Skip to content

Latest commit

 

History

History
70 lines (51 loc) · 3.52 KB

humanize.md

File metadata and controls

70 lines (51 loc) · 3.52 KB

Humanize

A Humanize button on the Pattern screen gives the selected notes small random changes in timing and level. It writes them in CE's Micro-move (m) and Volume (V) columns, so the FX slots stay free.

  • Turn it on in Project Settings → Mods → Humanize (for new projects: Config → Mods).
  • Set how far it moves notes in Project Settings → Humanize.
  • Off: the button isn't there.

The pictures are drawn from the firmware's code, at the screen's 800 × 480. The dashed blue outline marks what the mod adds or changes. The font is close to the unit's, not the same.

Humanize some notes

  1. Turn edit mode on with Rec. The button only works in edit mode, and is greyed out otherwise.
  2. Select the notes: hold Shift and move the cursor. With no selection, Humanize takes the cursor's whole track.
  3. Press More until the third page of buttons shows. The dots under More show the page.
  4. Press Humanize.

Undo takes the whole press back.

To see the m and V columns, as in the pictures, put the cursor in the note column and press Note. That is CE's own view: the FX columns show Micro-move and Volume instead. Press Note again to go back.

The Pattern screen in the Micro-move/Volume view: steps 2 to 9 of Tracks 1 and 2 selected, m and V empty; page 3 of the bottom bar with the Humanize button marked

Before: steps 2 to 9 of Tracks 1 and 2 are selected, and their m and V are empty (m---, V---). Marked: the Humanize button. Its place on page 3 depends on which mods are on: here Humanize, Copy to New and Track Length are all on.

The same selection after Humanize: each note now has an m and a V value

After: each note in the selection has an m from 0 to 10 and a V from 45 to 55, the default settings. Steps without a note are left alone. Marked: the changed m and V columns, and the button.

What changes

Humanize changes every step in the selection that has a note. Empty steps and OFF, CUT and FADE are left alone.

  • m (timing): an empty m gets a random value from 0 to the Timing range. A value already there gets a random value in a window of the Timing range around it, within 0 to 100.
  • V (level): an empty V gets a random value in a window of the Volume range around Sample volume (sample instruments) or MIDI velocity (MIDI and synth instruments). A value already there gets a window around itself, within 1 to 100. A V of 0 stays 0.
  • Near a limit the window slides, so it stays inside.
  • A step that has a Micro-move or Volume FX in an FX slot keeps it, and that FX's value is changed instead, since the FX wins over the column when the step plays.

With Color Song on, a humanized block keeps its colour.

Settings

Project Settings → Humanize, saved with the project:

Setting Default What it does
Humanize The mod's switch for this project, as in Project Settings → Mods.
Timing range 10 How far timing moves. An empty m gets 0 to this value.
Volume/velocity On Off: Humanize changes only timing and leaves V alone.
Volume range 10 How wide the window for V is.
MIDI velocity 50 The centre for an empty V on MIDI and synth instruments.
Sample volume 50 The centre for an empty V on sample instruments.

The numbers go from 1 to 100. A project that used Humanize with Modular-Trackular on 1.2.0 brings its settings the first time it opens.