Mistral vibe

.trae/skills/openspec-apply-change/SKILL.md

@@ -0,0 +1,156 @@
+---
+name: openspec-apply-change
+description: Implement tasks from an OpenSpec change. Use when the user wants to start implementing, continue implementation, or work through tasks.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.2.0"
+---
+
+Implement tasks from an OpenSpec change.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and use the **AskUserQuestion tool** to let the user select
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:apply <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - Context file paths (varies by schema - could be proposal/specs/design/tasks or spec/tests/implementation/docs)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using openspec-continue-change
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+4. **Read context files**
+
+   Read the files listed in `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! Ready to archive this change.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

.trae/skills/openspec-archive-change/SKILL.md

@@ -0,0 +1,114 @@
+---
+name: openspec-archive-change
+description: Archive a completed change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.2.0"
+---
+
+Archive a completed change in the experimental workflow.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **If no change name provided, prompt for selection**
+
+   Run `openspec list --json` to get available changes. Use the **AskUserQuestion tool** to let the user select.
+
+   Show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   **IMPORTANT**: Do NOT guess or auto-select a change. Always let the user choose.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `artifacts`: List of artifacts with their status (`done` or other)
+
+   **If any artifacts are not `done`:**
+   - Display warning listing incomplete artifacts
+   - Use **AskUserQuestion tool** to confirm user wants to proceed
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Use **AskUserQuestion tool** to confirm user wants to proceed
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Check for delta specs at `openspec/changes/<name>/specs/`. If none exist, proceed without sync prompt.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `openspec/specs/<capability>/spec.md`
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   If user chooses sync, use Task tool (subagent_type: "general-purpose", prompt: "Use Skill tool to invoke openspec-sync-specs for change '<name>'. Delta spec analysis: <include the analyzed delta spec summary>"). Proceed to archive regardless of choice.
+
+5. **Perform the archive**
+
+   Create the archive directory if it doesn't exist:
+   ```bash
+   mkdir -p openspec/changes/archive
+   ```
+
+   Generate target name using current date: `YYYY-MM-DD-<change-name>`
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move the change directory to archive
+
+   ```bash
+   mv openspec/changes/<name> openspec/changes/archive/YYYY-MM-DD-<name>
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Whether specs were synced (if applicable)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** openspec/changes/archive/YYYY-MM-DD-<name>/
+**Specs:** ✓ Synced to main specs (or "No delta specs" or "Sync skipped")
+
+All artifacts complete. All tasks complete.
+```
+
+**Guardrails**
+- Always prompt for change selection if not provided
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, use openspec-sync-specs approach (agent-driven)
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting

.trae/skills/openspec-continue-change/SKILL.md

@@ -0,0 +1,118 @@
+---
+name: openspec-continue-change
+description: Continue working on an OpenSpec change by creating the next artifact. Use when the user wants to progress their change, create the next artifact, or continue their workflow.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.2.0"
+---
+
+Continue working on a change by creating the next artifact.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **If no change name provided, prompt for selection**
+
+   Run `openspec list --json` to get available changes sorted by most recently modified. Then use the **AskUserQuestion tool** to let the user select which change to work on.
+
+   Present the top 3-4 most recently modified changes as options, showing:
+   - Change name
+   - Schema (from `schema` field if present, otherwise "spec-driven")
+   - Status (e.g., "0/5 tasks", "complete", "no tasks")
+   - How recently it was modified (from `lastModified` field)
+
+   Mark the most recently modified change as "(Recommended)" since it's likely what the user wants to continue.
+
+   **IMPORTANT**: Do NOT guess or auto-select a change. Always let the user choose.
+
+2. **Check current status**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand current state. The response includes:
+   - `schemaName`: The workflow schema being used (e.g., "spec-driven")
+   - `artifacts`: Array of artifacts with their status ("done", "ready", "blocked")
+   - `isComplete`: Boolean indicating if all artifacts are complete
+
+3. **Act based on status**:
+
+   ---
+
+   **If all artifacts are complete (`isComplete: true`)**:
+   - Congratulate the user
+   - Show final status including the schema used
+   - Suggest: "All artifacts created! You can now implement this change or archive it."
+   - STOP
+
+   ---
+
+   **If artifacts are ready to create** (status shows artifacts with `status: "ready"`):
+   - Pick the FIRST artifact with `status: "ready"` from the status output
+   - Get its instructions:
+     ```bash
+     openspec instructions <artifact-id> --change "<name>" --json
+     ```
+   - Parse the JSON. The key fields are:
+     - `context`: Project background (constraints for you - do NOT include in output)
+     - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
+     - `template`: The structure to use for your output file
+     - `instruction`: Schema-specific guidance
+     - `outputPath`: Where to write the artifact
+     - `dependencies`: Completed artifacts to read for context
+   - **Create the artifact file**:
+     - Read any completed dependency files for context
+     - Use `template` as the structure - fill in its sections
+     - Apply `context` and `rules` as constraints when writing - but do NOT copy them into the file
+     - Write to the output path specified in instructions
+   - Show what was created and what's now unlocked
+   - STOP after creating ONE artifact
+
+   ---
+
+   **If no artifacts are ready (all blocked)**:
+   - This shouldn't happen with a valid schema
+   - Show status and suggest checking for issues
+
+4. **After creating an artifact, show progress**
+   ```bash
+   openspec status --change "<name>"
+   ```
+
+**Output**
+
+After each invocation, show:
+- Which artifact was created
+- Schema workflow being used
+- Current progress (N/M complete)
+- What artifacts are now unlocked
+- Prompt: "Want to continue? Just ask me to continue or tell me what to do next."
+
+**Artifact Creation Guidelines**
+
+The artifact types and their purpose depend on the schema. Use the `instruction` field from the instructions output to understand what to create.
+
+Common artifact patterns:
+
+**spec-driven schema** (proposal → specs → design → tasks):
+- **proposal.md**: Ask user about the change if not clear. Fill in Why, What Changes, Capabilities, Impact.
+  - The Capabilities section is critical - each capability listed will need a spec file.
+- **specs/<capability>/spec.md**: Create one spec per capability listed in the proposal's Capabilities section (use the capability name, not the change name).
+- **design.md**: Document technical decisions, architecture, and implementation approach.
+- **tasks.md**: Break down implementation into checkboxed tasks.
+
+For other schemas, follow the `instruction` field from the CLI output.
+
+**Guardrails**
+- Create ONE artifact per invocation
+- Always read dependency artifacts before creating a new one
+- Never skip artifacts or create out of order
+- If context is unclear, ask the user before creating
+- Verify the artifact file exists after writing before marking progress
+- Use the schema's artifact sequence, don't assume specific artifact names
+- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
+  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
+  - These guide what you write, but should never appear in the output