diff --git a/docs/onboarding/error-tracking/react-native.tsx b/docs/onboarding/error-tracking/react-native.tsx
index 6951b1ee20ba..cbce3714adcc 100644
--- a/docs/onboarding/error-tracking/react-native.tsx
+++ b/docs/onboarding/error-tracking/react-native.tsx
@@ -64,7 +64,7 @@ export const getReactNativeSteps = (ctx: OnboardingComponentsContext): StepDefin
                         {dedent`
                             \`nativeCrashes\` captures native iOS and Android crashes that the JavaScript layer can't see. Beyond the config above, it needs:
 
-                            1. The optional native plugin installed — \`npx expo install @posthog/react-native-plugin@2\` (Expo) or \`npm i @posthog/react-native-plugin@2\` (bare React Native). If it's missing, native capture is a no-op and your JS-level autocapture is unaffected.
+                            1. The optional native plugin installed — \`npx expo install @posthog/react-native-plugin@3\` (Expo) or \`npm i @posthog/react-native-plugin@3\` (bare React Native). Plugin 3.0 requires React Native 0.75+, iOS 15+, and Xcode 26+. If it's missing, native capture is a no-op and your JS-level autocapture is unaffected.
                             2. Your project's **Enable exception autocapture** setting enabled in [error tracking settings](https://app.posthog.com/settings/project-error-tracking#exception-autocapture) — the same server-side setting that gates JavaScript autocapture.
                             3. Native debug symbols uploaded at build time, so crash stack traces are readable. See [native crash symbolication](https://posthog.com/docs/error-tracking/upload-source-maps/react-native#native-crash-symbolication).
                         `}
diff --git a/docs/onboarding/session-replay/kmp.tsx b/docs/onboarding/session-replay/kmp.tsx
index dd508079e24e..b1f5c5cbc1ee 100644
--- a/docs/onboarding/session-replay/kmp.tsx
+++ b/docs/onboarding/session-replay/kmp.tsx
@@ -34,12 +34,12 @@ export const getKMPSteps = (ctx: OnboardingComponentsContext): StepDefinition[]
                         `0.+` resolves to the latest `0.x` release. The SDK is a pre-release, so the API can change
                         between minor versions – pin an exact version from [Maven
                         Central](https://central.sonatype.com/artifact/com.posthog/posthog-kmp) if you would rather
-                        upgrade deliberately. The setup below requires `0.8.0` or higher.
+                        upgrade deliberately. The setup below requires `0.11.0` or higher.
                     </Markdown>
                     <CalloutBox type="fyi" title="Supported targets">
                         <Markdown>
                             Session replay is captured on Android, iOS and the web. It is ignored on the JVM (desktop)
-                            target.
+                            and macOS targets.
                         </Markdown>
                     </CalloutBox>
                 </>
@@ -97,16 +97,14 @@ export const getKMPSteps = (ctx: OnboardingComponentsContext): StepDefinition[]
                                             // Capture console and system logs (iOS and web). Default is false.
                                             captureLogs = false,
 
-                                            // Whether replays are created using high quality screenshots instead of
-                                            // wireframes (experimental, Android and iOS). Default is false.
-                                            // Screenshots may contain sensitive information, so use with caution.
-                                            screenshot = false,
-
                                             // Capture Android logcat output (Android only). Default is true.
                                             captureLogcat = true,
 
-                                            // Touch event debounce delay in milliseconds (Android only). Default is 1000.
-                                            debouncerDelayMs = 1000L,
+                                            // Minimum delay in milliseconds between replay snapshots (Android and iOS). Default is 1000.
+                                            throttleDelayMs = 1000L,
+
+                                            // Experimental: verify screenshot mask alignment before keeping a capture (Android only). Default is false.
+                                            verifyScreenshotMaskAlignment = false,
                                         ),
                                     )
                                 `,
diff --git a/docs/onboarding/session-replay/react-native.tsx b/docs/onboarding/session-replay/react-native.tsx
index e9ac28578164..adece72745af 100644
--- a/docs/onboarding/session-replay/react-native.tsx
+++ b/docs/onboarding/session-replay/react-native.tsx
@@ -21,14 +21,14 @@ export const getReactNativeSteps = (ctx: OnboardingComponentsContext): StepDefin
                                 language: 'bash',
                                 file: 'Expo',
                                 code: dedent`
-                                    npx expo install posthog-react-native@4 expo-file-system expo-application expo-device expo-localization @posthog/react-native-plugin@2
+                                    npx expo install posthog-react-native@4 expo-file-system expo-application expo-device expo-localization @posthog/react-native-plugin@3
                                 `,
                             },
                             {
                                 language: 'bash',
                                 file: 'yarn',
                                 code: dedent`
-                                    yarn add posthog-react-native@4 @react-native-async-storage/async-storage react-native-device-info react-native-localize @posthog/react-native-plugin@2
+                                    yarn add posthog-react-native@4 @react-native-async-storage/async-storage react-native-device-info react-native-localize @posthog/react-native-plugin@3
 
                                     # for iOS
                                     cd ios && pod install
@@ -38,7 +38,7 @@ export const getReactNativeSteps = (ctx: OnboardingComponentsContext): StepDefin
                                 language: 'bash',
                                 file: 'npm',
                                 code: dedent`
-                                    npm i -s posthog-react-native@4 @react-native-async-storage/async-storage react-native-device-info react-native-localize @posthog/react-native-plugin@2
+                                    npm i -s posthog-react-native@4 @react-native-async-storage/async-storage react-native-device-info react-native-localize @posthog/react-native-plugin@3
 
                                     # for iOS
                                     cd ios && pod install
@@ -49,7 +49,7 @@ export const getReactNativeSteps = (ctx: OnboardingComponentsContext): StepDefin
                     <CalloutBox type="fyi" title="Plugin renamed in 4.47.0+">
                         <Markdown>
                             {dedent`
-                                \`@posthog/react-native-plugin\` (\`>= 2.0.1\`) is the renamed \`posthog-react-native-session-replay\` plugin — it was renamed in \`posthog-react-native\` 4.47.0+ and now also powers [native error tracking](https://posthog.com/docs/error-tracking/installation/react-native). If you're on a \`posthog-react-native\` version earlier than 4.47.0, install \`posthog-react-native-session-replay\` instead.
+                                \`@posthog/react-native-plugin\` (\`>= 2.0.1\`) is the renamed \`posthog-react-native-session-replay\` plugin. It was renamed in \`posthog-react-native\` 4.47.0+ and now also powers [native error tracking](https://posthog.com/docs/error-tracking/installation/react-native). If you're on a \`posthog-react-native\` version earlier than 4.47.0, install \`posthog-react-native-session-replay\` instead. Don't install it alongside \`@posthog/react-native-plugin\` 3.0: its pod still installs \`posthog-ios\` 3.x, and the Xcode build fails with \`Redefinition of module 'PostHog'\`.
                             `}
                         </Markdown>
                     </CalloutBox>
@@ -170,8 +170,10 @@ export const getReactNativeSteps = (ctx: OnboardingComponentsContext): StepDefin
                     </Markdown>
                     <CalloutBox type="fyi" title="Requirements">
                         <Markdown>
-                            Requires Android API 26+ and iOS 13+. Expo Go is not supported - use a development build.
-                            Session replay is only supported on Android and iOS platforms.
+                            Requires React Native 0.75+, Android API 26+, iOS 15+, and Xcode 26+. On React Native 0.75
+                            and 0.76, including Expo SDK 52, Android builds also need Kotlin 2.0 or later. Expo Go is
+                            not supported - use a development build. Session replay is only supported on Android and iOS
+                            platforms.
                         </Markdown>
                     </CalloutBox>
                 </>
diff --git a/frontend/src/scenes/onboarding/sdks/sdk-install-instructions/index.tsx b/frontend/src/scenes/onboarding/sdks/sdk-install-instructions/index.tsx
index 45ffdf34a991..73891c9f62a1 100644
--- a/frontend/src/scenes/onboarding/sdks/sdk-install-instructions/index.tsx
+++ b/frontend/src/scenes/onboarding/sdks/sdk-install-instructions/index.tsx
@@ -14,7 +14,6 @@ export * from './nodejs'
 export * from './nuxt'
 export * from './php'
 export * from './python'
-export * from './react-native'
 export * from './remix'
 export * from './ruby'
 export * from './svelte'
diff --git a/frontend/src/scenes/onboarding/sdks/sdk-install-instructions/react-native.tsx b/frontend/src/scenes/onboarding/sdks/sdk-install-instructions/react-native.tsx
deleted file mode 100644
index f71cd0e24a8d..000000000000
--- a/frontend/src/scenes/onboarding/sdks/sdk-install-instructions/react-native.tsx
+++ /dev/null
@@ -1,154 +0,0 @@
-import { useValues } from 'kea'
-
-import { Link } from '@posthog/lemon-ui'
-
-import { CodeSnippet, Language } from 'lib/components/CodeSnippet'
-import { apiHostOrigin } from 'lib/utils/apiHost'
-import SetupWizardBanner from 'scenes/onboarding/shared/SetupWizardBanner'
-import { teamLogic } from 'scenes/teamLogic'
-
-export interface RNSetupProps {
-    hideWizard?: boolean
-    includeReplay?: boolean
-    includeSurveys?: boolean
-}
-
-function RNInstallSnippet({ includeReplay, includeSurveys }: RNSetupProps): JSX.Element {
-    return (
-        <CodeSnippet language={Language.Bash}>
-            {`# Expo apps
-npx expo install posthog-react-native expo-file-system expo-application expo-device expo-localization${
-                includeReplay ? ` posthog-react-native-session-replay` : ''
-            }${includeSurveys ? ` react-native-safe-area-context react-native-svg` : ''}
-
-# Standard React Native apps
-yarn add posthog-react-native @react-native-async-storage/async-storage react-native-device-info react-native-localize${
-                includeReplay ? ` posthog-react-native-session-replay` : ''
-            }${includeSurveys ? ` react-native-safe-area-context react-native-svg` : ''}
-# or
-npm i -s posthog-react-native @react-native-async-storage/async-storage react-native-device-info react-native-localize${
-                includeReplay ? ` posthog-react-native-session-replay` : ''
-            }${includeSurveys ? ` react-native-safe-area-context react-native-svg` : ''}
-
-# for iOS
-cd ios
-pod install`}
-        </CodeSnippet>
-    )
-}
-
-function RNSetupSnippet({ includeReplay }: RNSetupProps): JSX.Element {
-    const { currentTeam } = useValues(teamLogic)
-    const url = apiHostOrigin()
-
-    return (
-        <>
-            <p>
-                PostHog is most easily used via the <code>PostHogProvider</code> component but if you need to
-                instantiate it directly,{' '}
-                <Link to="https://posthog.com/docs/libraries/react-native#without-the-posthogprovider">
-                    check out the docs
-                </Link>{' '}
-                which explain how to do this correctly.
-            </p>
-            <CodeSnippet language={Language.JSX}>
-                {`// App.(js|ts)
-import { PostHogProvider } from 'posthog-react-native'
-...
-
-export function MyApp() {
-    return (
-        <PostHogProvider apiKey="${currentTeam?.api_token}" options={{
-            host: "${url}",
-            ${
-                includeReplay
-                    ? `
-            // check https://posthog.com/docs/session-replay/installation?tab=React+Native
-            // for more config and to learn about how we capture sessions on mobile
-            // and what to expect
-            enableSessionReplay: true,
-            sessionReplayConfig: {
-                // Whether text inputs are masked. Default is true.
-                // Password inputs are always masked regardless
-                maskAllTextInputs: true,
-                // Whether images are masked. Default is true.
-                maskAllImages: true,
-                // Capture logs automatically. Default is true.
-                // Android only (Native Logcat only)
-                //
-                // Support for remote configuration 
-                // in the [session replay settings](https://app.posthog.com/settings/project-replay#replay-log-capture)
-                // requires SDK version 4.35.0 or higher.
-                captureLog: true,
-                // Whether network requests are captured in recordings. Default is true
-                // Only metric-like data like speed, size, and response code are captured.
-                // No data is captured from the request or response body.
-                // iOS only
-                //
-                // Support for remote configuration 
-                // in the [session replay settings](https://app.posthog.com/settings/project-replay#replay-network)
-                // requires SDK version 4.35.0 or higher.
-                captureNetworkTelemetry: true,
-                // Throttling delay used to reduce the number of snapshots captured and reduce performance impact
-                // The lower the number more snapshots will be captured but higher the performance impact
-                // Default is 1000ms
-                throttleDelayMs: 1000,
-            },`
-                    : ''
-            }
-        }}>
-            <RestOfApp />
-        </PostHogProvider>
-    )
-}`}
-            </CodeSnippet>
-        </>
-    )
-}
-
-function RNSetupSurveysProvider(): JSX.Element {
-    return (
-        <>
-            <p>
-                Add PostHogSurveyProvider to your app anywhere inside PostHogProvider. This component fetches surveys.
-                It also acts as the root for where popover surveys are rendered.
-            </p>
-            <CodeSnippet language={Language.JSX}>
-                {`<PostHogProvider>
-    <PostHogSurveyProvider>{children}</PostHogSurveyProvider>
-</PostHogProvider>`}
-            </CodeSnippet>
-            <p>
-                If you're not using the PostHogProvider, add PostHogSurveyProvider to your app anywhere inside your app
-                root component.
-            </p>
-            <CodeSnippet language={Language.JSX}>
-                {`<YourAppRoot>
-  <PostHogSurveyProvider>{children}</PostHogSurveyProvider>
-</YourAppRoot>`}
-            </CodeSnippet>
-            <p>You can also pass your client instance to the PostHogSurveyProvider.</p>
-            <CodeSnippet
-                language={Language.JSX}
-            >{`<PostHogSurveyProvider client={posthog}>{children}</PostHogSurveyProvider>`}</CodeSnippet>
-        </>
-    )
-}
-
-export function SDKInstallRNInstructions(props: RNSetupProps): JSX.Element {
-    return (
-        <>
-            <SetupWizardBanner integrationName="React Native" hide={props.hideWizard} />
-            <h3>Install</h3>
-            <RNInstallSnippet includeReplay={props.includeReplay} includeSurveys={props.includeSurveys} />
-            <h3>Configure</h3>
-            <RNSetupSnippet includeReplay={props.includeReplay} />
-            {props.includeSurveys && (
-                <>
-                    <h3>Setup SurveysProvider</h3>
-                    <RNSetupSurveysProvider />
-                </>
-            )}
-        </>
-    )
-}