Skip to content

Releases

PokeTokenBar for Windows v0.30.1

Choose a tag to compare

@Strongorange Strongorange released this 16 Nov 04:28

PokeTokenBar for Windows v0.30.1

v0.30.1 — Software rendering

  • The app now draws with WPF's software renderer. Hardware rendering made
    the graphics driver hold memory of its own: about 30 MB more with only
    the companion on screen and about 50 MB more with the dashboard and the
    Pokédex open. CPU use can rise slightly while the dashboard is open.

Install

  1. Download PokeTokenBar-0.30.1-win-x64.zip below and unzip it anywhere.
  2. Run PokeTokenBar.exe. State lives under %LOCALAPPDATA%\PokeTokenBar;
    unzipping or deleting the exe never touches your save.

Upgrading from an earlier version: replace the old files (or unzip to a new
folder) and launch — the save, settings and sprite cache are picked up
automatically.

PokeTokenBar for Windows v0.30.0

Choose a tag to compare

@Strongorange Strongorange released this 16 Nov 03:30

PokeTokenBar for Windows v0.30.0

v0.30.0 — Usage scanning runs outside the app

  • On every refresh the app starts a short-lived copy of itself
    (PokeTokenBar.exe --scan) that reads the usage logs and prints only the
    totals. The app process now stays around 170–180 MB instead of 500 MB or
    more; the scan process runs for a few seconds every five minutes and
    exits. If the scan process fails, that refresh runs inside the app as
    before.
  • Providers hand over per-day totals instead of every usage entry, and the
    app compacts its memory after each refresh.
  • Fixed: requesting a refresh right after one finished could return the
    finished result instead of starting a new refresh.
  • During a refresh, Task Manager briefly shows two PokeTokenBar processes.

Install

  1. Download PokeTokenBar-0.30.0-win-x64.zip below and unzip it anywhere.
  2. Run PokeTokenBar.exe. State lives under %LOCALAPPDATA%\PokeTokenBar;
    unzipping or deleting the exe never touches your save.

Upgrading from an earlier version: replace the old files (or unzip to a new
folder) and launch — the save, settings and sprite cache are picked up
automatically.

PokeTokenBar for Windows v0.29.1

Choose a tag to compare

@Strongorange Strongorange released this 16 Nov 02:22

PokeTokenBar for Windows v0.29.1

v0.29.1 — Lower memory use

  • Usage logs are no longer read into memory whole. Claude Code and Codex
    logs are read line by line, lines without usage are skipped before they
    are decoded, and an active session is read from where the previous
    refresh stopped. On a machine with about 7 GB of logs, memory after
    startup dropped from about 1.4 GB to about 340 MB, and a 200 MB session
    no longer costs over 1 GB on every refresh.
  • The usage cache is read and written as a stream instead of one large
    string.
  • The first launch after upgrading rebuilds the usage cache by reading
    every log again, so the first refresh takes longer than usual (about
    40 seconds for 7 GB of logs on the test machine).

Install

  1. Download PokeTokenBar-0.29.1-win-x64.zip below and unzip it anywhere.
  2. Run PokeTokenBar.exe. State lives under %LOCALAPPDATA%\PokeTokenBar;
    unzipping or deleting the exe never touches your save.

Upgrading from an earlier version: replace the old files (or unzip to a new
folder) and launch — the save, settings and sprite cache are picked up
automatically.

PokeTokenBar for Windows v0.29.0

Choose a tag to compare

@Strongorange Strongorange released this 22 Oct 04:47

PokeTokenBar for Windows v0.29.0

v0.29.0 — Floating companion in the dex

  • Opening the Pokédex now finds your floating companion for you. The tile
    of the species currently on your desktop — the representative when one
    is pinned, otherwise the companion you are raising — gets a soft accent
    background, and the grid scrolls that tile into the middle of the view.
    Entering the dex tab, "Choose in Pokédex…" from settings and coming
    back from the catch log all land on it; the tile's tooltip says why it
    is tinted. A lone floating egg has no dex row, so nothing is
    highlighted.

Install

  1. Download PokeTokenBar-0.29.0-win-x64.zip below and unzip it anywhere.
  2. Run PokeTokenBar.exe. State lives under %LOCALAPPDATA%\PokeTokenBar;
    unzipping or deleting the exe never touches your save.

Upgrading from an earlier version: replace the old files (or unzip to a new
folder) and launch — the save, settings and sprite cache are picked up
automatically.

PokeTokenBar for Windows v0.28.0

Choose a tag to compare

@Strongorange Strongorange released this 20 Oct 06:51

PokeTokenBar for Windows v0.28.0

v0.28.0 — Korean particles, type badges, shiny odds

  • Korean copy now picks the right particle automatically: hatch, shiny
    hatch, evolution, level-up status, egg-swap confirmations and mint
    feedback append 을/를, 이/가 and (으)로 by the name's final consonant
    (a ㄹ coda takes 로), so "유니란이(가)" reads "유니란이". Names the app
    can't measure (Unown markers, pre-load "chattymin#123", Latin names) keep the
    parenthesized dual form — a wrong particle is worse than a
    parenthetical.
  • Type badges with the classic type-chart colors: the companion home
    card and the species detail header show one colored capsule per type
    (localized label, white text). Types outside the 18 (stellar, shadow)
    render as neutral gray instead of a guessed tint. The plain
    "Grass/Poison" text segment left the home info line — the badge row
    directly above shows the types now.
  • The shiny hatch notification reports the odds it actually rolled:
    1/48 with a Shiny Charm owned, 1/64 without, in all seven languages.
  • Fixed: mint feedback showed the raw English nature name ("Jolly") in
    every language; it now uses the localized nature name.

Install

  1. Download PokeTokenBar-0.28.0-win-x64.zip below and unzip it anywhere.
  2. Run PokeTokenBar.exe. State lives under %LOCALAPPDATA%\PokeTokenBar;
    unzipping or deleting the exe never touches your save.

Upgrading from an earlier version: replace the old files (or unzip to a new
folder) and launch — the save, settings and sprite cache are picked up
automatically.

PokeTokenBar for Windows v0.27.0

Choose a tag to compare

@Strongorange Strongorange released this 19 Oct 07:55

PokeTokenBar for Windows v0.27.0

v0.27.0 — Forms, usage recap, backups

  • Collectible alternate forms for every generation 1-5 species with an
    animated sprite — Unown's letters generalized to Castform, Deoxys,
    Burmy/Wormadam, Cherrim, Shellos/Gastrodon, Rotom, Giratina, Shaymin,
    Arceus, Basculin, Darmanitan, Deerling/Sawsbuck, the forces of nature,
    Kyurem, Keldeo, Meloetta and Genesect. The form is drawn once per line
    at hatch, resolved per species, shown in the Pokédex detail picker and
    kept by the representative; saves still read the old Unown keys.

  • Usage recap opens from the usage tab: one calendar week, month or year
    at a time with day meters (exact tokens on hover — a real zero reads
    differently from "no data"), the change against the same days of the
    previous period, best day, active days, best streak and the Pokémon
    graduated in that period. Rendered as a Pokédex-style LCD card; a
    rolling local ledger keeps day totals across months so history
    survives log rotation and the 1st of the month.

  • The Pokédex and catch log gained search (names in any stored language
    plus number), sorting (number/name/rarity, newest first for the log)
    and a shiny-only filter; empty results offer a one-click reset.

  • Automatic local backups: a snapshot of your save is taken every 12
    hours (keeping the newest ten) and a state file that no longer decodes
    is moved aside and recovered from the newest snapshot on the next
    launch. Settings gains a backup section with create/restore and a
    history that starts collapsed.

  • OpenCode v2 support: assistant usage written to the session_message
    projection is now read alongside the v1 message table, so upgrading
    OpenCode no longer drops its usage to zero.

  • Fixed: the update checker's 30-minute cooldown now records only a
    validated release — a failed fetch, unsafe URL or prerelease tag no
    longer blocks the next attempt.

  • Fixed: compact token units promote at rounding boundaries (999,950
    shows as 1M, not 1000K) and percent/cost tiers are picked from the
    rounded value (79.96% reads as 80%, $99.96 as $100).

Install

  1. Download PokeTokenBar-0.27.0-win-x64.zip below and unzip it anywhere.
  2. Run PokeTokenBar.exe. State lives under %LOCALAPPDATA%\PokeTokenBar;
    unzipping or deleting the exe never touches your save.

Upgrading from an earlier version: replace the old files (or unzip to a new
folder) and launch — the save, settings and sprite cache are picked up
automatically.

v0.26.1 — 플로팅 펫 렌더 자가복구

Choose a tag to compare

@Strongorange Strongorange released this 13 Oct 08:00

PokeTokenBar for Windows v0.26.1

v0.26.1 — 플로팅 펫 렌더 자가복구

  • 고정: 알이 부화하거나 포켓몬이 진화한 직후 애니메이션 스프라이트
    로드가 실패하면 플로팅 펫이 앱을 다시 시작하기 전까지 영구히 안
    보일 수 있었습니다 — 실패한 로드는 재시도 없이 투명 창을 빈 채로
    남겼습니다. 이제 로드에 실패하면 캐시된 정적 스프라이트로 자동
    되돌아가고, 트레이에서 펫을 끄고 다시 켜면 항상 전체 재렌더로
    수동 복구됩니다.

설치

  1. 아래 PokeTokenBar-0.26.1-win-x64.zip를 내려받아 아무 곳에나
    압축을 풉니다.
  2. PokeTokenBar.exe를 실행합니다. 상태는
    %LOCALAPPDATA%\PokeTokenBar에 저장됩니다. exe를 압축 해제하거나
    지워도 저장 데이터에는 영향이 없습니다.

이전 버전에서 업그레이드: 기존 파일을 교체하거나(또는 새 폴더에 압축을
풀어) 실행하면 저장 데이터, 설정, 스프라이트 캐시를 자동으로 이어
받습니다.


PokeTokenBar for Windows v0.26.1

v0.26.1 — Floating pet render self-heal

  • Fixed: the floating pet could turn permanently invisible when an
    animated sprite failed to load right after a hatch or evolution — the
    failed load left the transparent window blank with no retry, so the
    pet stayed hidden until the app was restarted. A failed animated load
    now falls back to the cached static sprite automatically, and toggling
    the pet off and on from the tray always re-renders it as a manual
    recovery path.

Install

  1. Download PokeTokenBar-0.26.1-win-x64.zip below and unzip it anywhere.
  2. Run PokeTokenBar.exe. State lives under %LOCALAPPDATA%\PokeTokenBar;
    unzipping or deleting the exe never touches your save.

Upgrading from an earlier version: replace the old files (or unzip to a new
folder) and launch — the save, settings and sprite cache are picked up
automatically.

v0.26.0 — 연간 히트맵 · 비용 추정

Choose a tag to compare

@Strongorange Strongorange released this 02 Oct 03:13

PokeTokenBar for Windows v0.26.0

v0.26.0 — 연간 히트맵 · 비용 추정

  • 사용량 탭에 1년치 사용량 히트맵이 생겼습니다. 하루가 한 칸인 GitHub
    잔디밭 스타일이라 1년의 사용 패턴이 한눈에 들어오고, 가로로 스크롤해
    전체 기간을 살펴볼 수 있습니다.
  • 프로바이더 메뉴에서 Codex와 OpenCode 사용량에도 달러 비용 추정치가
    표시됩니다. Claude Code만 보이던 비용을 이제 세 프로바이더 모두에서
    볼 수 있습니다. 요금 기준은 커뮤니티 카탈로그(models.dev)에서 하루에
    한 번 자동으로 갱신하고, 인터넷이 연결되지 않아도 내장 요금표로 계산을
    이어 갑니다.
  • 고정: 상점과 가방의 구매·사용 버튼이 카드 줄 전체로 늘어나 보이던
    문제를 고쳤습니다.
  • 고정: 상점 알 카드에 실제 알 그림이 표시됩니다. 이전에는 검은색
    이모지 글자로 대체되어 있었습니다.
  • 고정: 프로바이더 카드에서 달러 비용과 토큰 수가 서로 붙어 한 덩어리로
    읽히고 줄이 어긋나 보이던 문제를 고쳤습니다.

설치

  1. 아래 PokeTokenBar-0.26.0-win-x64.zip를 내려받아 아무 곳에나
    압축을 풉니다.
  2. PokeTokenBar.exe를 실행합니다. 상태는
    %LOCALAPPDATA%\PokeTokenBar에 저장됩니다. exe를 압축 해제하거나
    지워도 저장 데이터에는 영향이 없습니다.

이전 버전에서 업그레이드: 기존 파일을 교체하거나(또는 새 폴더에 압축을
풀어) 실행하면 저장 데이터, 설정, 스프라이트 캐시를 자동으로 이어
받습니다.


PokeTokenBar for Windows v0.26.0

v0.26.0 — Year heatmap & cost estimates

  • The usage tab now has a year-long heatmap. Each day is one GitHub-style
    cell, so a full year of usage patterns is visible at a glance, and the
    view scrolls horizontally to cover the whole period.
  • The provider menu now shows estimated dollar costs for Codex and OpenCode
    usage, not just Claude Code. Rates come from the community models.dev
    catalog, refreshed automatically once a day; without internet the bundled
    rate table keeps the estimates working.
  • Fixed: shop and bag buy/use buttons no longer stretch across the whole
    card row.
  • Fixed: shop egg cards now show the real egg sprite instead of a dark
    fallback emoji glyph.
  • Fixed: in provider cards the dollar cost and the token count used to sit
    flush together as one blob on slightly different baselines; they now share
    one baseline with proper spacing.

Install

  1. Download PokeTokenBar-0.26.0-win-x64.zip below and unzip it anywhere.
  2. Run PokeTokenBar.exe. State lives under %LOCALAPPDATA%\PokeTokenBar;
    unzipping or deleting the exe never touches your save.

Upgrading from an earlier version: replace the old files (or unzip to a new
folder) and launch — the save, settings and sprite cache are picked up
automatically.

v0.25.4 — Quick representative selection

Choose a tag to compare

@Strongorange Strongorange released this 01 Oct 01:00

PokeTokenBar for Windows v0.25.4

v0.25.4 — Quick representative selection

  • Choosing a representative no longer requires the detail window. Right-click
    a dex tile to set or clear the representative directly, or click a tile and
    use the labeled action button in the new footer selection bar, which also
    shows the selected species' rarity. Unown tiles open the form picker first.
  • The representative action is now a labeled accent button — in the dex
    footer and in the species detail window — instead of a small icon-only
    star, so the flow is visible without prior knowledge.
  • Fixed: the settings window's representative row clipped its buttons at the
    fixed window width.
  • Fixed: "Choose in Pokédex…" opened the dashboard behind the settings
    window; the settings window now steps aside while the dex is in front.

Install

  1. Download PokeTokenBar-0.25.4-win-x64.zip below and unzip it anywhere.
  2. Run PokeTokenBar.exe. State lives under %LOCALAPPDATA%\PokeTokenBar;
    unzipping or deleting the exe never touches your save.

Upgrading from an earlier version: replace the old files (or unzip to a new
folder) and launch — the save, settings and sprite cache are picked up
automatically.


PokeTokenBar for Windows v0.25.4

v0.25.4 — 도감에서 바로 대표 지정

  • 대표 포켓몬을 상세 창 없이도 고를 수 있습니다. 도감 칸을 우클릭하면
    바로 대표로 지정하거나 해제하고, 칸을 클릭하면 새로 생긴 하단 선택
    줄의 라벨 붙은 버튼으로 지정할 수 있습니다(선택한 종의 희귀도도 함께
    보여 줍니다). 안농은 먼저 글자를 고르는 상세 창으로 안내합니다.
  • 대표 지정 액션이 작은 별 아이콘 대신 라벨이 붙은 강조 버튼으로
    바뀝니다(도감 하단·포켓몬 상세 창 모두) — 흐름을 미리 알지 못해도
    눈에 보입니다.
  • 수정: 설정 창의 대표 포켓몬 행이 고정 폭을 넘어 버튼이 잘리던
    문제를 고쳤습니다.
  • 수정: "도감에서 선택…"을 눌러도 대시보드가 설정 창 뒤에 머물던
    문제를 고쳤습니다. 이제 설정 창이 도감 앞에서는 비켜 있습니다.

설치

  1. 아래 PokeTokenBar-0.25.4-win-x64.zip를 내려받아 아무 곳에나
    압축을 풉니다.
  2. PokeTokenBar.exe를 실행합니다. 상태는
    %LOCALAPPDATA%\PokeTokenBar에 저장됩니다. exe를 압축 해제하거나
    지워도 저장 데이터에는 영향이 없습니다.

이전 버전에서 업그레이드: 기존 파일을 교체하거나(또는 새 폴더에 압축을
풀어) 실행하면 저장 데이터, 설정, 스프라이트 캐시를 자동으로 이어
받습니다.

v0.25.3

Choose a tag to compare

@Strongorange Strongorange released this 30 Sep 23:39

v0.25.3 — 사용량 갱신 락 수정

  • 수정: Codex 세션이 실행 중이면 모든 프로바이더의 사용량이 갱신되지 않던 문제 수정

v0.25.3 — Usage refresh lock fix

  • Fixed: usage numbers stopped updating for every provider while a Codex
    session