WebIOPi Not working on pi 3

[richinixon]

Hello,

I tried installing webiopi for my RaspberryPi 3, unfortunately its not working.

Please find the below link from which i installed the WebIOPi,
$ wget http://sourceforge.net/projects/webiopi/files/WebIOPi-0.7.1.tar.gz
$ tar xvzf WebIOPi-0.7.1.tar.gz
$ cd WebIOPi-0.7.1
$ wget https://raw.githubusercontent.com/doublebind/raspi/master/webiopi-pi2bplus.patch
$ patch -p1 -i webiopi-pi2bplus.patch
$ sudo ./setup.sh

How to Start WebIOPi

Follow the steps below if Raspbian is installed by NOOBS later than 1.4.2.
$ cd /etc/systemd/system/
$ sudo wget https://raw.githubusercontent.com/doublebind/raspi/master/webiopi.service
$ sudo systemctl start webiopi
$ sudo systemctl enable webiopi.

And also find the screenshot of the error message and in browser the GPIO pins are not working.

Awaiting for your valuable inputs.

Kind Regards,
Richi Nixon V

[youngday]

It worked after add board information of Pi3.

[gpiermattei]

how can I add the board information of Pi3? thanks...

[youngday]

1, webiopi3/python/native/cpuinfo.c line 44
2, webiopi3/python/native/gpio.c line 38 line 39

[luz0928]

I saw my Pi 3's information with cat /proc/cpuinfo and I got this:

Then, I entered to cd WebIOPi-0.7.1/python/native/ and opened cpuinfo.c. According to the previous image, my Pi's hardware is BCM2709, and I saw this on that file:

What should I change? because according to this is okay, but is not working.

[varnav]

I did everything as instructed, but I was getting same "global name 'GPIO' is not defined" error.
This helped:
sudo apt-get install rpi.gpio

and then I reran setup and everything started to work.