Revise plotter web interface instructions

Updated instructions for using the web interface 'saxi' with the plotter, including new steps and hardware settings.

Author: SimonVanherweghe

src/content/docs/plotter/01-webinterface.md

@@ -3,15 +3,18 @@ title: Web interface
 description: A guide to the plotter.
 ---
 
-The most easy way to get a vector file plotted is to use the web interface 'saxi'. You could install this on your own machine and connect the plotter via USB to your computer. But we've provided a Raspberry Pi which is connected to the plotter, has Saxi installed and has its own network.
+The most easy way to get a vector file plotted is to use the web interface 'saxi'. You could install this on your own machine and connect the plotter via USB to your computer. But we've provided a Raspberry Pi which is connected to the plotter, has Saxi installed and is available on the eduroan-2.4 WiFi.
 
 ## Steps
 
-1. Connect to the `eduroam-2.4` wifi network
-2. Open a browser and go to <http://harryplotter.technet.howest.be:9080/>
-3. Drag your SVG file on te canvas
-4. Adjust settings if needed
-5. Align the paper, fix it in place with some magnets (check if they aren't in the path of the plotter)
-6. Click the 'pen up' button, the penclip should be raised up then.
-7. Mount the pen, make sure its point is hovering a couple of millimeters above the paper
-8. Plot!
+1. Switch the 'Motor Power' on
+2. Connect to the `eduroam-2.4` wifi network
+3. Open a browser and go to <http://harryplotter.technet.howest.be:9080/>
+4. Drag your SVG file on te canvas
+5. Set hardware to 'AxiDraw V3 Brushless'
+6. Adjust settings if needed
+7. Align the paper, fix it in place with some magnets (check if they aren't in the path of the plotter)
+8. Click the 'pen up' button, the penclip should be raised up then.
+9. Mount the pen, make sure its point is hovering a couple of millimeters above the paper
+10. Plot!
+11. Switch the 'Motor Power' off when done