Skip to content

Bad error message: mypy reports 'Name is not defined' when using an object member as super class of another class #8603

Description

@sandrinr

Consider the following valid Python 3 code:

class A():
    pass

class B():
    def __init__(self):
        self.a = A

b = B()

class C(b.a):
    pass

Actual behavior:
Mypy will report Name 'b.a' is not defined on the line class C(b.a):.

Expected behavior:
No error reported by Mypy.

Python version: 3.8.2
Mypy version: 0.770 (master not checked)
Flags: no flags

Activity

  1. msullivan commented on Apr 3, 2020

    @msullivan
    Collaborator

    This is an incorrect error message, certainly. We're not going to support this code, though.

  2. changed the title [-]Mypy reports 'Name is not defined' when using an object member as super class of another class[/-] [+]Bad error message: mypy reports 'Name is not defined' when using an object member as super class of another class[/+] on Apr 3, 2020
  3. vhawk19 commented on Apr 19, 2020

    @vhawk19

    @msullivan Should the error message be changed?

  4. JelleZijlstra commented on Apr 21, 2020

    @JelleZijlstra
    Member

    We'd be likely to accept a PR that improves the error message (something like "object member cannot be used as base class", I suppose).

  5. akash-suresh commented on May 16, 2020

    @akash-suresh

    @JelleZijlstra This is my first time contributing. Can I pick this up?

  6. harshkumar02 commented on Oct 4, 2020

    @harshkumar02

    ``I would like to contribute to this issue. Can I pull this up?

  7. PrasanthChettri commented on Feb 10, 2021

    @PrasanthChettri
    Contributor

    Can I look into this, seems like I can handle this one

  8. PrasanthChettri commented on Feb 14, 2021

    @PrasanthChettri
    Contributor

    @msullivan @JelleZijlstra I looked through the codebase where I can set up a check for this, I think I have to implement something around semanal/analyze base class or semanal/expr to analyzed type and have to check if the base class is a object member, I tried everything but I don't seem to know how to do this, could anybody guide me through this, I'm kind of a newbie.

  9. williamjmorenor commented on Jun 10, 2021

    @williamjmorenor

    Using per line comment as # type: ignore[name-defined] at less silence this error message

  10. SwagatSBhuyan commented on Nov 14, 2021

    @SwagatSBhuyan

    If this issue is not solved, I would like to be assigned this @msullivan @JelleZijlstra

  11. kai3341 commented on May 5, 2022

    @kai3341

    Have similar issue:

    from typing import Type
    
    class A: ...
    class SomeMixin: ...
    class some_framework_app: ...
    
    def subclass_a(something):
        class A1(A):
            attr = something
    
        return A1
    
    
    class B(some_framework_app):
        C: Type[A]
        def __init__(self, *args, **kwargs):
            super().__init__(*args, **kwargs)
            self.C = subclass_a(self)
    
    app = B()
    
    class D(app.C, SomeMixin): ...  # <=== Name "app.C " is not defined
    
  12. davidism commented on Sep 13, 2022

    @davidism

    I'm currently adding annotations to Flask-SQLAlchemy. If this is not supported, I will never be able to enable type checking, as it breaks one of the major features of Flask-SQLAlchemy. If I do enable it, every project would have to add an ignore rule for name-defined to every model, or to their config, which is not ideal.

    The extension creates a self.Model class that is used to register SQLAlchemy models with the extension instance. However, due to this issue, mypy shows an error for class User(db.Model).

    Here's a minimal example without any SQLAlchemy-specific code:

    import typing as t
    
    class Example:
        Model: t.Type[object]
    
        def __init__(self):
            self.Model = object
    
    db = Example()
    reveal_type(db.Model)
    
    class User(db.Model):
        pass
    $ mypy --show-error-codes example.py
    example.py:12: note: Revealed type is "Type[builtins.object]"
    example.py:14: error: Name "db.Model" is not defined  [name-defined]
    

    I don't understand why this won't be supported. Mypy already understands that the name is a Type, it should be possible to inherit from it.

  13. jace commented on Nov 4, 2022

    @jace

    Flask-SQLAlchemy has blown up for me after the 3.0 release. As I can see from pallets-eco/flask-sqlalchemy#1118, the fix is to litter my code with # type: ignore comments. This is an unhappy state.

  14. 3 remaining items

  15. marcelm commented on Mar 9, 2023

    @marcelm

    (via python/typeshed#9860)

    Here’s an example of a seemingly innocuous usage of the multiprocessing module that triggers this error:

    import multiprocessing
    
    context = multiprocessing.get_context()
    
    class MyProcess(context.Process):  # error: Name "context.Process" is not defined  [name-defined].
        pass

    It would be great to hear why the restriction is in place. Is this just hard to solve technically or would it cause other issues were it allowed?

  16. added 2 commits that reference this issue on Mar 17, 2023
  17. BackSeat commented on Aug 5, 2023

    @BackSeat

    @jace above expresses eloquently the frustration a lot of us share.

    Mypy and Flask-SQLAlchemy are both popular packages. Would it be possible for the teams from each to talk to each other and find a better way forwards than either dropping type ignore everywhere or re-implementing the functionality offered by Flask-SQLAlchemy?

