0+ Fixes: f683c80 ("IB/hfi1: Resolve kernel panics by reference counting receive contexts") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

…override BugLink: https://bugs.launchpad.net/bugs/1821607 commit 785c9f4 upstream. Platform driver driver_override field should not be initialized from const memory because the core later kfree() it. If driver_override is manually set later through sysfs, kfree() of old value leads to: $ echo "new_value" > /sys/bus/platform/drivers/.../driver_override kernel BUG at ../mm/slub.c:3960! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... (kfree) from [<c058e8c0>] (platform_set_driver_override+0x84/0xac) (platform_set_driver_override) from [<c058e908>] (driver_override_store+0x20/0x34) (driver_override_store) from [<c031f778>] (kernfs_fop_write+0x100/0x1dc) (kernfs_fop_write) from [<c0296de8>] (__vfs_write+0x2c/0x17c) (__vfs_write) from [<c02970c4>] (vfs_write+0xa4/0x188) (vfs_write) from [<c02972e8>] (ksys_write+0x4c/0xac) (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) The clk-exynos5-subcmu driver uses override only for the purpose of creating meaningful names for children devices (matching names of power domains, e.g. DISP, MFC). The driver_override was not developed for this purpose so just switch to default names of devices to fix the issue. Fixes: b06a532 ("clk: samsung: Add Exynos5 sub-CMU clock driver") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1821607 commit 401e7e8 upstream. When we excute the following commands, we got oops rmmod ipmi_si cat /proc/ioports [ 1623.482380] Unable to handle kernel paging request at virtual address ffff00000901d478 [ 1623.482382] Mem abort info: [ 1623.482383] ESR = 0x96000007 [ 1623.482385] Exception class = DABT (current EL), IL = 32 bits [ 1623.482386] SET = 0, FnV = 0 [ 1623.482387] EA = 0, S1PTW = 0 [ 1623.482388] Data abort info: [ 1623.482389] ISV = 0, ISS = 0x00000007 [ 1623.482390] CM = 0, WnR = 0 [ 1623.482393] swapper pgtable: 4k pages, 48-bit VAs, pgdp = 00000000d7d94a66 [ 1623.482395] [ffff00000901d478] pgd=000000dffbfff003, pud=000000dffbffe003, pmd=0000003f5d06e003, pte=0000000000000000 [ 1623.482399] Internal error: Oops: 96000007 [#1] SMP [ 1623.487407] Modules linked in: ipmi_si(E) nls_utf8 isofs rpcrdma ib_iser ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_umad rdma_cm ib_cm dm_mirror dm_region_hash dm_log iw_cm dm_mod aes_ce_blk crypto_simd cryptd aes_ce_cipher ses ghash_ce sha2_ce enclosure sha256_arm64 sg sha1_ce hisi_sas_v2_hw hibmc_drm sbsa_gwdt hisi_sas_main ip_tables mlx5_ib ib_uverbs marvell ib_core mlx5_core ixgbe mdio hns_dsaf ipmi_devintf hns_enet_drv ipmi_msghandler hns_mdio [last unloaded: ipmi_si] [ 1623.532410] CPU: 30 PID: 11438 Comm: cat Kdump: loaded Tainted: G E 5.0.0-rc3+ thesofproject#168 [ 1623.541498] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.37 11/21/2017 [ 1623.548822] pstate: a0000005 (NzCv daif -PAN -UAO) [ 1623.553684] pc : string+0x28/0x98 [ 1623.557040] lr : vsnprintf+0x368/0x5e8 [ 1623.560837] sp : ffff000013213a80 [ 1623.564191] x29: ffff000013213a80 x28: ffff00001138abb5 [ 1623.569577] x27: ffff000013213c18 x26: ffff805f67d06049 [ 1623.574963] x25: 0000000000000000 x24: ffff00001138abb5 [ 1623.580349] x23: 0000000000000fb7 x22: ffff0000117ed000 [ 1623.585734] x21: ffff000011188fd8 x20: ffff805f67d07000 [ 1623.591119] x19: ffff805f67d06061 x18: ffffffffffffffff [ 1623.596505] x17: 0000000000000200 x16: 0000000000000000 [ 1623.601890] x15: ffff0000117ed748 x14: ffff805f67d07000 [ 1623.607276] x13: ffff805f67d0605e x12: 0000000000000000 [ 1623.612661] x11: 0000000000000000 x10: 0000000000000000 [ 1623.618046] x9 : 0000000000000000 x8 : 000000000000000f [ 1623.623432] x7 : ffff805f67d06061 x6 : fffffffffffffffe [ 1623.628817] x5 : 0000000000000012 x4 : ffff00000901d478 [ 1623.634203] x3 : ffff0a00ffffff04 x2 : ffff805f67d07000 [ 1623.639588] x1 : ffff805f67d07000 x0 : ffffffffffffffff [ 1623.644974] Process cat (pid: 11438, stack limit = 0x000000008d4cbc10) [ 1623.651592] Call trace: [ 1623.654068] string+0x28/0x98 [ 1623.657071] vsnprintf+0x368/0x5e8 [ 1623.660517] seq_vprintf+0x70/0x98 [ 1623.668009] seq_printf+0x7c/0xa0 [ 1623.675530] r_show+0xc8/0xf8 [ 1623.682558] seq_read+0x330/0x440 [ 1623.689877] proc_reg_read+0x78/0xd0 [ 1623.697346] __vfs_read+0x60/0x1a0 [ 1623.704564] vfs_read+0x94/0x150 [ 1623.711339] ksys_read+0x6c/0xd8 [ 1623.717939] __arm64_sys_read+0x24/0x30 [ 1623.725077] el0_svc_common+0x120/0x148 [ 1623.732035] el0_svc_handler+0x30/0x40 [ 1623.738757] el0_svc+0x8/0xc [ 1623.744520] Code: d1000406 aa0103e2 54000149 b4000080 (39400085) [ 1623.753441] ---[ end trace f91b6a4937de9835 ]--- [ 1623.760871] Kernel panic - not syncing: Fatal exception [ 1623.768935] SMP: stopping secondary CPUs [ 1623.775718] Kernel Offset: disabled [ 1623.781998] CPU features: 0x002,21006008 [ 1623.788777] Memory Limit: none [ 1623.798329] Starting crashdump kernel... [ 1623.805202] Bye! If io_setup is called successful in try_smi_init() but try_smi_init() goes out_err before calling ipmi_register_smi(), so ipmi_unregister_smi() will not be called while removing module. It leads to the resource that allocated in io_setup() can not be freed, but the name(DEVICE_NAME) of resource is freed while removing the module. It causes use-after-free when cat /proc/ioports. Fix this by calling io_cleanup() while try_smi_init() goes to out_err. and don't call io_cleanup() until io_setup() returns successful to avoid warning prints. Fixes: 93c303d ("ipmi_si: Clean up shutdown a bit") Cc: stable@vger.kernel.org Reported-by: NuoHan Qiao <qiaonuohan@huawei.com> Suggested-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1821607 commit 78de14c upstream. If fbdev setup has failed, lastclose will give a NULL pointer deref: [ 77.794295] [drm:drm_lastclose] [ 77.794414] [drm:drm_lastclose] driver lastclose completed [ 77.794660] Unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 77.809460] pgd = b376b71b [ 77.818275] [00000014] *pgd=175ba831, *pte=00000000, *ppte=00000000 [ 77.830813] Internal error: Oops: 17 [#1] ARM [ 77.840963] Modules linked in: mi0283qt mipi_dbi tinydrm raspberrypi_hwmon gpio_backlight backlight snd_bcm2835(C) bcm2835_rng rng_core [ 77.865203] CPU: 0 PID: 527 Comm: lt-modetest Tainted: G C 5.0.0-rc1+ #1 [ 77.879525] Hardware name: BCM2835 [ 77.889185] PC is at restore_fbdev_mode+0x20/0x164 [ 77.900261] LR is at drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c [ 78.002446] Process lt-modetest (pid: 527, stack limit = 0x7a3d5c14) [ 78.291030] Backtrace: [ 78.300815] [<c04f2d0c>] (restore_fbdev_mode) from [<c04f4708>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c) [ 78.319095] r9:d8a8a288 r8:d891acf0 r7:d7697910 r6:00000000 r5:d891ac00 r4:d891ac00 [ 78.334432] [<c04f46b4>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c04f47e8>] (drm_fbdev_client_restore+0x18/0x20) [ 78.353296] r8:d76978c0 r7:d7697910 r6:d7697950 r5:d7697800 r4:d891ac00 r3:c04f47d0 [ 78.368689] [<c04f47d0>] (drm_fbdev_client_restore) from [<c051b6b4>] (drm_client_dev_restore+0x7c/0xc0) [ 78.385982] [<c051b638>] (drm_client_dev_restore) from [<c04f8fd0>] (drm_lastclose+0xc4/0xd4) [ 78.402332] r8:d76978c0 r7:d7471080 r6:c0e0c088 r5:d8a85e00 r4:d7697800 [ 78.416688] [<c04f8f0c>] (drm_lastclose) from [<c04f9088>] (drm_release+0xa8/0x10c) [ 78.431929] r5:d8a85e00 r4:d7697800 [ 78.442989] [<c04f8fe0>] (drm_release) from [<c02640c4>] (__fput+0x104/0x1c8) [ 78.457740] r8:d5ccea10 r7:d96cfb10 r6:00000008 r5:d74c1b90 r4:d8a8a280 [ 78.472043] [<c0263fc0>] (__fput) from [<c02641ec>] (____fput+0x18/0x1c) [ 78.486363] r10:00000006 r9:d7722000 r8:c01011c4 r7:00000000 r6:c0ebac6c r5:d892a340 [ 78.501869] r4:d8a8a280 [ 78.512002] [<c02641d4>] (____fput) from [<c013ef1c>] (task_work_run+0x98/0xac) [ 78.527186] [<c013ee84>] (task_work_run) from [<c010cc54>] (do_work_pending+0x4f8/0x570) [ 78.543238] r7:d7722030 r6:00000004 r5:d7723fb0 r4:00000000 [ 78.556825] [<c010c75c>] (do_work_pending) from [<c0101034>] (slow_work_pending+0xc/0x20) [ 78.674256] ---[ end trace 70d3a60cf739be3b ]--- Fix by using drm_fb_helper_lastclose() which checks if fbdev is in use. Fixes: 9060d7f ("drm/fb-helper: Finish the generic fbdev emulation") Cc: stable@vger.kernel.org Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190125150300.33268-1-noralf@tronnes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

if secmark rules fail to unpack a double free happens resulting in the following oops [ 1295.584074] audit: type=1400 audit(1549970525.256:51): apparmor="STATUS" info="failed to unpack profile secmark rules" error=-71 profile="unconfined" name="/root/test" pid=29882 comm="apparmor_parser" name="/root/test" offset=120 [ 1374.042334] ------------[ cut here ]------------ [ 1374.042336] kernel BUG at mm/slub.c:294! [ 1374.042404] invalid opcode: 0000 [#1] SMP PTI [ 1374.042436] CPU: 0 PID: 29921 Comm: apparmor_parser Not tainted 4.20.7-042007-generic #201902061234 [ 1374.042461] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 1374.042489] RIP: 0010:kfree+0x164/0x180 [ 1374.042502] Code: 74 05 41 0f b6 72 51 4c 89 d7 e8 37 cd f8 ff eb 8b 41 b8 01 00 00 00 48 89 d9 48 89 da 4c 89 d6 e8 11 f6 ff ff e9 72 ff ff ff <0f> 0b 49 8b 42 08 a8 01 75 c2 0f 0b 48 8b 3d a9 f4 19 01 e9 c5 fe [ 1374.042552] RSP: 0018:ffffaf7b812d7b90 EFLAGS: 00010246 [ 1374.042568] RAX: ffff91e437679200 RBX: ffff91e437679200 RCX: ffff91e437679200 [ 1374.042589] RDX: 00000000000088b6 RSI: ffff91e43da27060 RDI: ffff91e43d401a80 [ 1374.042609] RBP: ffffaf7b812d7ba8 R08: 0000000000027080 R09: ffffffffa6627a6d [ 1374.042629] R10: ffffd3af41dd9e40 R11: ffff91e43a1740dc R12: ffff91e3f52e8000 [ 1374.042650] R13: ffffffffa6627a6d R14: ffffffffffffffb9 R15: 0000000000000001 [ 1374.042675] FS: 00007f928df77740(0000) GS:ffff91e43da00000(0000) knlGS:0000000000000000 [ 1374.042697] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1374.042714] CR2: 000055a0c3ab6b50 CR3: 0000000079ed8004 CR4: 0000000000360ef0 [ 1374.042737] Call Trace: [ 1374.042750] kzfree+0x2d/0x40 [ 1374.042763] aa_free_profile+0x12b/0x270 [ 1374.042776] unpack_profile+0xc1/0xf10 [ 1374.042790] aa_unpack+0x115/0x4e0 [ 1374.042802] aa_replace_profiles+0x8e/0xcc0 [ 1374.042817] ? kvmalloc_node+0x6d/0x80 [ 1374.042831] ? __check_object_size+0x166/0x192 [ 1374.042845] policy_update+0xcf/0x1b0 [ 1374.042858] profile_load+0x7d/0xa0 [ 1374.042871] __vfs_write+0x3a/0x190 [ 1374.042883] ? apparmor_file_permission+0x1a/0x20 [ 1374.042899] ? security_file_permission+0x31/0xc0 [ 1374.042918] ? _cond_resched+0x19/0x30 [ 1374.042931] vfs_write+0xab/0x1b0 [ 1374.042963] ksys_write+0x55/0xc0 [ 1374.043004] __x64_sys_write+0x1a/0x20 [ 1374.043046] do_syscall_64+0x5a/0x110 [ 1374.043087] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 9caafbe ("apparmor: Parse secmark policy") (cherry picked from commit d8dbb58) Reported-by: Alex Murray <alex.murray@canonical.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

Buglink: https://bugs.launchpad.net/bugs/1812845 Parity page is incorrectly unmapped in finish_parity_scrub(), triggering a reference counter bug on i386, i.e.: [ 157.662401] kernel BUG at mm/highmem.c:349! [ 157.666725] invalid opcode: 0000 [#1] SMP PTI The reason is that kunmap(p_page) was completely left out, so we never did an unmap for the p_page and the loop unmapping the rbio page was iterating over the wrong number of stripes: unmapping should be done with nr_data instead of rbio->real_stripes. Test case to reproduce the bug: - create a raid5 btrfs filesystem: # mkfs.btrfs -m raid5 -d raid5 /dev/sdb /dev/sdc /dev/sdd /dev/sde - mount it: # mount /dev/sdb /mnt - run btrfs scrub in a loop: # while :; do btrfs scrub start -BR /mnt; done BugLink: https://bugs.launchpad.net/bugs/1812845 Fixes: 5a6ac9e ("Btrfs, raid56: support parity scrub on raid56") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> (cherry picked from commit 3897b6f) Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1822671 commit 2b77158 upstream. This reverts commit b189e75. Unable to handle kernel paging request at virtual address c8358000 pgd = efa405c3 [c8358000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT ARM CPU: 0 PID: 711 Comm: kworker/0:2 Not tainted 4.20.0+ thesofproject#30 Hardware name: Freescale i.MX27 (Device Tree Support) Workqueue: events mxcmci_datawork PC is at mxcmci_datawork+0xbc/0x2ac LR is at mxcmci_datawork+0xac/0x2ac pc : [<c04e33c8>] lr : [<c04e33b8>] psr: 60000013 sp : c6c93f08 ip : 24004180 fp : 00000008 r10: c8358000 r9 : c78b3e24 r8 : c6c92000 r7 : 00000000 r6 : c7bb8680 r5 : c7bb86d4 r4 : c78b3de0 r3 : 00002502 r2 : c090b2e0 r1 : 00000880 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a68a8000 DAC: 00000055 Process kworker/0:2 (pid: 711, stack limit = 0x389543bc) Stack: (0xc6c93f08 to 0xc6c94000) 3f00: c7bb86d4 00000000 00000000 c6cbfde0 c7bb86d4 c7ee4200 3f20: 00000000 c0907ea8 00000000 c7bb86d8 c0907ea8 c012077c c6cbfde0 c7bb86d4 3f40: c6cbfde0 c6c92000 c6cbfdf4 c09280ba c0907ea8 c090b2e0 c0907ebc c0120c18 3f60: c6cbfde0 00000000 00000000 c6cbb580 c7ba7c40 c7837edc c6cbb598 00000000 3f80: c6cbfde0 c01208f8 00000000 c01254fc c7ba7c40 c0125400 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010d0 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c04e33c8>] (mxcmci_datawork) from [<c012077c>] (process_one_work+0x1f0/0x338) [<c012077c>] (process_one_work) from [<c0120c18>] (worker_thread+0x320/0x474) [<c0120c18>] (worker_thread) from [<c01254fc>] (kthread+0xfc/0x118) [<c01254fc>] (kthread) from [<c01010d0>] (ret_from_fork+0x14/0x24) Exception stack(0xc6c93fb0 to 0xc6c93ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3500000 1a000059 e5153050 e5933038 (e48a3004) ---[ end trace 54ca629b75f0e737 ]--- note: kworker/0:2[711] exited with preempt_count 1 Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Fixes: b189e75 ("mmc: mxcmmc: handle highmem pages") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1822671 commit 4e50ce0 upstream. Take into account that sg->offset can be bigger than PAGE_SIZE when setting segment sg->dma_address. Otherwise sg->dma_address will point at diffrent page, what makes DMA not possible with erros like this: xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa70c0 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7040 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7080 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7100 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7000 flags=0x0020] Additinally with wrong sg->dma_address unmap_sg will free wrong pages, what what can cause crashes like this: Feb 28 19:27:45 kernel: BUG: Bad page state in process cinnamon pfn:39e8b1 Feb 28 19:27:45 kernel: Disabling lock debugging due to kernel taint Feb 28 19:27:45 kernel: flags: 0x2ffff0000000000() Feb 28 19:27:45 kernel: raw: 02ffff0000000000 0000000000000000 ffffffff00000301 0000000000000000 Feb 28 19:27:45 kernel: raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 Feb 28 19:27:45 kernel: page dumped because: nonzero _refcount Feb 28 19:27:45 kernel: Modules linked in: ccm fuse arc4 nct6775 hwmon_vid amdgpu nls_iso8859_1 nls_cp437 edac_mce_amd vfat fat kvm_amd ccp rng_core kvm mt76x0u mt76x0_common mt76x02_usb irqbypass mt76_usb mt76x02_lib mt76 crct10dif_pclmul crc32_pclmul chash mac80211 amd_iommu_v2 ghash_clmulni_intel gpu_sched i2c_algo_bit ttm wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic drm_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_codec aesni_intel snd_hda_core snd_hwdep aes_x86_64 crypto_simd snd_pcm cfg80211 cryptd mousedev snd_timer glue_helper pcspkr r8169 input_leds realtek agpgart libphy rfkill snd syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore sp5100_tco k10temp i2c_piix4 wmi evdev gpio_amdpt pinctrl_amd mac_hid pcc_cpufreq acpi_cpufreq sg ip_tables x_tables ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) hid_generic(E) usbhid(E) hid(E) dm_mod(E) serio_raw(E) atkbd(E) libps2(E) crc32c_intel(E) ahci(E) libahci(E) libata(E) xhci_pci(E) xhci_hcd(E) Feb 28 19:27:45 kernel: scsi_mod(E) i8042(E) serio(E) bcache(E) crc64(E) Feb 28 19:27:45 kernel: CPU: 2 PID: 896 Comm: cinnamon Tainted: G B W E 4.20.12-arch1-1-custom #1 Feb 28 19:27:45 kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450M Pro4, BIOS P1.20 06/26/2018 Feb 28 19:27:45 kernel: Call Trace: Feb 28 19:27:45 kernel: dump_stack+0x5c/0x80 Feb 28 19:27:45 kernel: bad_page.cold.29+0x7f/0xb2 Feb 28 19:27:45 kernel: __free_pages_ok+0x2c0/0x2d0 Feb 28 19:27:45 kernel: skb_release_data+0x96/0x180 Feb 28 19:27:45 kernel: __kfree_skb+0xe/0x20 Feb 28 19:27:45 kernel: tcp_recvmsg+0x894/0xc60 Feb 28 19:27:45 kernel: ? reuse_swap_page+0x120/0x340 Feb 28 19:27:45 kernel: ? ptep_set_access_flags+0x23/0x30 Feb 28 19:27:45 kernel: inet_recvmsg+0x5b/0x100 Feb 28 19:27:45 kernel: __sys_recvfrom+0xc3/0x180 Feb 28 19:27:45 kernel: ? handle_mm_fault+0x10a/0x250 Feb 28 19:27:45 kernel: ? syscall_trace_enter+0x1d3/0x2d0 Feb 28 19:27:45 kernel: ? __audit_syscall_exit+0x22a/0x290 Feb 28 19:27:45 kernel: __x64_sys_recvfrom+0x24/0x30 Feb 28 19:27:45 kernel: do_syscall_64+0x5b/0x170 Feb 28 19:27:45 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: stable@vger.kernel.org Reported-and-tested-by: Jan Viktorin <jan.viktorin@gmail.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Fixes: 80187fd ('iommu/amd: Optimize map_sg and unmap_sg') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1822671 commit 17605af upstream. Since scsi_device_quiesce() skips SCSI devices that have another state than RUNNING, OFFLINE or TRANSPORT_OFFLINE, scsi_device_resume() should not complain about SCSI devices that have been skipped. Hence this patch. This patch avoids that the following warning appears during resume: WARNING: CPU: 3 PID: 1039 at blk_clear_pm_only+0x2a/0x30 CPU: 3 PID: 1039 Comm: kworker/u8:49 Not tainted 5.0.0+ #1 Hardware name: LENOVO 4180F42/4180F42, BIOS 83ET75WW (1.45 ) 05/10/2013 Workqueue: events_unbound async_run_entry_fn RIP: 0010:blk_clear_pm_only+0x2a/0x30 Call Trace: ? scsi_device_resume+0x28/0x50 ? scsi_dev_type_resume+0x2b/0x80 ? async_run_entry_fn+0x2c/0xd0 ? process_one_work+0x1f0/0x3f0 ? worker_thread+0x28/0x3c0 ? process_one_work+0x3f0/0x3f0 ? kthread+0x10c/0x130 ? __kthread_create_on_node+0x150/0x150 ? ret_from_fork+0x1f/0x30 Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin Steigerwald <martin@lichtvoll.de> Cc: <stable@vger.kernel.org> Reported-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Tested-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Fixes: 3a0a529 ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1822671 commit fa30dde upstream. We see the following NULL pointer dereference while running xfstests generic/475: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 8000000c84bad067 P4D 8000000c84bad067 PUD c84e62067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 9886 Comm: fsstress Kdump: loaded Not tainted 5.0.0-rc8 thesofproject#10 RIP: 0010:ext4_do_update_inode+0x4ec/0x760 ... Call Trace: ? jbd2_journal_get_write_access+0x42/0x50 ? __ext4_journal_get_write_access+0x2c/0x70 ? ext4_truncate+0x186/0x3f0 ext4_mark_iloc_dirty+0x61/0x80 ext4_mark_inode_dirty+0x62/0x1b0 ext4_truncate+0x186/0x3f0 ? unmap_mapping_pages+0x56/0x100 ext4_setattr+0x817/0x8b0 notify_change+0x1df/0x430 do_truncate+0x5e/0x90 ? generic_permission+0x12b/0x1a0 This is triggered because the NULL pointer handle->h_transaction was dereferenced in function ext4_update_inode_fsync_trans(). I found that the h_transaction was set to NULL in jbd2__journal_restart but failed to attached to a new transaction while the journal is aborted. Fix this by checking the handle before updating the inode. Fixes: b436b9b ("ext4: Wait for proper transaction commit on fsync") Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1822671 commit 4843298 upstream. Thread A Thread B - __fput - f2fs_release_file - drop_inmem_pages - mutex_lock(&fi->inmem_lock) - __revoke_inmem_pages - lock_page(page) - open - f2fs_setattr - truncate_setsize - truncate_inode_pages_range - lock_page(page) - truncate_cleanup_page - f2fs_invalidate_page - drop_inmem_page - mutex_lock(&fi->inmem_lock); We may encounter above ABBA deadlock as reported by Kyungtae Kim: I'm reporting a bug in linux-4.17.19: "INFO: task hung in drop_inmem_page" (no reproducer) I think this might be somehow related to the following: https://groups.google.com/forum/#!searchin/syzkaller-bugs/INFO$3A$20task$20hung$20in$20%7Csort:date/syzkaller-bugs/c6soBTrdaIo/AjAzPeIzCgAJ ========================================= INFO: task syz-executor7:10822 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D27024 10822 6346 0x00000004 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 schedule_preempt_disabled+0x18/0x30 kernel/sched/core.c:3617 __mutex_lock_common kernel/locking/mutex.c:833 [inline] __mutex_lock+0x5bd/0x1410 kernel/locking/mutex.c:893 mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:908 drop_inmem_page+0xcb/0x810 fs/f2fs/segment.c:327 f2fs_invalidate_page+0x337/0x5e0 fs/f2fs/data.c:2401 do_invalidatepage mm/truncate.c:165 [inline] truncate_cleanup_page+0x261/0x330 mm/truncate.c:187 truncate_inode_pages_range+0x552/0x1610 mm/truncate.c:367 truncate_inode_pages mm/truncate.c:478 [inline] truncate_pagecache+0x6d/0x90 mm/truncate.c:801 truncate_setsize+0x81/0xa0 mm/truncate.c:826 f2fs_setattr+0x44f/0x1270 fs/f2fs/file.c:781 notify_change+0xa62/0xe80 fs/attr.c:313 do_truncate+0x12e/0x1e0 fs/open.c:63 do_last fs/namei.c:2955 [inline] path_openat+0x2042/0x29f0 fs/namei.c:3505 do_filp_open+0x1bd/0x2c0 fs/namei.c:3540 do_sys_open+0x35e/0x4e0 fs/open.c:1101 __do_sys_open fs/open.c:1119 [inline] __se_sys_open fs/open.c:1114 [inline] __x64_sys_open+0x89/0xc0 fs/open.c:1114 do_syscall_64+0xc4/0x4e0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f734e459c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 00007f734e45a6cc RCX: 00000000004497b9 RDX: 0000000000000104 RSI: 00000000000a8280 RDI: 0000000020000080 RBP: 000000000071bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000007230 R14: 00000000006f02d0 R15: 00007f734e45a700 INFO: task syz-executor7:10858 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D28880 10858 6346 0x00000004 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 __rwsem_down_write_failed_common kernel/locking/rwsem-xadd.c:565 [inline] rwsem_down_write_failed+0x5e6/0xc90 kernel/locking/rwsem-xadd.c:594 call_rwsem_down_write_failed+0x17/0x30 arch/x86/lib/rwsem.S:117 __down_write arch/x86/include/asm/rwsem.h:142 [inline] down_write+0x58/0xa0 kernel/locking/rwsem.c:72 inode_lock include/linux/fs.h:713 [inline] do_truncate+0x120/0x1e0 fs/open.c:61 do_last fs/namei.c:2955 [inline] path_openat+0x2042/0x29f0 fs/namei.c:3505 do_filp_open+0x1bd/0x2c0 fs/namei.c:3540 do_sys_open+0x35e/0x4e0 fs/open.c:1101 __do_sys_open fs/open.c:1119 [inline] __se_sys_open fs/open.c:1114 [inline] __x64_sys_open+0x89/0xc0 fs/open.c:1114 do_syscall_64+0xc4/0x4e0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f734e3b4c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 00007f734e3b56cc RCX: 00000000004497b9 RDX: 0000000000000104 RSI: 00000000000a8280 RDI: 0000000020000080 RBP: 000000000071c238 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000007230 R14: 00000000006f02d0 R15: 00007f734e3b5700 INFO: task syz-executor5:10829 blocked for more than 120 seconds. Not tainted 4.17.19 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor5 D28760 10829 6308 0x80000002 Call Trace: context_switch kernel/sched/core.c:2867 [inline] __schedule+0x721/0x1e60 kernel/sched/core.c:3515 schedule+0x88/0x1c0 kernel/sched/core.c:3559 io_schedule+0x21/0x80 kernel/sched/core.c:5179 wait_on_page_bit_common mm/filemap.c:1100 [inline] __lock_page+0x2b5/0x390 mm/filemap.c:1273 lock_page include/linux/pagemap.h:483 [inline] __revoke_inmem_pages+0xb35/0x11c0 fs/f2fs/segment.c:231 drop_inmem_pages+0xa3/0x3e0 fs/f2fs/segment.c:306 f2fs_release_file+0x2c7/0x330 fs/f2fs/file.c:1556 __fput+0x2c7/0x780 fs/file_table.c:209 ____fput+0x1a/0x20 fs/file_table.c:243 task_work_run+0x151/0x1d0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8ba/0x30a0 kernel/exit.c:865 do_group_exit+0x13b/0x3a0 kernel/exit.c:968 get_signal+0x6bb/0x1650 kernel/signal.c:2482 do_signal+0x84/0x1b70 arch/x86/kernel/signal.c:810 exit_to_usermode_loop+0x155/0x190 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x445/0x4e0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 RSP: 002b:00007f1c68e74ce8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 000000000071bf80 RCX: 00000000004497b9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000071bf80 RBP: 000000000071bf80 R08: 0000000000000000 R09: 000000000071bf58 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f1c68e759c0 R15: 00007f1c68e75700 This patch tries to use trylock_page to mitigate such deadlock condition for fix. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1822897 In the reset process, the hns3 NIC driver notifies the RoCE driver to perform reset related processing by calling the .reset_notify() interface registered by the RoCE driver in hip08 SoC. In the current version, if a reset occurs simultaneously during the execution of rmmod or insmod ko, there may be Oops error as below: Internal error: Oops: 86000007 [#1] PREEMPT SMP Modules linked in: hns_roce(O) hns3(O) hclge(O) hnae3(O) [last unloaded: hns_roce_hw_v2] CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G O 4.19.0-ge00d540 #1 Hardware name: Huawei Technologies Co., Ltd. Workqueue: events hclge_reset_service_task [hclge] pstate: 60c00009 (nZCv daif +PAN +UAO) pc : 0xffff00000100b0b8 lr : 0xffff00000100aea0 sp : ffff000009afbab0 x29: ffff000009afbab0 x28: 0000000000000800 x27: 0000000000007ff0 x26: ffff80002f90c004 x25: 00000000000007ff x24: ffff000008f97000 x23: ffff80003efee0a8 x22: 0000000000001000 x21: ffff80002f917ff0 x20: ffff8000286ea070 x19: 0000000000000800 x18: 0000000000000400 x17: 00000000c4d3225d x16: 00000000000021b8 x15: 0000000000000400 x14: 0000000000000400 x13: 0000000000000000 x12: ffff80003fac6e30 x11: 0000800036303000 x10: 0000000000000001 x9 : 0000000000000000 x8 : ffff80003016d000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000000 x3 : 0000000000000004 x2 : 00000000000007ff x1 : 0000000000000000 x0 : 0000000000000000 Process kworker/0:1 (pid: 14, stack limit = 0x00000000af8f0ad9) Call trace: 0xffff00000100b0b8 0xffff00000100b3a0 hns_roce_init+0x624/0xc88 [hns_roce] 0xffff000001002df8 0xffff000001006960 hclge_notify_roce_client+0x74/0xe0 [hclge] hclge_reset_service_task+0xa58/0xbc0 [hclge] process_one_work+0x1e4/0x458 worker_thread+0x40/0x450 kthread+0x12c/0x130 ret_from_fork+0x10/0x18 Code: bad PC value In the reset process, we will release the resources firstly, and after the hardware reset is completed, we will reapply resources and reconfigure the hardware. We can solve this problem by modifying both the NIC and the RoCE driver. We can modify the concurrent processing in the NIC driver to avoid calling the .reset_notify and .uninit_instance ops at the same time. And we need to modify the RoCE driver to record the reset stage and the driver's init/uninit state, and check the state in the .reset_notify, .init_instance. and uninit_instance functions to avoid NULL pointer operation. Fixes: cb7a94c ("RDMA/hns: Add reset process for RoCE in hip08") Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> (cherry picked from commit d061eff) Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1823060 commit 0ccc387 upstream. Back in commit a89ca6f ("Btrfs: fix fsync after truncate when no_holes feature is enabled") I added an assertion that is triggered when an inline extent is found to assert that the length of the (uncompressed) data the extent represents is the same as the i_size of the inode, since that is true most of the time I couldn't find or didn't remembered about any exception at that time. Later on the assertion was expanded twice to deal with a case of a compressed inline extent representing a range that matches the sector size followed by an expanding truncate, and another case where fallocate can update the i_size of the inode without adding or updating existing extents (if the fallocate range falls entirely within the first block of the file). These two expansion/fixes of the assertion were done by commit 7ed586d ("Btrfs: fix assertion on fsync of regular file when using no-holes feature") and commit 6399fb5 ("Btrfs: fix assertion failure during fsync in no-holes mode"). These however missed the case where an falloc expands the i_size of an inode to exactly the sector size and inline extent exists, for example: $ mkfs.btrfs -f -O no-holes /dev/sdc $ mount /dev/sdc /mnt $ xfs_io -f -c "pwrite -S 0xab 0 1096" /mnt/foobar wrote 1096/1096 bytes at offset 0 1 KiB, 1 ops; 0.0002 sec (4.448 MiB/sec and 4255.3191 ops/sec) $ xfs_io -c "falloc 1096 3000" /mnt/foobar $ xfs_io -c "fsync" /mnt/foobar Segmentation fault $ dmesg [701253.602385] assertion failed: len == i_size || (len == fs_info->sectorsize && btrfs_file_extent_compression(leaf, extent) != BTRFS_COMPRESS_NONE) || (len < i_size && i_size < fs_info->sectorsize), file: fs/btrfs/tree-log.c, line: 4727 [701253.602962] ------------[ cut here ]------------ [701253.603224] kernel BUG at fs/btrfs/ctree.h:3533! [701253.603503] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI [701253.603774] CPU: 2 PID: 7192 Comm: xfs_io Tainted: G W 5.0.0-rc8-btrfs-next-45 #1 [701253.604054] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [701253.604650] RIP: 0010:assfail.constprop.23+0x18/0x1a [btrfs] (...) [701253.605591] RSP: 0018:ffffbb48c186bc48 EFLAGS: 00010286 [701253.605914] RAX: 00000000000000de RBX: ffff921d0a7afc08 RCX: 0000000000000000 [701253.606244] RDX: 0000000000000000 RSI: ffff921d36b16868 RDI: ffff921d36b16868 [701253.606580] RBP: ffffbb48c186bcf0 R08: 0000000000000000 R09: 0000000000000000 [701253.606913] R10: 0000000000000003 R11: 0000000000000000 R12: ffff921d05d2de18 [701253.607247] R13: ffff921d03b54000 R14: 0000000000000448 R15: ffff921d059ecf80 [701253.607769] FS: 00007f14da906700(0000) GS:ffff921d36b00000(0000) knlGS:0000000000000000 [701253.608163] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [701253.608516] CR2: 000056087ea9f278 CR3: 00000002268e8001 CR4: 00000000003606e0 [701253.608880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [701253.609250] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [701253.609608] Call Trace: [701253.609994] btrfs_log_inode+0xdfb/0xe40 [btrfs] [701253.610383] btrfs_log_inode_parent+0x2be/0xa60 [btrfs] [701253.610770] ? do_raw_spin_unlock+0x49/0xc0 [701253.611150] btrfs_log_dentry_safe+0x4a/0x70 [btrfs] [701253.611537] btrfs_sync_file+0x3b2/0x440 [btrfs] [701253.612010] ? do_sysinfo+0xb0/0xf0 [701253.612552] do_fsync+0x38/0x60 [701253.612988] __x64_sys_fsync+0x10/0x20 [701253.613360] do_syscall_64+0x60/0x1b0 [701253.613733] entry_SYSCALL_64_after_hwframe+0x49/0xbe [701253.614103] RIP: 0033:0x7f14da4e66d0 (...) [701253.615250] RSP: 002b:00007fffa670fdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a [701253.615647] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f14da4e66d0 [701253.616047] RDX: 000056087ea9c260 RSI: 000056087ea9c260 RDI: 0000000000000003 [701253.616450] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000010 [701253.616854] R10: 000000000000009b R11: 0000000000000246 R12: 000056087ea9c260 [701253.617257] R13: 000056087ea9c240 R14: 0000000000000000 R15: 000056087ea9dd10 (...) [701253.619941] ---[ end trace e088d74f132b6da5 ]--- Updating the assertion again to allow for this particular case would result in a meaningless assertion, plus there is currently no risk of logging content that would result in any corruption after a log replay if the size of the data encoded in an inline extent is greater than the inode's i_size (which is not currently possibe either with or without compression), therefore just remove the assertion. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1823060 commit 23da958 upstream. Syzkaller reports: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 5373 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ thesofproject#3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:put_links+0x101/0x440 fs/proc/proc_sysctl.c:1599 Code: 00 0f 85 3a 03 00 00 48 8b 43 38 48 89 44 24 20 48 83 c0 38 48 89 c2 48 89 44 24 28 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 fe 02 00 00 48 8b 74 24 20 48 c7 c7 60 2a 9d 91 RSP: 0018:ffff8881d828f238 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8881e01b1140 RCX: ffffffff8ee98267 RDX: 0000000000000007 RSI: ffffc90001479000 RDI: ffff8881e01b1178 RBP: dffffc0000000000 R08: ffffed103ee27259 R09: ffffed103ee27259 R10: 0000000000000001 R11: ffffed103ee27258 R12: fffffffffffffff4 R13: 0000000000000006 R14: ffff8881f59838c0 R15: dffffc0000000000 FS: 00007f072254f700(0000) GS:ffff8881f7100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff8b286668 CR3: 00000001f0542002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: drop_sysctl_table+0x152/0x9f0 fs/proc/proc_sysctl.c:1629 get_subdir fs/proc/proc_sysctl.c:1022 [inline] __register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335 br_netfilter_init+0xbc/0x1000 [br_netfilter] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f072254ec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f072254ec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f072254f6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: br_netfilter(+) dvb_usb_dibusb_mc_common dib3000mc dibx000_common dvb_usb_dibusb_common dvb_usb_dw2102 dvb_usb classmate_laptop palmas_regulator cn videobuf2_v4l2 v4l2_common snd_soc_bd28623 mptbase snd_usb_usx2y snd_usbmidi_lib snd_rawmidi wmi libnvdimm lockd sunrpc grace rc_kworld_pc150u rc_core rtc_da9063 sha1_ssse3 i2c_cros_ec_tunnel adxl34x_spi adxl34x nfnetlink lib80211 i5500_temp dvb_as102 dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops udc_core lnbp22 leds_lp3952 hid_roccat_ryos s1d13xxxfb mtd vport_geneve openvswitch nf_conncount nf_nat_ipv6 nsh geneve udp_tunnel ip6_udp_tunnel snd_soc_mt6351 sis_agp phylink snd_soc_adau1761_spi snd_soc_adau1761 snd_soc_adau17x1 snd_soc_core snd_pcm_dmaengine ac97_bus snd_compress snd_soc_adau_utils snd_soc_sigmadsp_regmap snd_soc_sigmadsp raid_class hid_roccat_konepure hid_roccat_common hid_roccat c2port_duramar2150 core mdio_bcm_unimac iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim devlink vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel joydev mousedev ide_pci_generic piix aesni_intel aes_x86_64 ide_core crypto_simd atkbd cryptd glue_helper serio_raw ata_generic pata_acpi i2c_piix4 floppy sch_fq_codel ip_tables x_tables ipv6 [last unloaded: lm73] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 770020de38961fd0 ]--- A new dir entry can be created in get_subdir and its 'header->parent' is set to NULL. Only after insert_header success, it will be set to 'dir', otherwise 'header->parent' is set to NULL and drop_sysctl_table is called. However in err handling path of get_subdir, drop_sysctl_table also be called on 'new->header' regardless its value of parent pointer. Then put_links is called, which triggers NULL-ptr deref when access member of header->parent. In fact we have multiple error paths which call drop_sysctl_table() there, upon failure on insert_links() we also call drop_sysctl_table().And even in the successful case on __register_sysctl_table() we still always call drop_sysctl_table().This patch fix it. Link: http://lkml.kernel.org/r/20190314085527.13244-1-yuehaibing@huawei.com Fixes: 0e47c99 ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> [3.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1823060 commit d947075 upstream. Chandan reported that fstests' generic/026 test hit a crash: BUG: Unable to handle kernel data access at 0xc00000062ac40000 Faulting instruction address: 0xc000000000092240 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries CPU: 0 PID: 27828 Comm: chacl Not tainted 5.0.0-rc2-next-20190115-00001-g6de6dba64dda #1 NIP: c000000000092240 LR: c00000000066a55c CTR: 0000000000000000 REGS: c00000062c0c3430 TRAP: 0300 Not tainted (5.0.0-rc2-next-20190115-00001-g6de6dba64dda) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 44000842 XER: 20000000 CFAR: 00007fff7f3108ac DAR: c00000062ac40000 DSISR: 40000000 IRQMASK: 0 GPR00: 0000000000000000 c00000062c0c36c0 c0000000017f4c00 c00000000121a660 GPR04: c00000062ac3fff9 0000000000000004 0000000000000020 00000000275b19c4 GPR08: 000000000000000c 46494c4500000000 5347495f41434c5f c0000000026073a0 GPR12: 0000000000000000 c0000000027a0000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c00000062ea70020 c00000062c0c38d0 0000000000000002 0000000000000002 GPR24: c00000062ac3ffe8 00000000275b19c4 0000000000000001 c00000062ac30000 GPR28: c00000062c0c38d0 c00000062ac30050 c00000062ac30058 0000000000000000 NIP memcmp+0x120/0x690 LR xfs_attr3_leaf_lookup_int+0x53c/0x5b0 Call Trace: xfs_attr3_leaf_lookup_int+0x78/0x5b0 (unreliable) xfs_da3_node_lookup_int+0x32c/0x5a0 xfs_attr_node_addname+0x170/0x6b0 xfs_attr_set+0x2ac/0x340 __xfs_set_acl+0xf0/0x230 xfs_set_acl+0xd0/0x160 set_posix_acl+0xc0/0x130 posix_acl_xattr_set+0x68/0x110 __vfs_setxattr+0xa4/0x110 __vfs_setxattr_noperm+0xac/0x240 vfs_setxattr+0x128/0x130 setxattr+0x248/0x600 path_setxattr+0x108/0x120 sys_setxattr+0x28/0x40 system_call+0x5c/0x70 Instruction dump: 7d201c28 7d402428 7c295040 38630008 38840008 408201f0 4200ffe8 2c050000 4182ff6c 20c50008 54c61838 7d201c28 <7d402428> 7d293436 7d4a3436 7c295040 The instruction dump decodes as: subfic r6,r5,8 rlwinm r6,r6,3,0,28 ldbrx r9,0,r3 ldbrx r10,0,r4 <- Which shows us doing an 8 byte load from c00000062ac3fff9, which crosses the page boundary at c00000062ac40000 and faults. It's not OK for memcmp to read past the end of the source or destination buffers if that would cross a page boundary, because we don't know that the next page is mapped. As pointed out by Segher, we can read past the end of the source or destination as long as we don't cross a 4K boundary, because that's our minimum page size on all platforms. The bug is in the code at the .Lcmp_rest_lt8bytes label. When we get there we know that s1 is 8-byte aligned and we have at least 1 byte to read, so a single 8-byte load won't read past the end of s1 and cross a page boundary. But we have to be more careful with s2. So check if it's within 8 bytes of a 4K boundary and if so go to the byte-by-byte loop. Fixes: 2d9ee32 ("powerpc/64: Align bytes before fall back to .Lshort in powerpc64 memcmp()") Cc: stable@vger.kernel.org # v4.19+ Reported-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Tested-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit bc31d0c ] We have a customer reporting crashes in lock_get_status() with many "Leaked POSIX lock" messages preceeding the crash. Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x56 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... Leaked POSIX lock on dev=0x0:0x53 ... POSIX: fl_owner=ffff8900e7b79380 fl_flags=0x1 fl_type=0x1 fl_pid=20709 Leaked POSIX lock on dev=0x0:0x4b ino... Leaked locks on dev=0x0:0x4b ino=0xf911400000029: POSIX: fl_owner=ffff89f41c870e00 fl_flags=0x1 fl_type=0x1 fl_pid=19592 stack segment: 0000 [#1] SMP Modules linked in: binfmt_misc msr tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_gss_krb5 arc4 ecb auth_rpcgss nfsv4 md4 nfs nls_utf8 lockd grace cifs sunrpc ccm dns_resolver fscache af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock xfs libcrc32c sb_edac edac_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg ansi_cprng vmw_balloon aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev pcspkr vmxnet3 i2c_piix4 vmw_vmci shpchp fjes processor button ac btrfs xor raid6_pq sr_mod cdrom ata_generic sd_mod ata_piix vmwgfx crc32c_intel drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm serio_raw ahci libahci drm libata vmw_pvscsi sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: Yes CPU: 6 PID: 28250 Comm: lsof Not tainted 4.4.156-94.64-default #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 task: ffff88a345f28740 ti: ffff88c74005c000 task.ti: ffff88c74005c000 RIP: 0010:[<ffffffff8125dcab>] [<ffffffff8125dcab>] lock_get_status+0x9b/0x3b0 RSP: 0018:ffff88c74005fd90 EFLAGS: 00010202 RAX: ffff89bde83e20ae RBX: ffff89e870003d18 RCX: 0000000049534f50 RDX: ffffffff81a3541f RSI: ffffffff81a3544e RDI: ffff89bde83e20ae RBP: 0026252423222120 R08: 0000000020584953 R09: 000000000000ffff R10: 0000000000000000 R11: ffff88c74005fc70 R12: ffff89e5ca7b1340 R13: 00000000000050e5 R14: ffff89e870003d30 R15: ffff89e5ca7b1340 FS: 00007fafd64be800(0000) GS:ffff89f41fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001c80018 CR3: 000000a522048000 CR4: 0000000000360670 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: 0000000000000208 ffffffff81a3d6b6 ffff89e870003d30 ffff89e870003d18 ffff89e5ca7b1340 ffff89f41738d7c0 ffff89e870003d30 ffff89e5ca7b1340 ffffffff8125e08f 0000000000000000 ffff89bc22b67d00 ffff88c74005ff28 Call Trace: [<ffffffff8125e08f>] locks_show+0x2f/0x70 [<ffffffff81230ad1>] seq_read+0x251/0x3a0 [<ffffffff81275bbc>] proc_reg_read+0x3c/0x70 [<ffffffff8120e456>] __vfs_read+0x26/0x140 [<ffffffff8120e9da>] vfs_read+0x7a/0x120 [<ffffffff8120faf2>] SyS_read+0x42/0xa0 [<ffffffff8161cbc3>] entry_SYSCALL_64_fastpath+0x1e/0xb7 When Linux closes a FD (close(), close-on-exec, dup2(), ...) it calls filp_close() which also removes all posix locks. The lock struct is initialized like so in filp_close() and passed down to cifs ... lock.fl_type = F_UNLCK; lock.fl_flags = FL_POSIX | FL_CLOSE; lock.fl_start = 0; lock.fl_end = OFFSET_MAX; ... Note the FL_CLOSE flag, which hints the VFS code that this unlocking is done for closing the fd. filp_close() locks_remove_posix(filp, id); vfs_lock_file(filp, F_SETLK, &lock, NULL); return filp->f_op->lock(filp, cmd, fl) => cifs_lock() rc = cifs_setlk(file, flock, type, wait_flag, posix_lck, lock, unlock, xid); rc = server->ops->mand_unlock_range(cfile, flock, xid); if (flock->fl_flags & FL_POSIX && !rc) rc = locks_lock_file_wait(file, flock) Notice how we don't call locks_lock_file_wait() which does the generic VFS lock/unlock/wait work on the inode if rc != 0. If we are closing the handle, the SMB server is supposed to remove any locks associated with it. Similarly, cifs.ko frees and wakes up any lock and lock waiter when closing the file: cifs_close() cifsFileInfo_put(file->private_data) /* * Delete any outstanding lock records. We'll lose them when the file * is closed anyway. */ down_write(&cifsi->lock_sem); list_for_each_entry_safe(li, tmp, &cifs_file->llist->locks, llist) { list_del(&li->llist); cifs_del_lock_waiters(li); kfree(li); } list_del(&cifs_file->llist->llist); kfree(cifs_file->llist); up_write(&cifsi->lock_sem); So we can safely ignore unlocking failures in cifs_lock() if they happen with the FL_CLOSE flag hint set as both the server and the client take care of it during the actual closing. This is not a proper fix for the unlocking failure but it's safe and it seems to prevent the lock leakages and crashes the customer experiences. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit 0c81585 ] After offlining a memory block, kmemleak scan will trigger a crash, as it encounters a page ext address that has already been freed during memory offlining. At the beginning in alloc_page_ext(), it calls kmemleak_alloc(), but it does not call kmemleak_free() in free_page_ext(). BUG: unable to handle kernel paging request at ffff888453d00000 PGD 128a01067 P4D 128a01067 PUD 128a04067 PMD 47e09e067 PTE 800ffffbac2ff060 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 1 PID: 1594 Comm: bash Not tainted 5.0.0-rc8+ thesofproject#15 Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017 RIP: 0010:scan_block+0xb5/0x290 Code: 85 6e 01 00 00 48 b8 00 00 30 f5 81 88 ff ff 48 39 c3 0f 84 5b 01 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 0f 85 87 01 00 00 <4c> 8b 3b e8 f3 0c fa ff 4c 39 3d 0c 6b 4c 01 0f 87 08 01 00 00 4c RSP: 0018:ffff8881ec57f8e0 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff888453d00000 RCX: ffffffffa61e5a54 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff888453d00000 RBP: ffff8881ec57f920 R08: fffffbfff4ed588d R09: fffffbfff4ed588c R10: fffffbfff4ed588c R11: ffffffffa76ac463 R12: dffffc0000000000 R13: ffff888453d00ff9 R14: ffff8881f80cef48 R15: ffff8881f80cef48 FS: 00007f6c0e3f8740(0000) GS:ffff8881f7680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888453d00000 CR3: 00000001c4244003 CR4: 00000000001606a0 Call Trace: scan_gray_list+0x269/0x430 kmemleak_scan+0x5a8/0x10f0 kmemleak_write+0x541/0x6ca full_proxy_write+0xf8/0x190 __vfs_write+0xeb/0x980 vfs_write+0x15a/0x4f0 ksys_write+0xd2/0x1b0 __x64_sys_write+0x73/0xb0 do_syscall_64+0xeb/0xaaa entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f6c0dad73b8 Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 63 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 RSP: 002b:00007ffd5b863cb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f6c0dad73b8 RDX: 0000000000000005 RSI: 000055a9216e1710 RDI: 0000000000000001 RBP: 000055a9216e1710 R08: 000000000000000a R09: 00007ffd5b863840 R10: 000000000000000a R11: 0000000000000246 R12: 00007f6c0dda9780 R13: 0000000000000005 R14: 00007f6c0dda4740 R15: 0000000000000005 Modules linked in: nls_iso8859_1 nls_cp437 vfat fat kvm_intel kvm irqbypass efivars ip_tables x_tables xfs sd_mod ahci libahci igb i2c_algo_bit libata i2c_core dm_mirror dm_region_hash dm_log dm_mod efivarfs CR2: ffff888453d00000 ---[ end trace ccf646c7456717c5 ]--- Kernel panic - not syncing: Fatal exception Shutting down cpus with NMI Kernel Offset: 0x24c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- Link: http://lkml.kernel.org/r/20190227173147.75650-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit afd0738 ] One of the vmalloc stress test case triggers the kernel BUG(): <snip> [60.562151] ------------[ cut here ]------------ [60.562154] kernel BUG at mm/vmalloc.c:512! [60.562206] invalid opcode: 0000 [#1] PREEMPT SMP PTI [60.562247] CPU: 0 PID: 430 Comm: vmalloc_test/0 Not tainted 4.20.0+ thesofproject#161 [60.562293] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [60.562351] RIP: 0010:alloc_vmap_area+0x36f/0x390 <snip> it can happen due to big align request resulting in overflowing of calculated address, i.e. it becomes 0 after ALIGN()'s fixup. Fix it by checking if calculated address is within vstart/vend range. Link: http://lkml.kernel.org/r/20190124115648.9433-2-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joel Fernandes <joelaf@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit 5704a06 ] (Taken from https://bugzilla.kernel.org/show_bug.cgi?id=200647) 'get_unused_fd_flags' in kthread cause kernel crash. It works fine on 4.1, but causes crash after get 64 fds. It also cause crash on ubuntu1404/1604/1804, centos7.5, and the crash messages are almost the same. The crash message on centos7.5 shows below: start fd 61 start fd 62 start fd 63 BUG: unable to handle kernel NULL pointer dereference at (null) IP: __wake_up_common+0x2e/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: test(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter devlink sunrpc kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd sg ppdev pcspkr virtio_balloon parport_pc parport i2c_piix4 joydev ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi virtio_scsi virtio_console virtio_net cirrus drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm crct10dif_pclmul crct10dif_common crc32c_intel drm ata_piix serio_raw libata virtio_pci virtio_ring i2c_core virtio floppy dm_mirror dm_region_hash dm_log dm_mod CPU: 2 PID: 1820 Comm: test_fd Kdump: loaded Tainted: G OE ------------ 3.10.0-862.3.3.el7.x86_64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 task: ffff8e92b9431fa0 ti: ffff8e94247a0000 task.ti: ffff8e94247a0000 RIP: 0010:__wake_up_common+0x2e/0x90 RSP: 0018:ffff8e94247a2d18 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffffffff9d09daa0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffff9d09daa0 RBP: ffff8e94247a2d50 R08: 0000000000000000 R09: ffff8e92b95dfda8 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9d09daa8 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8e9434e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000017c686000 CR4: 00000000000207e0 Call Trace: __wake_up+0x39/0x50 expand_files+0x131/0x250 __alloc_fd+0x47/0x170 get_unused_fd_flags+0x30/0x40 test_fd+0x12a/0x1c0 [test] kthread+0xd1/0xe0 ret_from_fork_nospec_begin+0x21/0x21 Code: 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 54 49 89 fc 49 83 c4 08 53 48 83 ec 10 48 8b 47 08 89 55 cc 4c 89 45 d0 <48> 8b 08 49 39 c4 48 8d 78 e8 4c 8d 69 e8 75 08 eb 3b 4c 89 ef RIP __wake_up_common+0x2e/0x90 RSP <ffff8e94247a2d18> CR2: 0000000000000000 This issue exists since CentOS 7.5 3.10.0-862 and CentOS 7.4 (3.10.0-693.21.1 ) is ok. Root cause: the item 'resize_wait' is not initialized before being used. Reported-by: Richard Zhang <zhang.zijian@h3c.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit dcd5fb8 ] Reference counting in amdgpu_dm_connector for amdgpu_dm_connector::dc_sink and amdgpu_dm_connector::dc_em_sink as well as in dc_link::local_sink seems to be out of shape. Thus make reference counting consistent for these members and just plain increment the reference count when the variable gets assigned and decrement when the pointer is set to zero or replaced. Also simplify reference counting in selected function sopes to be sure the reference is released in any case. In some cases add NULL pointer check before dereferencing. At a hand full of places a comment is placed to stat that the reference increment happened already somewhere else. This actually fixes the following kernel bug on my system when enabling display core in amdgpu. There are some more similar bug reports around, so it probably helps at more places. kernel BUG at mm/slub.c:294! invalid opcode: 0000 [#1] SMP PTI CPU: 9 PID: 1180 Comm: Xorg Not tainted 5.0.0-rc1+ thesofproject#2 Hardware name: Supermicro X10DAi/X10DAI, BIOS 3.0a 02/05/2018 RIP: 0010:__slab_free+0x1e2/0x3d0 Code: 8b 54 24 30 48 89 4c 24 28 e8 da fb ff ff 4c 8b 54 24 28 85 c0 0f 85 67 fe ff ff 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b 49 3b 5c 24 28 75 ab 48 8b 44 24 30 49 89 4c 24 28 49 89 44 RSP: 0018:ffffb0978589fa90 EFLAGS: 00010246 RAX: ffff92f12806c400 RBX: 0000000080200019 RCX: ffff92f12806c400 RDX: ffff92f12806c400 RSI: ffffdd6421a01a00 RDI: ffff92ed2f406e80 RBP: ffffb0978589fb40 R08: 0000000000000001 R09: ffffffffc0ee4748 R10: ffff92f12806c400 R11: 0000000000000001 R12: ffffdd6421a01a00 R13: ffff92f12806c400 R14: ffff92ed2f406e80 R15: ffffdd6421a01a20 FS: 00007f4170be0ac0(0000) GS:ffff92ed2fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562818aaa000 CR3: 000000045745a002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? drm_dbg+0x87/0x90 [drm] dc_stream_release+0x28/0x50 [amdgpu] amdgpu_dm_connector_mode_valid+0xb4/0x1f0 [amdgpu] drm_helper_probe_single_connector_modes+0x492/0x6b0 [drm_kms_helper] drm_mode_getconnector+0x457/0x490 [drm] ? drm_connector_property_set_ioctl+0x60/0x60 [drm] drm_ioctl_kernel+0xa9/0xf0 [drm] drm_ioctl+0x201/0x3a0 [drm] ? drm_connector_property_set_ioctl+0x60/0x60 [drm] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0xa4/0x630 ? __sys_recvmsg+0x83/0xa0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f417110809b Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdd8d1c268 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000562818a8ebc0 RCX: 00007f417110809b RDX: 00007ffdd8d1c2a0 RSI: 00000000c05064a7 RDI: 0000000000000012 RBP: 00007ffdd8d1c2a0 R08: 0000562819012280 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c05064a7 R13: 0000000000000012 R14: 0000000000000012 R15: 00007ffdd8d1c2a0 Modules linked in: nfsv4 dns_resolver nfs lockd grace fscache fuse vfat fat amdgpu intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul chash gpu_sched crc32_pclmul snd_hda_codec_realtek ghash_clmulni_intel amd_iommu_v2 iTCO_wdt iTCO_vendor_support ttm snd_hda_codec_generic snd_hda_codec_hdmi ledtrig_audio snd_hda_intel drm_kms_helper snd_hda_codec intel_cstate snd_hda_core drm snd_hwdep snd_seq snd_seq_device intel_uncore snd_pcm intel_rapl_perf snd_timer snd soundcore ioatdma pcspkr intel_wmi_thunderbolt mxm_wmi i2c_i801 lpc_ich pcc_cpufreq auth_rpcgss sunrpc igb crc32c_intel i2c_algo_bit dca wmi hid_cherry analog gameport joydev This patch is based on agd5f/drm-next-5.1-wip. This patch does not require all of that, but agd5f/drm-next-5.1-wip contains at least one more dc_sink counting fix that I could spot. Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit f6d9758 ] The following false positive lockdep splat has been observed. ====================================================== WARNING: possible circular locking dependency detected 4.20.0+ thesofproject#302 Not tainted ------------------------------------------------------ systemd-udevd/160 is trying to acquire lock: edea6080 (&chip->reg_lock){+.+.}, at: __setup_irq+0x640/0x704 but task is already holding lock: edff0340 (&desc->request_mutex){+.+.}, at: __setup_irq+0xa0/0x704 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&desc->request_mutex){+.+.}: mutex_lock_nested+0x1c/0x24 __setup_irq+0xa0/0x704 request_threaded_irq+0xd0/0x150 mv88e6xxx_probe+0x41c/0x694 [mv88e6xxx] mdio_probe+0x2c/0x54 really_probe+0x200/0x2c4 driver_probe_device+0x5c/0x174 __driver_attach+0xd8/0xdc bus_for_each_dev+0x58/0x7c bus_add_driver+0xe4/0x1f0 driver_register+0x7c/0x110 mdio_driver_register+0x24/0x58 do_one_initcall+0x74/0x2e8 do_init_module+0x60/0x1d0 load_module+0x1968/0x1ff4 sys_finit_module+0x8c/0x98 ret_fast_syscall+0x0/0x28 0xbedf2ae8 -> #0 (&chip->reg_lock){+.+.}: __mutex_lock+0x50/0x8b8 mutex_lock_nested+0x1c/0x24 __setup_irq+0x640/0x704 request_threaded_irq+0xd0/0x150 mv88e6xxx_g2_irq_setup+0xcc/0x1b4 [mv88e6xxx] mv88e6xxx_probe+0x44c/0x694 [mv88e6xxx] mdio_probe+0x2c/0x54 really_probe+0x200/0x2c4 driver_probe_device+0x5c/0x174 __driver_attach+0xd8/0xdc bus_for_each_dev+0x58/0x7c bus_add_driver+0xe4/0x1f0 driver_register+0x7c/0x110 mdio_driver_register+0x24/0x58 do_one_initcall+0x74/0x2e8 do_init_module+0x60/0x1d0 load_module+0x1968/0x1ff4 sys_finit_module+0x8c/0x98 ret_fast_syscall+0x0/0x28 0xbedf2ae8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&desc->request_mutex); lock(&chip->reg_lock); lock(&desc->request_mutex); lock(&chip->reg_lock); &desc->request_mutex refer to two different mutex. #1 is the GPIO for the chip interrupt. thesofproject#2 is the chained interrupt between global 1 and global 2. Add lockdep classes to the GPIO interrupt to avoid this. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit bcf3b67 ] when create DMA pool for cmd frames failed, we should return -ENOMEM, instead of 0. In some case in: megasas_init_adapter_fusion() -->megasas_alloc_cmds() -->megasas_create_frame_pool create DMA pool failed, --> megasas_free_cmds() [1] -->megasas_alloc_cmds_fusion() failed, then goto fail_alloc_cmds. -->megasas_free_cmds() [2] we will call megasas_free_cmds twice, [1] will kfree cmd_list, [2] will use cmd_list.it will cause a problem: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc000f70000 [00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003, *pmd=0000001fbf894003, *pte=006000006d000707 Internal error: Oops: 96000005 [#1] SMP Modules linked in: CPU: 18 PID: 1 Comm: swapper/0 Not tainted task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000 PC is at megasas_free_cmds+0x30/0x70 LR is at megasas_free_cmds+0x24/0x70 ... Call trace: [<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70 [<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8 [<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760 [<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8 [<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4 [<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c [<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430 [<ffffffc00053a92c>] __driver_attach+0xa8/0xb0 [<ffffffc000538178>] bus_for_each_dev+0x74/0xc8 [<ffffffc000539e88>] driver_attach+0x28/0x34 [<ffffffc000539a18>] bus_add_driver+0x16c/0x248 [<ffffffc00053b234>] driver_register+0x6c/0x138 [<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c [<ffffffc000ce3868>] megasas_init+0xc0/0x1a8 [<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec [<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284 [<ffffffc0008d90b8>] kernel_init+0x1c/0xe4 Signed-off-by: Jason Yan <yanaijie@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit 0510748 ] We were crashing when processing a negative fd: Program received signal SIGSEGV, Segmentation fault. 0x0000000000609bbf in syscall_arg__scnprintf_ioctl_cmd (bf=0x1172eca "", size=2038, arg=0x7fffffff8360) at trace/beauty/ioctl.c:182 182 if (file->dev_maj == USB_DEVICE_MAJOR) Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.6-28.fc29.x86_64 elfutils-libelf-0.174-5.fc29.x86_64 elfutils-libs-0.174-5.fc29.x86_64 glib2-2.58.3-1.fc29.x86_64 libbabeltrace-1.5.6-1.fc29.x86_64 libunwind-1.2.1-6.fc29.x86_64 libuuid-2.32.1-1.fc29.x86_64 libxcrypt-4.4.3-2.fc29.x86_64 numactl-libs-2.0.12-1.fc29.x86_64 openssl-libs-1.1.1a-1.fc29.x86_64 pcre-8.42-6.fc29.x86_64 perl-libs-5.28.1-427.fc29.x86_64 popt-1.16-15.fc29.x86_64 python2-libs-2.7.15-11.fc29.x86_64 slang-2.3.2-4.fc29.x86_64 xz-libs-5.2.4-3.fc29.x86_64 (gdb) bt #0 0x0000000000609bbf in syscall_arg__scnprintf_ioctl_cmd (bf=0x1172eca "", size=2038, arg=0x7fffffff8360) at trace/beauty/ioctl.c:182 #1 0x000000000048e295 in syscall__scnprintf_val (sc=0x123b500, bf=0x1172eca "", size=2038, arg=0x7fffffff8360, val=21519) at builtin-trace.c:1594 thesofproject#2 0x000000000048e60d in syscall__scnprintf_args (sc=0x123b500, bf=0x1172ec6 "-1, ", size=2042, args=0x7ffff6a7c034 "\377\377\377\377", augmented_args=0x7ffff6a7c064, augmented_args_size=4, trace=0x7fffffffa8d0, thread=0x1175cd0) at builtin-trace.c:1661 thesofproject#3 0x000000000048f04e in trace__sys_enter (trace=0x7fffffffa8d0, evsel=0xb260b0, event=0x7ffff6a7bfe8, sample=0x7fffffff84f0) at builtin-trace.c:1880 thesofproject#4 0x00000000004915a4 in trace__handle_event (trace=0x7fffffffa8d0, event=0x7ffff6a7bfe8, sample=0x7fffffff84f0) at builtin-trace.c:2590 thesofproject#5 0x0000000000491eed in __trace__deliver_event (trace=0x7fffffffa8d0, event=0x7ffff6a7bfe8) at builtin-trace.c:2818 thesofproject#6 0x0000000000492030 in trace__deliver_event (trace=0x7fffffffa8d0, event=0x7ffff6a7bfe8) at builtin-trace.c:2845 thesofproject#7 0x0000000000492896 in trace__run (trace=0x7fffffffa8d0, argc=0, argv=0x7fffffffdb58) at builtin-trace.c:3040 thesofproject#8 0x000000000049603a in cmd_trace (argc=0, argv=0x7fffffffdb58) at builtin-trace.c:3952 thesofproject#9 0x00000000004d5103 in main (argc=1, argv=0x7fffffffdb58) at perf.c:474 (gdb) p fd $1 = -1 (gdb) p file $7 = (struct file *) 0xfffffffffffffff0 (gdb) p ((struct thread_trace *)arg->thread)->files.table + fd $8 = (struct file *) 0xfffffffffffffff0 (gdb) Check for that and return NULL instead. This problem was introduced recently, the other codepaths leading to thread_trace__files_entry() check for negative fds, like thread__fd_path(), but we need to do it at thread_trace__files_entry() as more users are now calling it directly. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 2d47338 ("perf trace beauty: Export function to get the files for a thread") Link: https://lkml.kernel.org/n/tip-oq7bvaaf07gsd4yqty3107u2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit f25191b ] The following traceback is sometimes seen when booting an image in qemu: [ 54.608293] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 54.611085] Fusion MPT base driver 3.04.20 [ 54.611877] Copyright (c) 1999-2008 LSI Corporation [ 54.616234] Fusion MPT SAS Host driver 3.04.20 [ 54.635139] sysctl duplicate entry: /dev/cdrom//info [ 54.639578] CPU: 0 PID: 266 Comm: kworker/u4:5 Not tainted 5.0.0-rc5 #1 [ 54.639578] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 54.641273] Workqueue: events_unbound async_run_entry_fn [ 54.641273] Call Trace: [ 54.641273] dump_stack+0x67/0x90 [ 54.641273] __register_sysctl_table+0x50b/0x570 [ 54.641273] ? rcu_read_lock_sched_held+0x6f/0x80 [ 54.641273] ? kmem_cache_alloc_trace+0x1c7/0x1f0 [ 54.646814] __register_sysctl_paths+0x1c8/0x1f0 [ 54.646814] cdrom_sysctl_register.part.7+0xc/0x5f [ 54.646814] register_cdrom.cold.24+0x2a/0x33 [ 54.646814] sr_probe+0x4bd/0x580 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] really_probe+0xd6/0x260 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] driver_probe_device+0x4a/0xb0 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] bus_for_each_drv+0x73/0xc0 [ 54.646814] __device_attach+0xd6/0x130 [ 54.646814] bus_probe_device+0x9a/0xb0 [ 54.646814] device_add+0x40c/0x670 [ 54.646814] ? __pm_runtime_resume+0x4f/0x80 [ 54.646814] scsi_sysfs_add_sdev+0x81/0x290 [ 54.646814] scsi_probe_and_add_lun+0x888/0xc00 [ 54.646814] ? scsi_autopm_get_host+0x21/0x40 [ 54.646814] __scsi_add_device+0x116/0x130 [ 54.646814] ata_scsi_scan_host+0x93/0x1c0 [ 54.646814] async_run_entry_fn+0x34/0x100 [ 54.646814] process_one_work+0x237/0x5e0 [ 54.646814] worker_thread+0x37/0x380 [ 54.646814] ? rescuer_thread+0x360/0x360 [ 54.646814] kthread+0x118/0x130 [ 54.646814] ? kthread_create_on_node+0x60/0x60 [ 54.646814] ret_from_fork+0x3a/0x50 The only sensible explanation is that cdrom_sysctl_register() is called twice, once from the module init function and once from register_cdrom(). cdrom_sysctl_register() is not mutex protected and may happily execute twice if the second call is made before the first call is complete. Use a static atomic to ensure that the function is executed exactly once. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit 51294bf ] On cases where device tree entries for fuse and clock provider are in different order, fuse driver needs to defer probing. This leads to freeing incorrect IO base address as the fuse->base variable gets overwritten once during first probe invocation. This leads to the following spew during boot: [ 3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94) [ 3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8 [ 3.082318] Modules linked in: [ 3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S 4.19.7-tegra-gce119d3 #1 [ 3.082340] Hardware name: quill (DT) [ 3.082353] Workqueue: events deferred_probe_work_func [ 3.082364] pstate: 40000005 (nZcv daif -PAN -UAO) [ 3.082372] pc : __vunmap+0xcc/0xd8 [ 3.082379] lr : __vunmap+0xcc/0xd8 [ 3.082385] sp : ffff00000a1d3b60 [ 3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000 [ 3.082402] x27: 0000000000000000 x26: ffff000008e8b610 [ 3.082413] x25: 0000000000000000 x24: 0000000000000009 [ 3.082423] x23: ffff000009221a90 x22: ffff000009f6d000 [ 3.082432] x21: 0000000000000000 x20: 0000000000000000 [ 3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff [ 3.082452] x17: 0000000000000000 x16: 0000000000000000 [ 3.082462] x15: ffff0000091396c8 x14: 0720072007200720 [ 3.082471] x13: 0720072007200720 x12: 0720072907340739 [ 3.082481] x11: 0764076607380765 x10: 0766076307300730 [ 3.082491] x9 : 0730073007300730 x8 : 0730073007280720 [ 3.082501] x7 : 0761076507720761 x6 : 0000000000000102 [ 3.082510] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8 [ 3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000 [ 3.082538] Call trace: [ 3.082545] __vunmap+0xcc/0xd8 [ 3.082552] vunmap+0x24/0x30 [ 3.082561] __iounmap+0x2c/0x38 [ 3.082569] tegra_fuse_probe+0xc8/0x118 [ 3.082577] platform_drv_probe+0x50/0xa0 [ 3.082585] really_probe+0x1b0/0x288 [ 3.082593] driver_probe_device+0x58/0x100 [ 3.082601] __device_attach_driver+0x98/0xf0 [ 3.082609] bus_for_each_drv+0x64/0xc8 [ 3.082616] __device_attach+0xd8/0x130 [ 3.082624] device_initial_probe+0x10/0x18 [ 3.082631] bus_probe_device+0x90/0x98 [ 3.082638] deferred_probe_work_func+0x74/0xb0 [ 3.082649] process_one_work+0x1e0/0x318 [ 3.082656] worker_thread+0x228/0x450 [ 3.082664] kthread+0x128/0x130 [ 3.082672] ret_from_fork+0x10/0x18 [ 3.082678] ---[ end trace 0810fe6ba772c1c7 ]--- Fix this by retaining the value of fuse->base until driver has successfully probed. Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit f9aa52a ] As Dan Carpenter as below: The patch df634f4: "f2fs: use rb_*_cached friends" from Oct 4, 2018, leads to the following static checker warning: fs/f2fs/extent_cache.c:606 f2fs_update_extent_tree_range() error: uninitialized symbol 'leftmost'. And also Eric Biggers, and Kyungtae Kim reported, there is an UBSAN warning described as below: We report a bug in linux-4.20.2: "UBSAN: Undefined behaviour in fs/f2fs/extent_cache.c" kernel config: https://kt0755.github.io/etc/config_v4.20_stable repro: https://kt0755.github.io/etc/repro.4a3e7.c (f2fs is mounted on /mnt/f2fs/) This arose in f2fs_update_extent_tree_range (fs/f2fs/extent_cache.c:605). It seems that, for some reason, its last argument became "24" although that was supposed to be bool type. ========================================= UBSAN: Undefined behaviour in fs/f2fs/extent_cache.c:605:4 load of value 24 is not a valid value for type '_Bool' CPU: 0 PID: 6774 Comm: syz-executor5 Not tainted 4.20.2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xb1/0x118 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x94 lib/ubsan.c:159 __ubsan_handle_load_invalid_value+0x17a/0x1be lib/ubsan.c:457 f2fs_update_extent_tree_range+0x1d4a/0x1d50 fs/f2fs/extent_cache.c:605 f2fs_update_extent_cache+0x2b6/0x350 fs/f2fs/extent_cache.c:804 f2fs_update_data_blkaddr+0x61/0x70 fs/f2fs/data.c:656 f2fs_outplace_write_data+0x1d6/0x4b0 fs/f2fs/segment.c:3140 f2fs_convert_inline_page+0x86d/0x2060 fs/f2fs/inline.c:163 f2fs_convert_inline_inode+0x6b5/0xad0 fs/f2fs/inline.c:208 f2fs_preallocate_blocks+0x78b/0xb00 fs/f2fs/data.c:982 f2fs_file_write_iter+0x31b/0xf40 fs/f2fs/file.c:3062 call_write_iter include/linux/fs.h:1857 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x538/0x6e0 fs/read_write.c:487 vfs_write+0x1b3/0x520 fs/read_write.c:549 ksys_write+0xde/0x1c0 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x7e/0xc0 fs/read_write.c:607 do_syscall_64+0xbe/0x4f0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 Code: e8 8c 9f 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 9b 6b fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1ea15edc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f1ea15ee6cc RCX: 00000000004497b9 RDX: 0000000000001000 RSI: 0000000020000140 RDI: 0000000000000013 RBP: 000000000071bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000bb50 R14: 00000000006f4bf0 R15: 00007f1ea15ee700 ========================================= As I checked, this uninitialized variable won't cause extent cache corruption, but in order to avoid such kind of warning of both UBSAN and smatch, fix to initialize related variable. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Eric Biggers <ebiggers@google.com> Reported-by: Kyungtae Kim <kt0755@gmail.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1828410 [ Upstream commit 00eb5b0 ] After drm_fb_helper_fbdev_setup calls drm_fb_helper_init, "dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will have some effect). After that, drm_fb_helper_initial_config is called which may call the "fb_probe" driver callback. This driver callback may call drm_fb_helper_defio_init (as is done by drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs) as documented. These are normally cleaned up on exit by drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini. If an error occurs after "fb_probe", but before setup is complete, then calling just drm_fb_helper_fini will leak resources. This was triggered by df2052c ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"): [ 50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer [ 50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38) [ 50.011456] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 2 [ 50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0 [ 50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 4.20.0-rc7 #1 [ 50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0 ... [ 50.023155] Call Trace: [ 50.023155] ? bochs_kms_fini+0x1e/0x30 [ 50.023155] ? bochs_unload+0x18/0x40 This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n. Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian Link: https://lkml.kernel.org/r/20181223004315.GA11455@al Fixes: 8741216 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()") Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181223005507.28328-1-peter@lekensteyn.nl Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

Fabrice Gasnier and others added 30 commits March 17, 2018 22:32

i2c: xlp9xx: Add MAINTAINERS entry

f3c6a2c

The i2c XLP9xx driver is maintained by Cavium. Add George Cherian and Jan Glauber as the Maintainers. Signed-off-by: George Cherian <george.cherian@cavium.com> Acked-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

nds32: Fix the unknown type u8 issue.

bb91267

It broke the 'allmodconfig' build. We need to include <linux/types.h> to make sure the type is defined before using it. Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

nds32: To refine readability of INT_MASK_INITAIAL_VAL

8769c22

Refine readability of INT_MASK_INITAIAL_VAL with meaningful macro instead of magic number. Signed-off-by: Greentime Hu <greentime@andestech.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

update#1

update#1
RanderWang merged 251 commits intoRanderWang:topic/sof-devfrom
thesofproject:topic/sof-dev

RanderWang commented Jun 28, 2018

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

20 participants

Conversation

RanderWang commented Jun 28, 2018

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

20 participants