  18. davidism commented on Aug 5, 2023

    @davidism

    Happy to review a PR to Flask-SQLAlchemy that fixes the issue while retaining compatibility with its existing interface. But there's nothing more to do on my end than what I've already commented here. Note that even if MyPy fixes it, you have to separately convince pyright (vscode) to fix it, and they've already declined.

  19. jace commented on Aug 5, 2023

    @jace

    I've replaced db.Model with a custom base class and have full typing support now. It supports __bind_key__ too, but I chose to not implement the automatic __tablename__ construction as it felt a bit magical.

  20. BackSeat commented on Aug 5, 2023

    @BackSeat

    That looks very interesting @jace, thank you. I will look into migrating to your solution.

  21. jace commented on Aug 8, 2023

    @jace

    @davidism I'm sorry this is not drop-in compatible with Flask-SQLAlchemy or I'd have made a PR. I had to move all namespacing and base class config out of the SQLAlchemy instance to get typing to work, and there's a somewhat ugly two-line init to get Flask-SQLAlchemy's session management. My typing-fu only goes so far.

    At best, I can think of a cleaner but backward-incompatible integration.

  22. BackSeat commented on Aug 8, 2023

    @BackSeat

    This has been helpful discussion - thanks in particular to @davidism and @jace.

    I think Flask-SQLAlchemy is a great extension for proof of concept code and for those less experienced with Flask and/or SQLAlchemy. As a project grows and the team become more experienced, tools such as mypy become more important and valuable. At some point the value of mypy takes precedent over the convenience of wrappers such as Flask-SQLAlchemy, particularly such wrappers don't sit well with mypy.

    For now, we've adapted an approach outlined in this post, seemingly (and worryingly) only available on Wayback Machine. The approach is to define a declarative base outside of Flask-SQLAlchemy and then pass that to the extension, which not only avoids the mypy problems but also makes the declarative base available independently of Flask which, as it happens, is also helpful for us.

    Some code changes were needed from those given in the post referenced above, and I'm happy to make them available on request.

    For future projects, I suspect we'll choose not to use Flask-SQLAlchemy and just code SQLAlchemy access natively as documented on the Flask pages.

    If Flask-SQLAlchemy were to take the approach of using a predefined declarative base then I suspect that would increase the utility of that extension. However, that would be backward incompatible and may not align with the future goals of Flask-SQLAlchemy.

  23. davidism commented on Aug 8, 2023

    @davidism

    The reason I keep voting these comments down is because they're orthogonal to this issue and don't help fix the problem in MyPy or in Flask-SQLAlchemy. And it really, really sucks to be a maintainer that has poured countless hours into it to then be told "Flask-SQLAlchemy isn't good because it doesn't work with typing in this one case", or "Just rip out Flask-SQLAlchemy and replace it", or "I'm going to tell everyone not to use Flask-SQLAlchemy", or "Flask-SQLalchemy is only good for proofs of concept" etc. It really, really sucks. I am not happy with the fact that I keep hearing these things just because I need to watch this issue for actual resolutions to the issue.

    I'd suggest not replying along these lines further, it's off topic here, sorry MyPy maintainers. But I couldn't remain silent in the face of being told my work isn't good over and over again, especially after being completely open to fixing the issue. And if you're response is "that wasn't my intention" it doesn't matter, that's how it came off anyway.

  24. FossenWang commented on Feb 6, 2024

    @FossenWang

    The db.Model is created dynamically for some reason, but Mypy need static type. I don't think it's either side's fault.
    I like Flask-SQLAlchemy. The dynamic feature of python is definitely one of features that I much like. I don't want to sacrifice dynamic capability for static type.
    I don't expect Mypy to support all popular dynamic patterns, but can we provide more actual use cases for those dynamic patterns?

    Here is an example for Flask-SQLAlchemy, which works for me, but I'm just not sure if it's good practice:

    from typing import TYPE_CHECKING
    from flask_sqlalchemy import SQLAlchemy
    
    db = SQLAlchemy()
    
    if TYPE_CHECKING:
        from flask_sqlalchemy.model import Model
    else:
        Model = db.Model
    
    
    class ExampleModel(Model):
        pass
    
    
    reveal_type(ExampleModel)
    reveal_type(ExampleModel.query)
    
    # note: Revealed type is "def () -> app.graphql.base.ExampleModel"
    # note: Revealed type is "flask_sqlalchemy.query.Query"
  25. henri-hulski commented on Oct 16, 2024

    @henri-hulski

    Just writing the stub files for PonyORM. Actually I got the same error. In PonyORM all database models are subclasses from db.Entity which is an attribute of the Database class.
    Similar as in the Issue description but using a metaclass:

    class EntityMeta(type):
        pass
    
    class Entity(metaclass=EntityMeta):
        pass
    
    class Database:
        def __init__(self):
            self.Entity = type.__new__(EntityMeta, 'Entity', (Entity,), {})
            self.Entity._database_ = self
    
    db = Database()
    
    class ExampleModel(db.Entity):
        pass

    And I get the MyPy error:

    error: Name "db.Entity" is not defined  [name-defined]
    

    I tried to add the Entity as an instance attribute to core.pyi, but it doesn't help:

    class Database:
        Entity: EntityMeta  # or Entity: type[Entity]
        def __init__(self, *args, **kwargs) -> None: ...
  26. added a commit that references this issue on Jun 10, 2025
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions